skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Synopsis of Mechanical Aging and Fatigue Testing of Llama50 Ink for Direct-Ink-Write 3D Printing

Abstract

This document provides a brief synopsis of the results of mechanical aging (thermal and radiation) and fatigue testing of Llama50, an LLNL-made 50A durometer siloxane resin for direct-ink-writing (DIW) with low-temperature capability. Aging studies were performed on both bulk and DIW printed specimens. The fatigue test was performed on DIW printed specimens.

Authors:
 [1];  [1];  [1];  [1];  [1];  [1];  [1];  [1];  [1]
  1. Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
Publication Date:
Research Org.:
Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
Sponsoring Org.:
USDOE National Nuclear Security Administration (NNSA)
OSTI Identifier:
1544974
Report Number(s):
LLNL-TR-770517
961526
DOE Contract Number:  
AC52-07NA27344
Resource Type:
Technical Report
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE

Citation Formats

Small, Ward, Bryson, Taylor M., Maiti, Amitesh, Choi, B. William, Freeman, Dennis C., Lenhardt, Jeremy M., Lewicki, James P., Wilson, Thomas S., and Duoss, Eric B. Synopsis of Mechanical Aging and Fatigue Testing of Llama50 Ink for Direct-Ink-Write 3D Printing. United States: N. p., 2019. Web. doi:10.2172/1544974.
Small, Ward, Bryson, Taylor M., Maiti, Amitesh, Choi, B. William, Freeman, Dennis C., Lenhardt, Jeremy M., Lewicki, James P., Wilson, Thomas S., & Duoss, Eric B. Synopsis of Mechanical Aging and Fatigue Testing of Llama50 Ink for Direct-Ink-Write 3D Printing. United States. doi:10.2172/1544974.
Small, Ward, Bryson, Taylor M., Maiti, Amitesh, Choi, B. William, Freeman, Dennis C., Lenhardt, Jeremy M., Lewicki, James P., Wilson, Thomas S., and Duoss, Eric B. Wed . "Synopsis of Mechanical Aging and Fatigue Testing of Llama50 Ink for Direct-Ink-Write 3D Printing". United States. doi:10.2172/1544974. https://www.osti.gov/servlets/purl/1544974.
@article{osti_1544974,
title = {Synopsis of Mechanical Aging and Fatigue Testing of Llama50 Ink for Direct-Ink-Write 3D Printing},
author = {Small, Ward and Bryson, Taylor M. and Maiti, Amitesh and Choi, B. William and Freeman, Dennis C. and Lenhardt, Jeremy M. and Lewicki, James P. and Wilson, Thomas S. and Duoss, Eric B.},
abstractNote = {This document provides a brief synopsis of the results of mechanical aging (thermal and radiation) and fatigue testing of Llama50, an LLNL-made 50A durometer siloxane resin for direct-ink-writing (DIW) with low-temperature capability. Aging studies were performed on both bulk and DIW printed specimens. The fatigue test was performed on DIW printed specimens.},
doi = {10.2172/1544974},
journal = {},
number = ,
volume = ,
place = {United States},
year = {2019},
month = {3}
}