skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Simulation of net spacers in membrane modules for carbon dioxide capture

Journal Article · · Separation Science and Technology
 [1];  [2];  [3];  [2];  [3];  [3]
  1. ProSep, Houston, Texas, USA
  2. Department of Chemical &, Environmental Engineering, The University of Toledo, Toledo, Ohio, USA
  3. Membrane Technology and Research, Inc., Newark, California, USA

Not provided.

Research Organization:
Membrane Technology and Research, Inc., Newark, CA (United States)
Sponsoring Organization:
USDOE Office of Fossil Energy (FE)
DOE Contract Number:
FE0007553
OSTI ID:
1535374
Journal Information:
Separation Science and Technology, Vol. 52, Issue 2; ISSN 0149-6395
Publisher:
Taylor & Francis
Country of Publication:
United States
Language:
English

References (36)

Mass Transfer (Absorption) Coefficients Prediction from Data on Heat Transfer and Fluid Friction journal November 1934
Heat Transfer and Pressure Drop in Empty, Baffled, and Packed Tubes 1 journal August 1931
III—Relationship between Heat Transfer and Pressure Drop 1 journal August 1931
Heat Transfer and Pressure Drop of Liquids in Tubes journal December 1936
Spiral wound modules and spacers journal October 2004
CFD simulations of net-type turbulence promoters in a narrow channel journal April 2001
Laminar flow and mass transfer in channels with a porous bottom wall and with fins attached to the top wall journal April 2000
Flow and mass transfer modelling of nanofiltration journal September 2001
Numerical modelling of mass transfer in slits with semi‐permeable membrane walls journal May 2000
Hydrodynamics and concentration polarization in NF/RO spiral-wound modules with ladder-type spacers journal August 2003
Modelling of flow and concentration patterns in spiral wound membrane modules with ladder-type spacers journal November 2006
Investigation of flow patterns and mass transfer in membrane module channels filled with flow-aligned spacers using computational fluid dynamics (CFD) journal November 2007
Simulation of the Flow around Spacer Filaments between Narrow Channel Walls. 1. Hydrodynamics journal June 2002
Simulation of the Flow around Spacer Filaments between Channel Walls. 2. Mass-Transfer Enhancement journal September 2002
A CFD study of unsteady flow in narrow spacer-filled channels for spiral-wound membrane modules journal September 2002
Impact of different spacer filaments geometries on 2D unsteady hydrodynamics and concentration polarization in spiral wound membrane channel journal December 2006
Effect of Feed Spacer Mesh Length Ratio on Unsteady Hydrodynamics in 2D Spiral Wound Membrane (SWM) Channel journal June 2010
Unsteady Flows with Mass Transfer in Narrow Zigzag Spacer-Filled Channels:  A Numerical Study journal September 2006
Numerical study of two-dimensional multi-layer spacer designs for minimum drag and maximum mass transfer journal December 2008
Laminar Flow Transitions in a 2D Channel with Circular Spacers journal August 2007
Flow visualization through spacer filled channels by computational fluid dynamics I.☆Pressure drop and shear rate calculations for flat sheet geometry journal October 2001
Fluid dynamics of spacer filled rectangular and curvilinear channels journal March 2006
Comparison of flow structures in spacer-filled flat and annular channels journal May 2006
Optimization of non-woven spacers by CFD and validation by experiments journal September 2002
Optimization of commercial net spacers in spiral wound membrane modules journal October 2002
Experimental validation of CFD mass transfer simulations in flat channels with non-woven net spacers journal March 2004
Effect of feed spacer arrangement on flow dynamics through spacer filled membranes journal January 2012
Study on the effects of spacer geometry in membrane feed channels using three-dimensional computational flow modeling journal July 2007
CFD modeling for flow and mass transfer in spacer-obstructed membrane feed channels journal January 2009
CFD simulation of fluid flow through spacer-filled membrane module: selecting suitable cell types for periodic boundary conditions journal December 2008
The effect of curvature of a spacer-filled channel on fluid flow in spiral-wound membrane modules journal July 2008
Three-dimensional modeling of biofouling and fluid dynamics in feed spacer channels of membrane devices journal December 2009
Biofouling in spiral wound membrane systems: Three-dimensional CFD model based evaluation of experimental data journal January 2010
Review of 3D CFD modeling of flow and mass transfer in narrow spacer-filled channels in membrane modules journal July 2010
Mass transfer and pressure loss in spiral wound modules journal January 1987
Gas/gas membrane contactors – An emerging membrane unit operation journal July 2014