skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: B1 magnet harmonics

Abstract

During the B0 Overpass construction for the CDF detector at Fermilab, 33 B1 magnets were measured using a bucked tangential coil. Measurements were made on the midplane, at the centerline and at {+-} 1 inch horizontal displacement. Since the coil was only 62 inches long, measurements were made at four longitudinal positions. Because of the design of the Main Ring, it was sufficient to combine data from all positions and report the harmonic spectrum for the magnet as a whole. For modeling the Scrounge-atron, it is more useful to treat each measurement position separately. The author reports here an analysis of the harmonic spectra at each probe position, based on the original data.

Authors:
Publication Date:
Research Org.:
Lawrence Livermore National Lab., CA (US)
Sponsoring Org.:
US Department of Energy (US)
OSTI Identifier:
15005727
Report Number(s):
UCRL-ID-139414
TRN: US0305612
DOE Contract Number:  
W-7405-ENG-48
Resource Type:
Technical Report
Resource Relation:
Other Information: PBD: 30 May 2000
Country of Publication:
United States
Language:
English
Subject:
43 PARTICLE ACCELERATORS; CONSTRUCTION; DESIGN; FERMILAB; FERMILAB COLLIDER DETECTOR; HARMONICS; MAGNETS; PROBES; SIMULATION; SPECTRA

Citation Formats

Barnes, P D. B1 magnet harmonics. United States: N. p., 2000. Web. doi:10.2172/15005727.
Barnes, P D. B1 magnet harmonics. United States. doi:10.2172/15005727.
Barnes, P D. Tue . "B1 magnet harmonics". United States. doi:10.2172/15005727. https://www.osti.gov/servlets/purl/15005727.
@article{osti_15005727,
title = {B1 magnet harmonics},
author = {Barnes, P D},
abstractNote = {During the B0 Overpass construction for the CDF detector at Fermilab, 33 B1 magnets were measured using a bucked tangential coil. Measurements were made on the midplane, at the centerline and at {+-} 1 inch horizontal displacement. Since the coil was only 62 inches long, measurements were made at four longitudinal positions. Because of the design of the Main Ring, it was sufficient to combine data from all positions and report the harmonic spectrum for the magnet as a whole. For modeling the Scrounge-atron, it is more useful to treat each measurement position separately. The author reports here an analysis of the harmonic spectra at each probe position, based on the original data.},
doi = {10.2172/15005727},
journal = {},
number = ,
volume = ,
place = {United States},
year = {2000},
month = {5}
}

Technical Report:

Save / Share: