skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Sierra/SolidMechanics 4.54 User's Guide: Addendum for Shock Capabilities.

Abstract

This is an addendum to the Sierra/SolidMechanics 4.54 User's Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export control requirements. The ITAR enhancements to Sierra/SM include material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. This document is an addendum only; the standard Sierra/SolidMechanics 4.54 User's Guide should be referenced for most general descriptions of code capability and use.

Authors:
; ; ; ; ; ; ; ; ; ; ; ;
Publication Date:
Research Org.:
Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sandia National Laboratories, Livermore, CA
Sponsoring Org.:
USDOE National Nuclear Security Administration (NNSA)
OSTI Identifier:
1569142
Report Number(s):
SAND2019-10966
679615
DOE Contract Number:  
AC04-94AL85000
Resource Type:
Technical Report
Country of Publication:
United States
Language:
English

Citation Formats

Veilleux, Michael, Beckwith, Frank, Belcourt, Kenneth Noel, de Frias, Gabriel Jose, Manktelow, Kevin, Merewether, Mark Thomas, Miller, Scott T, Mosby, Matthew David, Plews, Julia A., Porter, Vicki L., Shelton, Timothy, Thomas, Jesse David, and Tupek, Michael R. Sierra/SolidMechanics 4.54 User's Guide: Addendum for Shock Capabilities.. United States: N. p., 2019. Web. doi:10.2172/1569142.
Veilleux, Michael, Beckwith, Frank, Belcourt, Kenneth Noel, de Frias, Gabriel Jose, Manktelow, Kevin, Merewether, Mark Thomas, Miller, Scott T, Mosby, Matthew David, Plews, Julia A., Porter, Vicki L., Shelton, Timothy, Thomas, Jesse David, & Tupek, Michael R. Sierra/SolidMechanics 4.54 User's Guide: Addendum for Shock Capabilities.. United States. doi:10.2172/1569142.
Veilleux, Michael, Beckwith, Frank, Belcourt, Kenneth Noel, de Frias, Gabriel Jose, Manktelow, Kevin, Merewether, Mark Thomas, Miller, Scott T, Mosby, Matthew David, Plews, Julia A., Porter, Vicki L., Shelton, Timothy, Thomas, Jesse David, and Tupek, Michael R. Sun . "Sierra/SolidMechanics 4.54 User's Guide: Addendum for Shock Capabilities.". United States. doi:10.2172/1569142. https://www.osti.gov/servlets/purl/1569142.
@article{osti_1569142,
title = {Sierra/SolidMechanics 4.54 User's Guide: Addendum for Shock Capabilities.},
author = {Veilleux, Michael and Beckwith, Frank and Belcourt, Kenneth Noel and de Frias, Gabriel Jose and Manktelow, Kevin and Merewether, Mark Thomas and Miller, Scott T and Mosby, Matthew David and Plews, Julia A. and Porter, Vicki L. and Shelton, Timothy and Thomas, Jesse David and Tupek, Michael R.},
abstractNote = {This is an addendum to the Sierra/SolidMechanics 4.54 User's Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export control requirements. The ITAR enhancements to Sierra/SM include material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. This document is an addendum only; the standard Sierra/SolidMechanics 4.54 User's Guide should be referenced for most general descriptions of code capability and use.},
doi = {10.2172/1569142},
journal = {},
number = ,
volume = ,
place = {United States},
year = {2019},
month = {9}
}