skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Design optimization and validation of high-performance heat exchangers using approximation assisted optimization and additive manufacturing

Abstract

Not provided.

Authors:
 [1]; ORCiD logo [1];  [1];  [1]
  1. University of Maryland, College Park, 4164 Martin Hall, College Park, MD 20942, USA
Publication Date:
Research Org.:
Univ. of Maryland, College Park, MD (United States)
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
OSTI Identifier:
1535431
DOE Contract Number:  
EE0006114
Resource Type:
Journal Article
Journal Name:
Science and Technology for the Built Environment
Additional Journal Information:
Journal Volume: 23; Journal Issue: 6; Journal ID: ISSN 2374-4731
Publisher:
Taylor & Francis
Country of Publication:
United States
Language:
English
Subject:
Thermodynamics; Construction & Building Technology; Engineering

Citation Formats

Bacellar, Daniel, Aute, Vikrant, Huang, Zhiwei, and Radermacher, Reinhard. Design optimization and validation of high-performance heat exchangers using approximation assisted optimization and additive manufacturing. United States: N. p., 2017. Web. doi:10.1080/23744731.2017.1333877.
Bacellar, Daniel, Aute, Vikrant, Huang, Zhiwei, & Radermacher, Reinhard. Design optimization and validation of high-performance heat exchangers using approximation assisted optimization and additive manufacturing. United States. doi:10.1080/23744731.2017.1333877.
Bacellar, Daniel, Aute, Vikrant, Huang, Zhiwei, and Radermacher, Reinhard. Mon . "Design optimization and validation of high-performance heat exchangers using approximation assisted optimization and additive manufacturing". United States. doi:10.1080/23744731.2017.1333877.
@article{osti_1535431,
title = {Design optimization and validation of high-performance heat exchangers using approximation assisted optimization and additive manufacturing},
author = {Bacellar, Daniel and Aute, Vikrant and Huang, Zhiwei and Radermacher, Reinhard},
abstractNote = {Not provided.},
doi = {10.1080/23744731.2017.1333877},
journal = {Science and Technology for the Built Environment},
issn = {2374-4731},
number = 6,
volume = 23,
place = {United States},
year = {2017},
month = {4}
}

Works referenced in this record:

Approximation-Assisted Optimization for Novel Compact Heat Exchanger Designs
journal, September 2010


Two- and three-dimensional numerical models of flow and heat transfer over louvred fin arrays in compact heat exchangers
journal, October 1998

  • Atkinsona, K. N.; Drakulic, R.; Heikal, M. R.
  • International Journal of Heat and Mass Transfer, Vol. 41, Issue 24
  • DOI: 10.1016/S0017-9310(98)00165-3

Optimization of Heat Exchanger Enhanced Surfaces through Multiobjective Genetic Algorithms
journal, August 2008

  • Cavazzuti, M.; Corticelli, M. A.
  • Numerical Heat Transfer, Part A: Applications, Vol. 54, Issue 6
  • DOI: 10.1080/10407780802289335

Numerical and experimental study of natural convection heat transfer characteristics for vertical plate fin and tube heat exchangers with various tube diameters
journal, September 2016


Flow and heat transfer in compact louvered fin surfaces
journal, February 1995


Localized flow and heat transfer interactions in louvered-fin arrays
journal, January 2003


Heat transfer in automobile radiators of the tubular type
journal, January 1985

  • Dittus, F. W.; Boelter, L. M. K.
  • International Communications in Heat and Mass Transfer, Vol. 12, Issue 1
  • DOI: 10.1016/0735-1933(85)90003-X

Computational optimization of the thermal performance of internally finned ducts
journal, August 2009


A genetic algorithm for fin profile optimization
journal, June 1997


Heat transfer optimization in internally finned tubes under laminar flow conditions
journal, May 1998


Optimization of micro heat exchanger: CFD, analytical approach and multi-objective evolutionary algorithms
journal, March 2006


Heat transfer and pressure drop of perforated surface heat exchanger with passage enlargement and contraction
journal, January 1988

  • Masao, Fujii; Yu, Seshimo; Goro, Yamanaka
  • International Journal of Heat and Mass Transfer, Vol. 31, Issue 1
  • DOI: 10.1016/0017-9310(88)90230-X

Heat transfer enhancement and pressure drop for fin-and-tube compact heat exchangers with wavy rectangular winglet-type vortex generators
journal, May 2014


Review of utilization of genetic algorithms in heat transfer problems
journal, April 2009


Multi-objective shape optimization of a heat exchanger using parallel genetic algorithms
journal, July 2006


3-D thermal-hydraulic analysis for louver fin heat exchangers with variable louver angle
journal, October 2006


A model for air-to-refrigerant microchannel condensers with variable tube and fin geometries
journal, April 2014


Performance enhancement of a louvered fin heat exchanger by using delta winglet vortex generators
journal, January 2013


Conjugate Heat Transfer in Air-to-Refrigerant Airfoil Heat Exchangers
journal, May 2014

  • Ito, Yutaka; Inokura, Naoya; Nagasaki, Takao
  • Journal of Heat Transfer, Vol. 136, Issue 8
  • DOI: 10.1115/1.4027554

Heat transfer surface enhancement through the use of longitudinal vortices: A review of recent progress
journal, October 1995


Air-Side Flow and Heat Transfer in Compact Heat Exchangers: A Discussion of Enhancement Mechanisms
journal, January 1998


CoilDesigner: a general-purpose simulation and design tool for air-to-refrigerant heat exchangers
journal, June 2006


Impact of leading edge delta-wing vortex generators on the thermal performance of a flat tube, louvered-fin compact heat exchanger
journal, April 2005


The Basic Heat Transfer and Flow Friction Characteristics of Six Compact High-Performance Heat Transfer Surfaces
journal, January 1960

  • Kays, W. M.
  • Journal of Engineering for Power, Vol. 82, Issue 1
  • DOI: 10.1115/1.3672713

Air-side thermal hydraulic performance of multi-louvered fin aluminum heat exchangers
journal, May 2002


Experimental study of convective heat transfer from in-line cam shaped tube bank in crossflow
journal, April 2014


Correlations and shape optimization in a channel with aligned dimples and protrusions
journal, September 2013


A numerical investigation of louvered fin-and-tube heat exchangers having circular and oval tube configurations
journal, November 2001

  • Leu, Jin-Sheng; Liu, Min-Sheng; Liaw, Jane-Sunn
  • International Journal of Heat and Mass Transfer, Vol. 44, Issue 22
  • DOI: 10.1016/S0017-9310(01)00081-3

Numerical study on a slit fin-and-tube heat exchanger with longitudinal vortex generators
journal, April 2011


Heat Transfer Enhancement Using Shaped Polymer Tubes: Fin Analysis
journal, April 2004

  • Li, Zhihua; Davidson, Jane H.; Mantell, Susan C.
  • Journal of Heat Transfer, Vol. 126, Issue 2
  • DOI: 10.1115/1.1683663

A numerical study on the air-side heat transfer of perforated finned-tube heat exchangers with large fin pitches
journal, September 2016


Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output from a Computer Code
journal, May 1979


Numerical Analyses of Effects of Tube Shape on Performance of a Finned Tube Heat Exchanger
journal, January 2004


Influence of channel shape on the thermal and hydraulic performance of microchannel heat sink
journal, April 2011


Geometric Parameterization and Multiobjective Shape Optimization of Convective Periodic Channels
journal, November 2006

  • Nobile, E.; Pinto, F.; Rizzetto, G.
  • Numerical Heat Transfer, Part B: Fundamentals, Vol. 50, Issue 5
  • DOI: 10.1080/10407790600646792

Experimental study of forced convection heat transfer from a cam shaped tube in cross flows
journal, July 2007


Thermal-hydraulic CFD study in louvered fin-and-flat-tube heat exchangers
journal, June 2004


Genetic algorithms for thermosciences research: application to the optimized cooling of electronic components
journal, April 1994

  • Queipo, N.; Devarakonda, R.; Humphrey, J. A. C.
  • International Journal of Heat and Mass Transfer, Vol. 37, Issue 6
  • DOI: 10.1016/0017-9310(94)90215-1

Multi-objective shape optimization of a tube bundle in cross-flow
journal, January 2014


Quantification of Uncertainty in Computational Fluid Dynamics
journal, January 1997


A comprehensive framework for verification, validation, and uncertainty quantification in scientific computing
journal, June 2011

  • Roy, Christopher J.; Oberkampf, William L.
  • Computer Methods in Applied Mechanics and Engineering, Vol. 200, Issue 25-28
  • DOI: 10.1016/j.cma.2011.03.016

Development of a compact laminar flow heat exchanger with stainless steel micro-tubes
journal, May 2001


Thermal-hydraulic performance optimization of inline and staggered fin-tube compact heat exchangers applying longitudinal vortex generators
journal, February 2016


Realizability of Reynolds-stress turbulence models
journal, January 1977


Experimental study of frost accumulation on fan-supplied tube-fin evaporators
journal, May 2011


Direct Numerical Simulation of Heat Transfer in Converging–Diverging Wavy Channels
journal, August 2006

  • Stalio, E.; Piller, M.
  • Journal of Heat Transfer, Vol. 129, Issue 7
  • DOI: 10.1115/1.2717235

Fluid flow and heat transfer in wavy microchannels
journal, June 2010


Flow transition in a multilouvered fin array
journal, March 2000


3D numerical simulation on fluid flow and heat transfer characteristics in multistage heat exchanger with slit fins
journal, January 2007


Interaction between mean flow and thermo-hydraulic behaviour in inclined louvered fins
journal, January 2011


Heat transfer enhancement in cross-flow heat exchangers using oval tubes and multiple delta winglets
journal, July 2003


High-performance heat sinking for VLSI
journal, May 1981


Effects of Waffle Height on the Air-Side Performance of Wavy Fin-and-Tube Heat Exchangers
journal, August 1999


Comprehensive Study of Convex-Louver and Wavy Fin-and-Tube Heat Exchangers
journal, July 1998

  • Wang, Chi-Chuan; Tsai, Yu-Min; Lu, Ding-Chong
  • Journal of Thermophysics and Heat Transfer, Vol. 12, Issue 3
  • DOI: 10.2514/2.6354

Investigation of heat transfer characteristics on various kinds of fin-and-tube heat exchangers with interrupted surfaces
journal, July 1999


Influence of design parameters on the heat transfer and flow friction characteristics of the heat exchanger with slit fins
journal, July 2000


Analysis of Flow and Heat Transfer Characteristics Around an Oval-Shaped Cylinder
journal, February 2014

  • Zhang, Guan-Min; Tian, Mao-Cheng; Zhou, Nai-Xiang
  • Journal of Heat Transfer, Vol. 136, Issue 4
  • DOI: 10.1115/1.4026006