Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Stability of polymeric separators in lithium metal batteries in a low voltage environment

Journal Article · · Journal of Materials Chemistry. A
DOI:https://doi.org/10.1039/C7TA11259A· OSTI ID:1502414
 [1];  [2];  [3];  [3];  [4];  [5];  [5]
  1. Energy and Environment Directorate; Pacific Northwest National Laboratory; Richland; USA; School of Materials Science and Engineering
  2. Physical and Computational Sciences Directorate; Pacific Northwest National Laboratory; Richland; USA
  3. Environmental and Molecular Sciences Laboratory; Pacific Northwest National Laboratory; Richland; USA
  4. Energy and Environment Directorate; Pacific Northwest National Laboratory; Richland; USA; School of Energy Research
  5. Energy and Environment Directorate; Pacific Northwest National Laboratory; Richland; USA

Separators can largely affect the coulombic efficiency and cycling stability of lithium metal anode, especially when using the LiPF6electrolyte.

Research Organization:
Pacific Northwest National Laboratory (PNNL), Richland, WA (United States)
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office (EE-3V)
DOE Contract Number:
AC05-76RL01830
OSTI ID:
1502414
Report Number(s):
PNNL-SA-131076; JMCAET
Journal Information:
Journal of Materials Chemistry. A, Vol. 6, Issue 12; ISSN 2050-7488
Publisher:
Royal Society of Chemistry
Country of Publication:
United States
Language:
English

References (41)

Application of Fourier Transform Infrared Spectroscopy (FTIR) for assessing biogenic silica sample purity in geochemical analyses and palaeoenvironmental research journal January 2011
Improving battery safety by early detection of internal shorting with a bifunctional separator journal October 2014
Dendrite-Free Lithium Anode via a Homogenous Li-Ion Distribution Enabled by a Kimwipe Paper journal January 2017
The electrochemical behaviour of 1,3-dioxolane—LiClO4 solutions—I. Uncontaminated solutions journal March 1990
Mussel- and Diatom-Inspired Silica Coating on Separators Yields Improved Power and Safety in Li-Ion Batteries journal August 2012
Stress evolution and capacity fade in constrained lithium-ion pouch cells journal January 2014
Excellent Cycle Life of Lithium-Metal Anodes in Lithium-Ion Batteries with Mussel-Inspired Polydopamine-Coated Separators journal April 2012
Battery Separators journal October 2004
Evaluating the trade-off between mechanical and electrochemical performance of separators for lithium-ion batteries: Methodology and application journal February 2016
Mechanical Properties of a Battery Separator under Compression and Tension journal January 2014
Deformation and fracture behaviors of microporous polymer separators for lithium ion batteries journal January 2014
Effective Suppression of Dendritic Lithium Growth Using an Ultrathin Coating of Nitrogen and Sulfur Codoped Graphene Nanosheets on Polymer Separator for Lithium Metal Batteries journal October 2015
State of health and charge measurements in lithium-ion batteries using mechanical stress journal December 2014
Ceramic but flexible: new ceramic membrane foils for fuel cells and batteries journal September 2002
Ion transport restriction in mechanically strained separator membranes journal March 2013
Li-Anode Protective Layers for Li Rechargeable Batteries via Layer-by-Layer Approaches journal April 2014
FTIR and XPS studies of bioactive silica based glasses journal December 2003
Evaporation-induced, close-packed silica nanoparticle-embedded nonwoven composite separator membranes for high-voltage/high-rate lithium-ion batteries: Advantageous effect of highly percolated, electrolyte-philic microporous architecture journal October 2012
Alkaline composite film as a separator for rechargeable lithium batteries journal August 2003
Accurate Determination of Coulombic Efficiency for Lithium Metal Anodes and Lithium Metal Batteries journal October 2017
A novel intrinsically porous separator for self-standing lithium-ion batteries journal December 2002
Electrochemical performances of lithium-ion cells prepared with polyethylene oxide-coated separators journal October 2001
Coupled effect of strain rate and solvent on dynamic mechanical behaviors of separators in lithium ion batteries journal April 2016
Effects of cell positive cans and separators on the performance of high-voltage Li-ion batteries journal September 2012
Making Li-metal electrodes rechargeable by controlling the dendrite growth direction journal June 2017
Visible light functioning photocatalyst based on Al2O3 doped Mn3O4 nanomaterial for the degradation of organic toxin journal September 2015
In situ FTIR study on the formation and adsorption of CO on alumina-supported noble metal catalysts from H2 and CO2 in the presence of water vapor at high pressures journal January 2012
Characterization of Electrospun PVdF Fiber-Based Polymer Electrolytes journal December 2006
Facile fabrication of nanoporous composite separator membranes for lithium-ion batteries: poly(methyl methacrylate) colloidal particles-embedded nonwoven poly(ethylene terephthalate) journal January 2011
Cellulose-Based Porous Membrane for Suppressing Li Dendrite Formation in Lithium–Sulfur Battery journal August 2016
Suppressing Lithium Dendrite Growth by Metallic Coating on a Separator journal October 2017
Thermomechanical analysis and durability of commercial micro-porous polymer Li-ion battery separators journal March 2011
New parameters for lithium cyclability in organic electrolytes for secondary batteries journal January 1993
Effects of separator breakdown on abuse response of 18650 Li-ion cells journal December 2007
The mechanism of HF formation in LiPF6 based organic carbonate electrolytes journal January 2012
A review on the separators of liquid electrolyte Li-ion batteries journal January 2007
Characteristics of PVdF-HFP/TiO2 composite membrane electrolytes prepared by phase inversion and conventional casting methods journal August 2006
Lithium ion battery separators: Development and performance characterization of a composite membrane journal January 2013
Plasma-assisted water-based Al2O3 ceramic coating for polyethylene-based microporous separators for lithium metal secondary batteries journal September 2016
Stabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement journal November 2016
The study of electrolyte solutions based on solvents from the “glyme” family (linear polyethers) for secondary Li battery systems journal January 1997

Similar Records

Stability of polymeric separators in lithium metal batteries in a low voltage environment
Journal Article · 2018 · Journal of Materials Chemistry. A · OSTI ID:1430415

High Interfacial-Energy Interphase Promoting Safe Lithium Metal Batteries
Journal Article · 2020 · Journal of the American Chemical Society · OSTI ID:1799451

Lithium Difluorophosphate as a Dendrite-Suppressing Additive for Lithium Metal Batteries
Journal Article · 2018 · ACS Applied Materials and Interfaces · OSTI ID:1457041

Related Subjects