skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Experimental and Numerical Investigation of Sweeping Jet Film Cooling

Abstract

Not provided.

Authors:
 [1];  [2];  [3];  [4];  [5];  [6]
  1. Department of Mechanical andAerospace Engineering,Aerospace Research Center,The Ohio State University,Columbus, OH 43235e-mail: hossain.49@osu.edu
  2. Department of Mechanical andAerospace Engineering,Aerospace Research Center,The Ohio State University,Columbus, OH 43235e-mail: prenter.1@osu.edu
  3. Department of Mechanical andAerospace Engineering,Aerospace Research Center,The Ohio State University,Columbus, OH 43235e-mail: ryanlundgreen@gmail.com
  4. Department of Mechanical andAerospace Engineering,Aerospace Research Center,The Ohio State University,Columbus, OH 43235e-mail: ameri.1@osu.edu
  5. Department of Mechanical andAerospace Engineering,Aerospace Research Center,The Ohio State University,Columbus, OH 43235e-mail: gregory.234@osu.edu
  6. Department of Mechanical andAerospace Engineering,Aerospace Research Center,The Ohio State University,Columbus, OH 43235e-mail: bons.2@osu.edu
Publication Date:
Research Org.:
The Ohio State Univ., Columbus, OH (United States)
Sponsoring Org.:
USDOE Office of Fossil Energy (FE)
OSTI Identifier:
1541648
DOE Contract Number:  
FE0025320
Resource Type:
Journal Article
Journal Name:
Journal of Turbomachinery
Additional Journal Information:
Journal Volume: 140; Journal Issue: 3; Journal ID: ISSN 0889-504X
Publisher:
ASME
Country of Publication:
United States
Language:
English
Subject:
Engineering

Citation Formats

Hossain, Mohammad A., Prenter, Robin, Lundgreen, Ryan K., Ameri, Ali, Gregory, James W., and Bons, Jeffrey P. Experimental and Numerical Investigation of Sweeping Jet Film Cooling. United States: N. p., 2017. Web. doi:10.1115/1.4038690.
Hossain, Mohammad A., Prenter, Robin, Lundgreen, Ryan K., Ameri, Ali, Gregory, James W., & Bons, Jeffrey P. Experimental and Numerical Investigation of Sweeping Jet Film Cooling. United States. doi:10.1115/1.4038690.
Hossain, Mohammad A., Prenter, Robin, Lundgreen, Ryan K., Ameri, Ali, Gregory, James W., and Bons, Jeffrey P. Thu . "Experimental and Numerical Investigation of Sweeping Jet Film Cooling". United States. doi:10.1115/1.4038690.
@article{osti_1541648,
title = {Experimental and Numerical Investigation of Sweeping Jet Film Cooling},
author = {Hossain, Mohammad A. and Prenter, Robin and Lundgreen, Ryan K. and Ameri, Ali and Gregory, James W. and Bons, Jeffrey P.},
abstractNote = {Not provided.},
doi = {10.1115/1.4038690},
journal = {Journal of Turbomachinery},
issn = {0889-504X},
number = 3,
volume = 140,
place = {United States},
year = {2017},
month = {12}
}

Works referenced in this record:

Effect of Geometry Variations on the Cooling Performance of Fan-Shaped Cooling Holes
journal, August 2012

  • Saumweber, Christian; Schulz, Achmed
  • Journal of Turbomachinery, Vol. 134, Issue 6
  • DOI: 10.1115/1.4006290

Adiabatic Wall Effectiveness Measurements of Film-Cooling Holes With Expanded Exits
journal, July 1998

  • Gritsch, M.; Schulz, A.; Wittig, S.
  • Journal of Turbomachinery, Vol. 120, Issue 3
  • DOI: 10.1115/1.2841752

A Converging Slot-Hole Film-Cooling Geometry—Part 1: Low-Speed Flat-Plate Heat Transfer and Loss
journal, July 2002

  • Sargison, J. E.; Guo, S. M.; Oldfield, M. L. G.
  • Journal of Turbomachinery, Vol. 124, Issue 3
  • DOI: 10.1115/1.1459735

Flowfield Measurements for Film-Cooling Holes With Expanded Exits
journal, April 1998

  • Thole, K.; Gritsch, M.; Schulz, A.
  • Journal of Turbomachinery, Vol. 120, Issue 2
  • DOI: 10.1115/1.2841410

A Novel Antivortex Turbine Film-Cooling Hole Concept
journal, May 2008

  • Heidmann, James D.; Ekkad, Srinath
  • Journal of Turbomachinery, Vol. 130, Issue 3
  • DOI: 10.1115/1.2777194

Film Cooling From a Row of Holes Supplemented With Antivortex Holes
journal, January 2009

  • Dhungel, Alok; Lu, Yiping; Phillips, Wynn
  • Journal of Turbomachinery, Vol. 131, Issue 2
  • DOI: 10.1115/1.2950059

Film-Cooling Performance of Antivortex Hole on a Flat Plate
journal, September 2013

  • LeBlanc, Christopher; Narzary, Diganta P.; Ekkad, Srinath
  • Journal of Turbomachinery, Vol. 135, Issue 6
  • DOI: 10.1115/1.4023436

Investigation of Spiral and Sweeping Holes
journal, April 2016

  • Thurman, Douglas; Poinsatte, Philip; Ameri, Ali
  • Journal of Turbomachinery, Vol. 138, Issue 9
  • DOI: 10.1115/1.4032839

Lagrangian coherent structures in the flow field of a fluidic oscillator
journal, September 2016


Film Cooling Effectiveness and Heat Transfer Near Deposit-Laden Film Holes
journal, November 2010

  • Lewis, Scott; Barker, Brett; Bons, Jeffrey P.
  • Journal of Turbomachinery, Vol. 133, Issue 3
  • DOI: 10.1115/1.4001190

Discharge Coefficient Measurements of Film-Cooling Holes With Expanded Exits
journal, July 1998

  • Gritsch, M.; Schulz, A.; Wittig, S.
  • Journal of Turbomachinery, Vol. 120, Issue 3
  • DOI: 10.1115/1.2841753

Characterization of the Microfluidic Oscillator
journal, March 2007

  • Gregory, James W.; Sullivan, John P.; Raman, Ganesh
  • AIAA Journal, Vol. 45, Issue 3
  • DOI: 10.2514/1.26127

Effects of Very High Free-Stream Turbulence on the Jet–Mainstream Interaction in a Film Cooling Flow
journal, October 1998

  • Kohli, A.; Bogard, D. G.
  • Journal of Turbomachinery, Vol. 120, Issue 4
  • DOI: 10.1115/1.2841790

Performance Study of a Fluidic Hammer Controlled by an Output-Fed Bistable Fluidic Oscillator
journal, October 2016

  • Zhang, Xinxin; Peng, Jianming; Ge, Dong
  • Applied Sciences, Vol. 6, Issue 10
  • DOI: 10.3390/app6100305

Two-equation eddy-viscosity turbulence models for engineering applications
journal, August 1994