skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Laser Safety Inspection Criteria

Abstract

A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings aremore » subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an opportunity to explain audit items to the laser user and thus the reasons for some of these items. Some examples are given from the audit criteria handout. As an explanatory key to the reader, an Operational Safety Procedure (OSP) as a formally reviewed safety procedure required for all Class 3B and Class 4 laser installations. An ''OSP Binder'' contains all safety documentation related to a given laser operation and serves as a central repository for documents, such as the OSP, interlock logs, lessons learned, contact information etc. ''Unattended Operation'' refers to approved procedures for unattended operation of the laser installation and may include operation beyond normal working hours. ''L-train'' is the LLNL training tracking system.« less

Authors:
Publication Date:
Research Org.:
Lawrence Livermore National Lab., Livermore, CA (US)
Sponsoring Org.:
US Department of Energy (US)
OSTI Identifier:
15011552
Report Number(s):
UCRL-PROC-210017
TRN: US0501325
DOE Contract Number:  
W-7405-ENG-48
Resource Type:
Conference
Resource Relation:
Conference: Presented at: International Laser Safety Conference, Marina Del Rey, CA (US), 03/05/2005--03/10/2005; Other Information: PBD: 11 Feb 2005
Country of Publication:
United States
Language:
English
Subject:
42 ENGINEERING; 70 PLASMA PHYSICS AND FUSION TECHNOLOGY; 99 GENERAL AND MISCELLANEOUS//MATHEMATICS, COMPUTING, AND INFORMATION SCIENCE; AUDITS; COMPLIANCE; DOCUMENTATION; EVALUATION; EYES; INTERLOCKS; LASERS; LAWRENCE LIVERMORE NATIONAL LABORATORY; SAFETY; TRAINING; US NATIONAL IGNITION FACILITY

Citation Formats

Barat, K. Laser Safety Inspection Criteria. United States: N. p., 2005. Web.
Barat, K. Laser Safety Inspection Criteria. United States.
Barat, K. Fri . "Laser Safety Inspection Criteria". United States. https://www.osti.gov/servlets/purl/15011552.
@article{osti_15011552,
title = {Laser Safety Inspection Criteria},
author = {Barat, K},
abstractNote = {A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an opportunity to explain audit items to the laser user and thus the reasons for some of these items. Some examples are given from the audit criteria handout. As an explanatory key to the reader, an Operational Safety Procedure (OSP) as a formally reviewed safety procedure required for all Class 3B and Class 4 laser installations. An ''OSP Binder'' contains all safety documentation related to a given laser operation and serves as a central repository for documents, such as the OSP, interlock logs, lessons learned, contact information etc. ''Unattended Operation'' refers to approved procedures for unattended operation of the laser installation and may include operation beyond normal working hours. ''L-train'' is the LLNL training tracking system.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = {2005},
month = {2}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share: