Title: Pd overlayer on Oxygen pre-covered Graphene/Ru(0001): Thermal Stability

Abstract

The behaviors of metal atoms on graphene and graphene oxide are quite important since the composite materials consisting of graphene and transition metal(s) can be employed in numerous technological applications. Despite that the great importance of metal particles on graphene or graphene oxide substrates, fundamental studies of the physical and chemical properties of metal clusters on graphene or graphene oxide are still needed. In this study, in order to elucidate the properties of metal on graphene (GR) and oxygen-precovered graphene (O-GR), the systems consisting of Pd deposited either on to pristine graphene or oxygen-precovered graphene layers have been investigated. The oxygen-precovered graphene was prepared by hot filament method under oxygen atmosphere. Exposure of the graphene layer to atomic oxygen resulted in both intercalation of oxygen between the graphene layer and the Ru(0001) substrate and functionalization of the graphene layer (mainly epoxide formation). Pd deposited onto the oxidized graphene layer interacted strongly with the intercalated oxygen, resulting in intercalation of some of the deposited Pd even at lower temperature than we have seen for Pd on pristine graphene. At the low coverage of 0.25 MLE, Pd mainly formed large planar domains (spreading of Pd on the oxidized graphene layer) and intercalatedmore » between the graphene layer and the Ru substrate at lower temperature due to the interaction between Pd and intercalated oxygen. At higher temperatures, both systems experience the same phenomenon, i.e., the intercalation of all of palladium between the graphene layer and Ru substrate. The intercalated Pd desorbed from the substrate at temperatures >1100 K. At higher Pd coverages, some of the Pd intercalated between the GR and the Ru substrate, while small Pd particles spread on the surface. The structure of the Pd overlayer after the 800 K annealing cycle seems to be very different from that observed at 300 K. The Pd that was present in small clusters spread out on the graphene surface due to the interaction with the intercalated Pd layer through the graphene layer. This interaction stabilized the Pd and even after 1000 K annealing the metal film was stable. After even higher temperature annealing all the Pd intercalated, and then desorbed above 1100 K. The graphene layer preserved its perfect structure (i.e., continuity) without any damage after the intercalation and desorption of Pd. We gratefully acknowledge the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division for the support of this work. The research described in this article was performed at the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the DOE Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle Memorial Institute under contract number DE-AC05-76RL01830. CWY gratefully acknowledges the support of this work by the Sungshin Women’s University Research Grant of 2015.« less

Authors:

Yi, Cheol-Woo W. ^[1]; Szanyi, Janos ^[2]

---

+ Show Author Affiliations

1. UNIVERSITY PROGRAMS
2. BATTELLE (PACIFIC NW LAB)

Publication Date:

Wed Jun 01 00:00:00 EDT 2016

Research Org.:

Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

Sponsoring Org.:

USDOE

OSTI Identifier:

1598849

Report Number(s):

PNNL-SA-111474

DOE Contract Number:  

AC05-76RL01830

Resource Type:

Journal Article

Journal Name:

Surface Science

Additional Journal Information:

Journal Volume: 648

Country of Publication:

United States

Language:

English