skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Uncertainty analysis of axial temperature and Seebeck coefficient measurements

Abstract

Experimental investigations of solid materials at elevated temperatures rely on the optimized thermal design of the measurement system, as radiation becomes a predominant source of heat loss which can lead to large uncertainty in measured temperature and related physical properties of a test sample. Advancements in surface temperature measurements have reduced thermal losses arising from the cold-finger effect using axially inserted thermocouples and from radiation using shields or other thermal guards. The leading technology for temperature sensing at temperatures up to ~900 °C makes use of these design features for measuring thermopower, yet uncertainty analysis estimation of this technique is not known. This study makes use of finite element modeling to determine spatial temperature distributions to obtain the upper limit of confidence expected for the axially inserted thermocouple approach when a heated radiation shield is incorporated into the design. Using an axially inserted thermocouple to measure the sample surface temperature, the temperature variations across the sample hot and cold surfaces at 900 °C for a temperature drop of 0, 5, and 10 °C are calculated to be as low as 0.02, 0.21, and 0.41 °C, respectively, when a heated radiation shield is employed. Uniform temperature distribution on the thermocouple cross-wiremore » geometry indicates that the axial thermocouple measurement design is indeed effective for suppressing the cold-finger effect. Using a heated radiation shield is found to significantly reduce the temperature gradient across the thermocouples.« less

Authors:
 [1];  [1]; ORCiD logo [2]
  1. Univ. of Connecticut, Storrs, CT (United States). Dept. of Mechanical Engineering
  2. Univ. of Connecticut, Storrs, CT (United States). Dept. of Mechanical Engineering; Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Center for Integrated Nanotechnologies (CINT)
Publication Date:
Research Org.:
Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
Sponsoring Org.:
USDOE Office of Science (SC); National Science Foundation (NSF)
OSTI Identifier:
1485393
Alternate Identifier(s):
OSTI ID: 1466272
Report Number(s):
LA-UR-18-27141
Journal ID: ISSN 0034-6748; LA-UR-18-27141
Grant/Contract Number:  
AC52-06NA25396; CAREER-1553987; PD17-0137
Resource Type:
Journal Article: Accepted Manuscript
Journal Name:
Review of Scientific Instruments
Additional Journal Information:
Journal Volume: 89; Journal Issue: 8; Journal ID: ISSN 0034-6748
Publisher:
American Institute of Physics (AIP)
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; 30 DIRECT ENERGY CONVERSION; materials; transition metals; vacuum apparatus; thermodynamic processes; thermoelectric effects; thermal conductivity

Citation Formats

Yazdani, Sajad, Kim, Hyun-Young, and Pettes, Michael Thompson. Uncertainty analysis of axial temperature and Seebeck coefficient measurements. United States: N. p., 2018. Web. doi:10.1063/1.5023909.
Yazdani, Sajad, Kim, Hyun-Young, & Pettes, Michael Thompson. Uncertainty analysis of axial temperature and Seebeck coefficient measurements. United States. doi:10.1063/1.5023909.
Yazdani, Sajad, Kim, Hyun-Young, and Pettes, Michael Thompson. Mon . "Uncertainty analysis of axial temperature and Seebeck coefficient measurements". United States. doi:10.1063/1.5023909. https://www.osti.gov/servlets/purl/1485393.
@article{osti_1485393,
title = {Uncertainty analysis of axial temperature and Seebeck coefficient measurements},
author = {Yazdani, Sajad and Kim, Hyun-Young and Pettes, Michael Thompson},
abstractNote = {Experimental investigations of solid materials at elevated temperatures rely on the optimized thermal design of the measurement system, as radiation becomes a predominant source of heat loss which can lead to large uncertainty in measured temperature and related physical properties of a test sample. Advancements in surface temperature measurements have reduced thermal losses arising from the cold-finger effect using axially inserted thermocouples and from radiation using shields or other thermal guards. The leading technology for temperature sensing at temperatures up to ~900 °C makes use of these design features for measuring thermopower, yet uncertainty analysis estimation of this technique is not known. This study makes use of finite element modeling to determine spatial temperature distributions to obtain the upper limit of confidence expected for the axially inserted thermocouple approach when a heated radiation shield is incorporated into the design. Using an axially inserted thermocouple to measure the sample surface temperature, the temperature variations across the sample hot and cold surfaces at 900 °C for a temperature drop of 0, 5, and 10 °C are calculated to be as low as 0.02, 0.21, and 0.41 °C, respectively, when a heated radiation shield is employed. Uniform temperature distribution on the thermocouple cross-wire geometry indicates that the axial thermocouple measurement design is indeed effective for suppressing the cold-finger effect. Using a heated radiation shield is found to significantly reduce the temperature gradient across the thermocouples.},
doi = {10.1063/1.5023909},
journal = {Review of Scientific Instruments},
number = 8,
volume = 89,
place = {United States},
year = {Mon Aug 06 00:00:00 EDT 2018},
month = {Mon Aug 06 00:00:00 EDT 2018}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Save / Share:

Works referenced in this record:

High-performance bulk thermoelectrics with all-scale hierarchical architectures
journal, September 2012

  • Biswas, Kanishka; He, Jiaqing; Blum, Ivan D.
  • Nature, Vol. 489, Issue 7416, p. 414-418
  • DOI: 10.1038/nature11439

Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals
journal, April 2014

  • Zhao, Li-Dong; Lo, Shih-Han; Zhang, Yongsheng
  • Nature, Vol. 508, Issue 7496, p. 373-377
  • DOI: 10.1038/nature13184

High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys
journal, May 2008


Phonon softening and crystallographic orientation of strained graphene studied by Raman spectroscopy
journal, April 2009

  • Huang, M.; Yan, H.; Chen, C.
  • Proceedings of the National Academy of Sciences, Vol. 106, Issue 18, p. 7304-7308
  • DOI: 10.1073/pnas.0811754106