AGS BOOSTER BEAM POSITION, TUNE, AND LONGITUDINAL PROFILE DATA ACQUISITION SYSTEM.
In this paper we will describe a data acquisition system designed and developed for the AGS Booster. The system was motivated by the need to get high quality beam diagnostics from the AGS Booster. This was accomplished by locating the electronics and digital data acquisition close to the Booster ring, to minimize loss of bandwidth in the original signals. In addition we had to develop the system rapidly and at a low cost. The system consists of a Lecroy digital oscilloscope which is interfaced through a National Instruments LabView{trademark} server application, developed for this project. This allows multiple client applications to time share the scope without interfering with each other. We will present a description of the system design along with example clients that we have implemented.
- Research Organization:
- BROOKHAVEN NATIONAL LABORATORY (US)
- Sponsoring Organization:
- DOE/SC (US)
- DOE Contract Number:
- AC02-98CH10886
- OSTI ID:
- 15006642
- Report Number(s):
- BNL-69571-CP; R&D Project: AD011; KA0501020; TRN: US0400949
- Resource Relation:
- Conference: 2003 PARTICLE ACCELERATOR CONFERENCE, PORTLAND, OR (US), 05/12/2003--05/16/2003; Other Information: PBD: 12 May 2003
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design of the AGS Booster Beam Position Monitor electronics
Development of intelligent instruments with embedded HTTP servers for control and data acquisition in a cryogenic setup—The hardware, firmware, and software implementation