Characterization of Fe-Co soft ferromagnetic alloys processed by laser engineered net shaping (LENS).

Kustas, Andrew; Johnson, Kyle; Whetten, Shaun R; Keicher, David M; Rodriguez, Mark A.; Dagel, Daryl; Michael, Joseph R.; Argibay, Nicolas; Susan, Donald F.

doi:10.1016/j.addma.2018.02.006

Characterization of Fe-Co soft ferromagnetic alloys processed by laser engineered net shaping (LENS).

Conference · 01 November 2017

DOI:https://doi.org/10.1016/j.addma.2018.02.006· OSTI ID:1511551

Kustas, Andrew; Johnson, Kyle; Whetten, Shaun R; Keicher, David M; Rodriguez, Mark A.; Dagel, Daryl; Michael, Joseph R.; Argibay, Nicolas; Susan, Donald F.

Abstract not provided.

View Conference

Research Organization:: Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

DOE Contract Number:: AC04-94AL85000;

OSTI ID:: 1511551

Report Number(s):: SAND2017-12490C; 658807

Conference Information:: Proposed for presentation at the 18th International Conference on Textures of Materials held November 5-10, 2017 in St. George, UT.

Country of Publication:: United States

Language:: English

References (48)

Effect of additive elements on cold workability in FeCo alloys Kawahara, Kohji Journal of Materials Science, Vol. 18, Issue 6 https://doi.org/10.1007/BF00542066	journal	June 1983
The rapid solidification processing of materials: science, principles, technology, advances, and applications Lavernia, Enrique J.; Srivatsan, T. S. Journal of Materials Science, Vol. 45, Issue 2, p. 287-325 https://doi.org/10.1007/s10853-009-3995-5	journal	December 2009
Thermal Behavior and Microstructural Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part I. Numerical Calculations Zheng, B.; Zhou, Y.; Smugeresky, J. E. Metallurgical and Materials Transactions A, Vol. 39, Issue 9 https://doi.org/10.1007/s11661-008-9557-7	journal	June 2008
Thermal Behavior and Microstructure Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part II. Experimental Investigation and Discussion Zheng, B.; Zhou, Y.; Smugeresky, J. E. Metallurgical and Materials Transactions A, Vol. 39, Issue 9 https://doi.org/10.1007/s11661-008-9566-6	journal	June 2008
Selective Growth of Low Stored Energy Grains During δ Sub-solvus Annealing in the Inconel 718 Nickel-Based Superalloy Agnoli, Andrea; Bernacki, Marc; Logé, Roland Metallurgical and Materials Transactions A, Vol. 46, Issue 9 https://doi.org/10.1007/s11661-015-3035-9	journal	July 2015
Texture Development in High-Silicon Iron Sheet Produced by Simple Shear Deformation Kustas, Andrew B.; Sagapuram, Dinakar; Trumble, Kevin P. Metallurgical and Materials Transactions A, Vol. 47, Issue 6 https://doi.org/10.1007/s11661-016-3437-3	journal	March 2016
Solidification in direct metal deposition by LENS processing Hofmeister, William; Griffith, Michelle JOM, Vol. 53, Issue 9 https://doi.org/10.1007/s11837-001-0066-z	journal	September 2001
Bulk Combinatorial Synthesis and High Throughput Characterization for Rapid Assessment of Magnetic Materials: Application of Laser Engineered Net Shaping (LENS™) Geng, J.; Nlebedim, I. C.; Besser, M. F. JOM, Vol. 68, Issue 7 https://doi.org/10.1007/s11837-016-1918-x	journal	April 2016
Laser Additive Manufacturing of Magnetic Materials Mikler, C. V.; Chaudhary, V.; Borkar, T. JOM, Vol. 69, Issue 3 https://doi.org/10.1007/s11837-017-2257-2	journal	January 2017
Erratum to: Strategy for Texture Management in Metals Additive Manufacturing Kirka, M. M.; Lee, Y.; Greeley, D. A. JOM, Vol. 69, Issue 5 https://doi.org/10.1007/s11837-017-2297-7	journal	March 2017
On the development of the goss texture in iron-3% silicon Mishra, S.; Därmann, C.; Lücke, K. Acta Metallurgica, Vol. 32, Issue 12 https://doi.org/10.1016/0001-6160(84)90161-5	journal	December 1984
Cooling rates in splat cooling Ruhl, Robert C. Materials Science and Engineering, Vol. 1, Issue 6 https://doi.org/10.1016/0025-5416(67)90013-4	journal	March 1967
Steady state columnar and equiaxed growth of dendrites and eutectic Hunt, J. D. Materials Science and Engineering, Vol. 65, Issue 1 https://doi.org/10.1016/0025-5416(84)90201-5	journal	July 1984
Understanding thermal behavior in the LENS process Griffith, M. L.; Schlienger, M. E.; Harwell, L. D. Materials & Design, Vol. 20, Issue 2-3 https://doi.org/10.1016/S0261-3069(99)00016-3	journal	June 1999
Columnar to equiaxed transition in solidification processing Kurz, W.; Bezençon, C.; Gäumann, M. Science and Technology of Advanced Materials, Vol. 2, Issue 1 https://doi.org/10.1016/S1468-6996(01)00047-X	journal	January 2001
Abnormal grain growth in Al–3.5Cu Dennis, J.; Bate, P. S.; Humphreys, F. J. Acta Materialia, Vol. 57, Issue 15 https://doi.org/10.1016/j.actamat.2009.06.018	journal	September 2009
Metallurgy of high-silicon steel parts produced using Selective Laser Melting Garibaldi, Michele; Ashcroft, Ian; Simonelli, Marco Acta Materialia, Vol. 110 https://doi.org/10.1016/j.actamat.2016.03.037	journal	May 2016
Solidification velocity of undercooled Fe–Co alloys Rodriguez, Justin E.; Kreischer, Carolina; Volkmann, Thomas Acta Materialia, Vol. 122 https://doi.org/10.1016/j.actamat.2016.09.047	journal	January 2017
Corrigendum to “Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing” [Acta Mater. 112C (2016) 303–314] Raghavan, Narendran; Babu, Sudarsanam S.; Dehoff, Ryan Acta Materialia, Vol. 140 https://doi.org/10.1016/j.actamat.2017.08.067	journal	November 2017
A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing Roberts, I. A.; Wang, C. J.; Esterlein, R. International Journal of Machine Tools and Manufacture, Vol. 49, Issue 12-13 https://doi.org/10.1016/j.ijmachtools.2009.07.004	journal	October 2009
Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM Lemke, J. N.; Simonelli, M.; Garibaldi, M. Journal of Alloys and Compounds, Vol. 722 https://doi.org/10.1016/j.jallcom.2017.06.085	journal	October 2017
Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel Zhu, X. K.; Chao, Y. J. Journal of Materials Processing Technology, Vol. 146, Issue 2 https://doi.org/10.1016/j.jmatprotec.2003.10.025	journal	February 2004
Effects of welding speed, energy input and heat source distribution on temperature variations in butt joint welding Gery, D.; Long, H.; Maropoulos, P. Journal of Materials Processing Technology, Vol. 167, Issue 2-3 https://doi.org/10.1016/j.jmatprotec.2005.06.018	journal	August 2005
Thermal process maps for predicting solidification microstructure in laser fabrication of thin-wall structures Bontha, Srikanth; Klingbeil, Nathan W.; Kobryn, Pamela A. Journal of Materials Processing Technology, Vol. 178, Issue 1-3 https://doi.org/10.1016/j.jmatprotec.2006.03.155	journal	September 2006
High-throughput stochastic tensile performance of additively manufactured stainless steel Salzbrenner, Bradley C.; Rodelas, Jeffrey M.; Madison, Jonathan D. Journal of Materials Processing Technology, Vol. 241 https://doi.org/10.1016/j.jmatprotec.2016.10.023	journal	March 2017
Studies of magnetic properties of permalloy (Fe–30%Ni) prepared by SLM technology Zhang, Baicheng; Fenineche, Nour-Eddine; Zhu, Lin Journal of Magnetism and Magnetic Materials, Vol. 324, Issue 4 https://doi.org/10.1016/j.jmmm.2011.08.030	journal	February 2012
Grain refinement and grain coarsening of undercooled Fe–Co alloy Liu, Ning; Yang, Gencang; Liu, Feng Materials Characterization, Vol. 57, Issue 2 https://doi.org/10.1016/j.matchar.2005.12.008	journal	August 2006
Laser additive processing of Ni-Fe-V and Ni-Fe-Mo Permalloys: Microstructure and magnetic properties Mikler, C. V.; Chaudhary, V.; Borkar, T. Materials Letters, Vol. 192 https://doi.org/10.1016/j.matlet.2017.01.059	journal	April 2017
Tuning the phase stability and magnetic properties of laser additively processed Fe-30at%Ni soft magnetic alloys Mikler, C. V.; Chaudhary, V.; Soni, V. Materials Letters, Vol. 199 https://doi.org/10.1016/j.matlet.2017.04.054	journal	July 2017
Grain refinement of undercooled single-phase Fe70Co30 alloys Liu, Ning; Liu, Feng; Yang, Gencang Physica B: Condensed Matter, Vol. 387, Issue 1-2 https://doi.org/10.1016/j.physb.2006.03.101	journal	January 2007
Near equiatomic FeCo alloys: Constitution, mechanical and magnetic properties Sourmail, T. Progress in Materials Science, Vol. 50, Issue 7 https://doi.org/10.1016/j.pmatsci.2005.04.001	journal	September 2005
Effect of annealing on the microstructure and magnetic properties of soft magnetic Fe-Si produced via laser additive manufacturing Garibaldi, M.; Ashcroft, I.; Lemke, J. N. Scripta Materialia, Vol. 142 https://doi.org/10.1016/j.scriptamat.2017.08.042	journal	January 2018
Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing Raplee, J.; Plotkowski, A.; Kirka, M. M. Scientific Reports, Vol. 7, Issue 1 https://doi.org/10.1038/srep43554	journal	March 2017
Effect of aging on magnetic properties of Hiperco[sup ®] 27, Hiperco[sup ®] 50, and Hiperco 50 HS[sup ®] alloys Fingers, Richard T.; Carr, Roger P.; Turgut, Zafer Journal of Applied Physics, Vol. 91, Issue 10 https://doi.org/10.1063/1.1453939	journal	January 2002
Single Crystal Anisotropy and Magnetostriction Constants of Several Ferromagnetic Materials Including Alloys of NiFe, SiFe, AlFe, CoNi, and CoFe Hall, R. C. Journal of Applied Physics, Vol. 30, Issue 6 https://doi.org/10.1063/1.1735247	journal	June 1959
The metallurgy and processing science of metal additive manufacturing Sames, W. J.; List, F. A.; Pannala, S. International Materials Reviews, Vol. 61, Issue 5 https://doi.org/10.1080/09506608.2015.1116649	journal	March 2016
Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium Rai, R.; Elmer, J. W.; Palmer, T. A. Journal of Physics D: Applied Physics, Vol. 40, Issue 18 https://doi.org/10.1088/0022-3727/40/18/037	journal	August 2007
Grain size dependence of coercivity and permeability in nanocrystalline ferromagnets Herzer, G. IEEE Transactions on Magnetics, Vol. 26, Issue 5, p. 1397-1402 https://doi.org/10.1109/20.104389	journal	January 1990
High temperature soft magnetic materials: FeCo alloys and composites Yu, R. H.; Basu, S.; Ren, L. IEEE Transactions on Magnetics, Vol. 36, Issue 5 https://doi.org/10.1109/20.908809	journal	January 2000
Process Maps for Predicting Residual Stress and Melt Pool Size in the Laser-Based Fabrication of Thin-Walled Structures Vasinonta, Aditad; Beuth, Jack L.; Griffith, Michelle Journal of Manufacturing Science and Engineering, Vol. 129, Issue 1 https://doi.org/10.1115/1.2335852	journal	March 2006
Metal Additive Manufacturing: A Review of Mechanical Properties Lewandowski, John J.; Seifi, Mohsen Annual Review of Materials Research, Vol. 46, Issue 1 https://doi.org/10.1146/annurev-matsci-070115-032024	journal	July 2016
The Disorder → Order Transformation in Iron–Cobalt-Based Alloys Clegg, D. W.; Buckley, R. A. Metal Science Journal, Vol. 7, Issue 1 https://doi.org/10.1179/030634573790445541	journal	January 1973
Microstructure of Fe–Co–2V and Fe–Co–V–Ni alloys containing 1·8–7·4 wt-%Ni Pitt, C. D.; Rawlings, R. D. Metal Science, Vol. 15, Issue 8 https://doi.org/10.1179/030634581790426912	journal	August 1981
Crystallographic texture engineering through novel melt strategies via electron beam melting: Inconel 718 Dehoff, R. R.; Kirka, M. M.; List, F. A. Materials Science and Technology, Vol. 31, Issue 8 https://doi.org/10.1179/1743284714Y.0000000697	journal	October 2014
Ordering and recrystallization in Fe-50Co-0.4%Cr Buckley, R. A. Metal Science, Vol. 13, Issue 2 https://doi.org/10.1179/msc.1979.13.2.67	journal	February 1979
Ordering transformations in Fe-50Co based alloys Rajkovic, M.; Buckley, R. A. Metal Science, Vol. 15, Issue 1 https://doi.org/10.1179/msc.1981.15.1.21	journal	January 1981
High Strength FeCo–V Intermetallic Alloy: Electrical and Magnetic Properties Sundar, R. S.; Deevi, S. C.; Reddy, B. V. Journal of Materials Research, Vol. 20, Issue 6 https://doi.org/10.1557/JMR.2005.0206	journal	June 2005
Magnetic properties characterization of shear-textured 4 wt% Si electrical steel sheet Kustas, Andrew B.; Chandrasekar, Srinivasan; Trumble, Kevin P. Journal of Materials Research, Vol. 31, Issue 24 https://doi.org/10.1557/jmr.2016.458	journal	December 2016

Cited By (1)

Grain Size Effects in Selective Laser Melted Fe-Co-2V Everhart, Wesley; Newkirk, Joseph Applied Sciences, Vol. 9, Issue 18 https://doi.org/10.3390/app9183701	journal	September 2019

Similar Records

Processing of Fe-Co Soft Ferromagnetic Alloys using Laser Engineered Net Shaping (LENS).

Conference · 2018 · OSTI ID:1503086

Laser Engineered Net Shaping (LENS) of High Entropy Alloys.

Conference · 2018 · OSTI ID:1502686

Laser Engineered Net Shaping (LENS) of High Entropy Alloys.

Conference · 2018 · OSTI ID:1561727

Characterization of Fe-Co soft ferromagnetic alloys processed by laser engineered net shaping (LENS).

Citation Formats

References (48)

Cited By (1)

Similar Records

Related Subjects