skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Multipole error analysis using local 3-bump orbit data in Fermilab Recycler

Abstract

The magnetic harmonic errors of the Fermilab Recycler ring were examined using circulating beam data taken with closed local orbit bumps. Data was first parsed into harmonic orbits of first, second, and third order. Each of which was analyzed for sources of magnetic errors of corresponding order. This study was made possible only with the incredible resolution of a new BPM system that was commissioned after June of 2003.

Authors:
; ;
Publication Date:
Research Org.:
Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)
Sponsoring Org.:
USDOE
OSTI Identifier:
15017068
Report Number(s):
FERMILAB-CONF-05-181-AD
TRN: US200606%%315
DOE Contract Number:
AC02-76CH03000
Resource Type:
Conference
Resource Relation:
Conference: To appear in the proceedings of Particle Accelerator Conference (PAC 05), Knoxville, Tennessee, 16-20 May 2005
Country of Publication:
United States
Language:
English
Subject:
43 PARTICLE ACCELERATORS; ACCELERATORS; FERMILAB; HARMONICS; MULTIPOLES; RESOLUTION; Accelerators

Citation Formats

Yang, M.J., Xiao, M., and /Fermilab. Multipole error analysis using local 3-bump orbit data in Fermilab Recycler. United States: N. p., 2005. Web.
Yang, M.J., Xiao, M., & /Fermilab. Multipole error analysis using local 3-bump orbit data in Fermilab Recycler. United States.
Yang, M.J., Xiao, M., and /Fermilab. Sun . "Multipole error analysis using local 3-bump orbit data in Fermilab Recycler". United States. doi:. https://www.osti.gov/servlets/purl/15017068.
@article{osti_15017068,
title = {Multipole error analysis using local 3-bump orbit data in Fermilab Recycler},
author = {Yang, M.J. and Xiao, M. and /Fermilab},
abstractNote = {The magnetic harmonic errors of the Fermilab Recycler ring were examined using circulating beam data taken with closed local orbit bumps. Data was first parsed into harmonic orbits of first, second, and third order. Each of which was analyzed for sources of magnetic errors of corresponding order. This study was made possible only with the incredible resolution of a new BPM system that was commissioned after June of 2003.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Sun May 01 00:00:00 EDT 2005},
month = {Sun May 01 00:00:00 EDT 2005}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:
  • No abstract prepared.
  • The beam from the Fermilab Linac is injected onto a bump in the closed orbit of the Booster Synchrotron where a carbon foil strips the electrons from the Linac's negative ion hydrogen beam. Although the Booster itself runs at 15 Hz, heat dissipation in the orbit bump magnets has been one limitation to the fraction of the cycles that can be used for beam. New 0.28 T pulsed dipole magnets have been constructed that will fit into the same space as the old ones, run at the full repetition rate of the Booster, and provide a larger bump to allowmore » a cleaner injection orbit. The new magnets use a ferrite in the yoke rather than laminated steel.« less
  • This paper describes a simple analysis procedure that transforms a set of beamline orbit data into a set of harmonic orbits of first, second, and third order or higher. Each harmonic orbit can be studied individually to identify errors of the specific order with minimum interference from other orders. Effectively these are orbits caused by kicks, due to harmonic errors, propagated through linear lattice. Examples from accelerator study will be presented. The application and inherent limitations of this analysis procedure are discussed.
  • A novel method for beam manipulation, compression, and stacking using a broad band RF system in circular accelerators is described. The method uses a series of linear voltage ramps in combination with moving barrier pulses to azimuthally compress, expand, or cog the beam. Beam manipulations can be accomplished rapidly and, in principle, without emittance growth. The general principle of the method is discussed using beam dynamics simulations. Beam experiments in the Fermilab Recycler Ring convincingly validate the concept. Preliminary experiments in the Fermilab Main Injector to investigate its potential for merging two ''booster batches'' to produce high intensity proton beamsmore » for neutrino and antiproton production are described.« less
  • The Fermilab Recycler Ring is a permanent magnet based 8 GeV anti-proton storage ring. A wideband RF system, driven with ARB's (ARBitrary waveform generators), allows the system to produce programmable barrier waveforms. Beam current profile distortion was observed, its origin verified both experimentally and theoretically, and an FPGA-based correction system was designed, tested and implemented to level the bunch profile.