skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Deuterium retention in re-solidified tungsten and beryllium

Journal Article · · Nuclear Materials and Energy

Leading edges of the ITER tungsten (W) divertor are expected to melt due to transient heat loads from edge localized modes (ELMs), and melting of the entire divertor surface will occur during vertical displacement events (VDEs) and disruptions. In addition, understanding tritium retention in plasma facing materials is critical for the successful operation of ITER due to safety reasons. Thus, the question of how melting affects hydrogenic retention is highly relevant for fusion devices. Here we use an Nd:YAG laser to melt tungsten and beryllium in vacuo, and the samples are subsequently exposed to deuterium plasma with sample temperatures ranging from 370 to 750 K. The deuterium content in re-solidified and reference (no laser) samples is measured using thermal desorption spectroscopy and modeled using TMAP-7. In all cases, the re-solidified samples have lower retention compared to the reference samples. For re-solidified tungsten, the most significant effect is in the 1.8 eV trap with peak thermal desorption temperature of ~750 K, which had a 77% reduction in the peak release rate compared with the reference sample. SEM imaging indicates that laser melting and re-solidification of tungsten anneals intrinsic defects that act as nucleation sites for larger-scale defects that develop during plasma exposure. However, melting does not significantly affect traps with lower de-trapping energies of 1.0 eV and 1.4 eV. In beryllium, melting and cracking results in lower retention compared to the reference sample by 40%, and thermal desorption profiles indicate that the diffusion depth of deuterium into re-solidified beryllium is lower than that of the reference sample.

Research Organization:
Univ. of California, San Diego, CA (United States)
Sponsoring Organization:
USDOE Office of Science (SC)
Grant/Contract Number:
FG02-07ER54912
OSTI ID:
1547829
Alternate ID(s):
OSTI ID: 1609932
Journal Information:
Nuclear Materials and Energy, Journal Name: Nuclear Materials and Energy Vol. 18 Journal Issue: C; ISSN 2352-1791
Publisher:
ElsevierCopyright Statement
Country of Publication:
Netherlands
Language:
English
Citation Metrics:
Cited by: 8 works
Citation information provided by
Web of Science

References (30)

Fundamental aspects of deuterium retention in tungsten at high flux plasma exposure journal August 2015
Laser induced desorption as tritium retention diagnostic method in ITER journal October 2011
Deuterium thermal desorption from vacancy clusters in tungsten journal September 2016
Transient induced tungsten melting at the Joint European Torus (JET) journal September 2017
ITER-relevant transient heat loads on tungsten exposed to plasma and beryllium journal April 2014
Tritium removal from JET and TFTR tiles by a scanning laser journal March 2003
Laser-based and thermal methods for fuel removal and cleaning of plasma-facing components journal August 2011
Hydrogen exchange with voids in tungsten observed with TDS and PA journal July 1988
Hydrogen isotope transport across tungsten surfaces exposed to a fusion relevant He ion fluence journal May 2017
In-Situ Measurement of Trapped Hydrogen by Laser Desorption in TEXTOR-94 journal January 2001
Deuterium desorption from tungsten using laser heating journal August 2017
Modelling deuterium release during thermal desorption of D+-irradiated tungsten journal March 2008
Retention and thermal release of deuterium implanted in beryllium journal May 1984
Expanding the capability of reaction-diffusion codes using pseudo traps and temperature partitioning: Applied to hydrogen uptake and release from tungsten journal September 2018
Physics conclusions in support of ITER W divertor monoblock shaping journal August 2017
Hydrogen isotope retention and recycling in fusion reactor plasma-facing components journal February 2002
Deuterium retention and thermal conductivity in ion-beam displacement-damaged tungsten journal August 2017
The Influence of a Beryllium Containing Plasma on the Evolution of a Mixed-Material Surface journal January 2004
Transport Phenomena and Keyhole Dynamics during Pulsed Laser Welding journal December 2005
Damage and deuterium retention of re-solidified tungsten following vertical displacement event-like heat load journal August 2017
Laser re-melting of tungsten damaged by transient heat loads journal December 2016
Influence of the microstructure on the deuterium retention in tungsten journal August 2011
Movement of liquid beryllium during melt events in JET with ITER-like wall journal April 2014
Deuterium retention in tungsten under combined high cycle ELM-like heat loads and steady-state plasma exposure journal December 2016
Temperature dependence of surface morphology and deuterium retention in polycrystalline ITER-grade tungsten exposed to low-energy, high-flux D plasma journal January 2012
Strong sub-surface plastic deformation induced by high flux plasma in tungsten journal November 2017
Hydrogen in tungsten as plasma-facing material journal December 2011
The effect of high-flux H plasma exposure with simultaneous transient heat loads on tungsten surface damage and power handling journal November 2014
Beryllium as the plasma-facing material in fusion energy systems—experiments, evaluation, and comparison with alternative materials journal November 1997
Plasma-material interactions in current tokamaks and their implications for next step fusion reactors journal December 2001