Skip to main content
OSTI.GOVU.S. Department of Energy Office of Scientific and Technical Information
U.S. Department of Energy
Office of Scientific and Technical Information
 

Electrolyte-resistant epoxy for bonding batteries based on sandwich structures: Research Article

Journal Article · · Journal of Applied Polymer Science
DOI:https://doi.org/10.1002/app.46059· OSTI ID:1537497
 [1];  [2];  [3];  [3];  [2];  [3];  [1]
  1. Department of Materials Science and Engineering, The Pennsylvania State University, University Park Pennsylvania 16802
  2. Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park Pennsylvania 16802
  3. Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park Pennsylvania 16802
+ Show Author Affiliations

Not provided.

Research Organization:
Pennsylvania State Univ., University Park, PA (United States)
Sponsoring Organization:
USDOE Advanced Research Projects Agency - Energy (ARPA-E)
DOE Contract Number:
AR0000383
OSTI ID:
1537497
Journal Information:
Journal of Applied Polymer Science, Vol. 135, Issue 15; ISSN 0021-8995
Publisher:
Wiley
Country of Publication:
United States
Language:
English

References (37)

Multifunctional structural lithium-ion battery for electric vehicles November 2016
Effects of aramid-fibre toughening on interfacial fracture toughness of epoxy adhesive joint between carbon-fibre face sheet and aluminium substrate January 2014
Polyurethane structural adhesives applied in automotive composite joints May 2012
Adhesive bonding of aluminium with structural acrylic adhesives: durability in wet environments January 2006
Study on Vinyl Ester Based Structural Anchor Adhesive for Fast, Low Temperature Cures April 2014
Influence of water immersion on the single-lap shear strength of aluminum joints bonded with aluminum-powder-filled epoxy adhesive January 2004
A designers' guide to engineering polymer technology February 1998
Adhesion and adhesive performance: the scientific background January 1988
The durability of adhesive joints in the presence of water May 1996
Thermal stability of high temperature epoxy adhesives by thermogravimetric and adhesive strength measurements October 2011
Effect of fillers on the degradation of automotive epoxy adhesives in aqueous solutions: Part I Absorption of water by different fillers-incorporated automotive epoxy adhesives November 1993
Effect of surface pre-treatment on the adhesive strength of epoxy–aluminium joints January 2009
Dynamic viscoelastic properties and thermal properties of Ni powder-epoxy resin composites September 1998
Combined effects of silica filler and its interface in epoxy resin October 2002
Effect of filler addition on the compressive and impact properties of glass fibre reinforced epoxy April 2001
Degradation of crosslinked resins in water and electrolyte solutions November 1982
Toxicity of materials used in the manufacture of lithium batteries March 1995
Hansen Solubility Parameters June 2007
Effect of Calculation Method on Values of Hansen Solubility Parameters of Polymers April 2006
A new procedure for calculating Hansen solubility parameters of carbon nanotube/polymer composites August 2011
Prediction of Hansen Solubility Parameters with a New Group-Contribution Method April 2008
Effects of various liquid organic solvents on solvent-induced crystallization of amorphous poly(lactic acid) film December 2012
The Universality of the Solubility Parameter March 1969
Hildebrand and Hansen solubility parameters from Molecular Dynamics with applications to electronic nose polymer sensors January 2004
The mechanisms of elevated temperature property losses in high performance structural epoxy resin matrix materials after exposures to high humidity environments January 1978
A Raman spectroscopic study of organic electrolyte solutions based on binary solvent systems of ethylene carbonate with low viscosity solvents which dissolve different lithium salts January 1998
Adhesion and durability of metal-polymer bonds August 1984
Effect of epoxy–amine stoichiometry on cured resin material properties December 1992
Relationships between stoichiometry, microstructure, and properties for amine-cured epoxies January 1999
Water absorption in epoxy resins: The effects of the crosslinking agent and curing temperature January 2005
Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEA June 2013
Cure kinetics of epoxy resins studied by non-isothermal DSC data February 2002
Curing kinetics study of epoxy resin/flexible amine toughness systems by dynamic and isothermal DSC July 2008
DSC and TBA studies of the curing behavior of two dicy-containing epoxy resins March 1979
Kinetic studies of an epoxy cure reaction by isothermal DSC analysis January 2000
The glass transition temperature (Tg) as an index of chemical conversion for a high-Tg amine/epoxy system: Chemical and diffusion-controlled reaction kinetics January 1990
Design, manufacture and test of a novel structural battery based on sandwich construction June 2015

Similar Records

Related Subjects

Polymer Science