skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: UAE6 - Sequence H - Raw Data

Abstract

Sequences H, I, and J: Upwind Baseline (F), Upwind Low Pitch (F), Upwind High Pitch (F) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 25 m/s. Yaw angles of –30 to 180° were achieved at low wind speeds, and angles of ±10° were achieved for high wind speeds. The blade tip pitch was 3° for sequence H, 0° for sequence I, and 6° for sequence J. These three sequences were interleaved during testing because the pitch angle change was easily made by the turbine operator. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to –99999.99 Nm. The teeter link load cell was pretensioned to 40,000 N. In addition to the standard 30-second campaigns, yaw sweeps were done at 7 m/s and 10 m/s. These 6-minute campaigns were collected while the yaw drive rotated the turbine 360° at a rate of 1°/s. The file names for these campaigns use the letter designation, followed by two digits formore » wind speed, followed by YS, followed by 000.« less

Authors:
Publication Date:
Research Org.:
Atmosphere to Electrons (A2e) Data Archive and Portal, Pacific Northwest National Laboratory; PNNL
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Wind and Water Technologies Office (EE-4W)
OSTI Identifier:
1483810
DOE Contract Number:  
67025F
Resource Type:
Data
Data Type:
Specialized Mix
Country of Publication:
United States
Language:
English
Subject:
17 Wind Energy

Citation Formats

Burk, Ken. UAE6 - Sequence H - Raw Data. United States: N. p., 2018. Web. doi:10.21947/1483810.
Burk, Ken. UAE6 - Sequence H - Raw Data. United States. doi:10.21947/1483810.
Burk, Ken. Mon . "UAE6 - Sequence H - Raw Data". United States. doi:10.21947/1483810. https://www.osti.gov/servlets/purl/1483810.
@article{osti_1483810,
title = {UAE6 - Sequence H - Raw Data},
author = {Burk, Ken},
abstractNote = {Sequences H, I, and J: Upwind Baseline (F), Upwind Low Pitch (F), Upwind High Pitch (F) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 25 m/s. Yaw angles of –30 to 180° were achieved at low wind speeds, and angles of ±10° were achieved for high wind speeds. The blade tip pitch was 3° for sequence H, 0° for sequence I, and 6° for sequence J. These three sequences were interleaved during testing because the pitch angle change was easily made by the turbine operator. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to –99999.99 Nm. The teeter link load cell was pretensioned to 40,000 N. In addition to the standard 30-second campaigns, yaw sweeps were done at 7 m/s and 10 m/s. These 6-minute campaigns were collected while the yaw drive rotated the turbine 360° at a rate of 1°/s. The file names for these campaigns use the letter designation, followed by two digits for wind speed, followed by YS, followed by 000.},
doi = {10.21947/1483810},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Mon Dec 03 00:00:00 EST 2018},
month = {Mon Dec 03 00:00:00 EST 2018}
}

Dataset:

Save / Share: