Effect of Laser Shock Peening on the Microstructures and Properties of Oxide-Dispersion-Strengthened Austenitic Steels

Yan, Xueliang; Wang, Fei; Deng, Leimin; Zhang, Chenfei; Lu, Yongfeng; Nastasi, Michael; Kirk, Marquis A.; Li, Meimei; Cui, Bai

doi:10.1002/adem.201700641

Title: Effect of Laser Shock Peening on the Microstructures and Properties of Oxide-Dispersion-Strengthened Austenitic Steels

Journal Article · Tue Nov 07 00:00:00 EST 2017 · Advanced Engineering Materials

DOI:https://doi.org/10.1002/adem.201700641· OSTI ID:1483414

Yan, Xueliang ^[1]; Wang, Fei ^[1]; Deng, Leimin ^[1]; Zhang, Chenfei ^[1]; Lu, Yongfeng ^[1]; Nastasi, Michael ^[1]; Kirk, Marquis A. ^[2]; Li, Meimei ^[2];

^[1]

Univ. of Nebraska-Lincoln, Lincoln, NE (United States)
Argonne National Lab. (ANL), Argonne, IL (United States)

Oxide‐dispersion‐strengthened (ODS) austenitic steels are promising materials for next‐generation fossil and nuclear energy systems. In this study, laser shock peening (LSP) has been applied to ODS 304 austenitic steels, during which a high density of dislocations, stacking faults, and deformation twins are generated in the near surface of the material due to the interaction of laser‐driven shock waves and the austenitic steel matrix. The dispersion particles impede the propagation of dislocations. The compressive residual stress generated by LSP increases with successive LSP scans and decreases along the depth, with a maximum value of −369 MPa. The hardness on the surface can be improved by 12% using LSP. In situ transmission electron microscopy (TEM) irradiation studies reveal that dislocations and incoherent twin boundaries induced by LSP serve as effective sinks to annihilate irradiation defects. These findings suggest that LSP can improve the mechanical properties and irradiation resistance of ODS austenitic steels in nuclear reactor environments.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Argonne National Laboratory (ANL), Argonne, IL (United States)

Sponsoring Organization:: USDOE Office of Nuclear Energy (NE)

Grant/Contract Number:: AC02-06CH11357

OSTI ID:: 1483414

Alternate ID(s):: OSTI ID: 1407842

Journal Information:: Advanced Engineering Materials, Vol. 20, Issue 3; ISSN 1438-1656

Publisher:: WileyCopyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 12 works

Citation information provided by
Web of Science

References (48)

Dislocation dynamics in the oxide dispersion strengthened alloy INCOLOY MA956 Bartsch, M.; Wasilkowska, A.; Czyrska-Filemonowicz, A. Materials Science and Engineering: A, Vol. 272, Issue 1 https://doi.org/10.1016/S0921-5093(99)00471-2	journal	November 1999
Laser shock processing of polycrystalline alumina ceramics Wang, Fei; Zhang, Chenfei; Lu, Yongfeng Journal of the American Ceramic Society, Vol. 100, Issue 3 https://doi.org/10.1111/jace.14630	journal	November 2016
Recent Developments in Irradiation-Resistant Steels Odette, G. R.; Alinger, M. J.; Wirth, B. D. Annual Review of Materials Research, Vol. 38, Issue 1, p. 471-503 https://doi.org/10.1146/annurev.matsci.38.060407.130315	journal	August 2008
Formation of nanoscale complex oxide particles in mechanically alloyed ferritic steel Yamashita *, S.; Ohtsuka, S.; Akasaka, N. Philosophical Magazine Letters, Vol. 84, Issue 8 https://doi.org/10.1080/09500830412331303609	journal	July 2004
The evolution of mechanical property change in irradiated austenitic stainless steels Lucas, G. E. Journal of Nuclear Materials, Vol. 206, Issue 2-3 https://doi.org/10.1016/0022-3115(93)90129-M	journal	November 1993
TEM examination of microstructural evolution during processing of 14CrYWTi nanostructured ferritic alloys Kishimoto, H.; Alinger, M. J.; Odette, G. R. Journal of Nuclear Materials, Vol. 329-333 https://doi.org/10.1016/j.jnucmat.2004.04.044	journal	August 2004
Surface modifications induced in 316L steel by laser peening and shot-peening. Influence on pitting corrosion resistance Peyre, P.; Scherpereel, X.; Berthe, L. Materials Science and Engineering: A, Vol. 280, Issue 2 https://doi.org/10.1016/S0921-5093(99)00698-X	journal	March 2000
Study of defect evolution by TEM with in situ ion irradiation and coordinated modeling Li, Meimei; Kirk, M. A.; Baldo, P. M. Philosophical Magazine, Vol. 92, Issue 16 https://doi.org/10.1080/14786435.2012.662601	journal	June 2012
Microstructure and mechanical behavior of ODS and non-ODS Fe–14Cr model alloys produced by spark plasma sintering Auger, M. A.; de Castro, V.; Leguey, T. Journal of Nuclear Materials, Vol. 436, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.01.331	journal	May 2013
Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel Lu, J. Z.; Luo, K. Y.; Zhang, Y. K. Acta Materialia, Vol. 58, Issue 16 https://doi.org/10.1016/j.actamat.2010.06.010	journal	September 2010
Spark plasma sintering as advanced PM sintering method Mamedov, V. Powder Metallurgy, Vol. 45, Issue 4 https://doi.org/10.1179/003258902225007041	journal	December 2002
Size effects in materials due to microstructural and dimensional constraints: a comparative review Arzt, E. Acta Materialia, Vol. 46, Issue 16 https://doi.org/10.1016/S1359-6454(98)00231-6	journal	October 1998
Effect of laser shock peening on residual stress, microstructure and fatigue behavior of ATI 718Plus alloy Kattoura, Micheal; Mannava, Seetha Ramaiah; Qian, Dong International Journal of Fatigue, Vol. 102 https://doi.org/10.1016/j.ijfatigue.2017.04.016	journal	September 2017
The formation and evolution of oxide particles in oxide-dispersion-strengthened ferritic steels during processing Williams, Ceri A.; Unifantowicz, Paulina; Baluc, Nadine Acta Materialia, Vol. 61, Issue 6 https://doi.org/10.1016/j.actamat.2012.12.042	journal	April 2013
Tensile and creep properties of an oxide dispersion-strengthened ferritic steel Klueh, R. L.; Maziasz, P. J.; Kim, I. S. Journal of Nuclear Materials, Vol. 307-311 https://doi.org/10.1016/S0022-3115(02)01046-2	journal	December 2002
Size-dependent characteristics of ultra-fine oxygen-enriched nanoparticles in austenitic steels Miao, Yinbin; Mo, Kun; Zhou, Zhangjian Journal of Nuclear Materials, Vol. 480 https://doi.org/10.1016/j.jnucmat.2016.08.014	journal	November 2016
On the role of alloy composition and processing parameters in nanocluster formation and dispersion strengthening in nanostuctured ferritic alloys Alinger, M. J.; Odette, G. R.; Hoelzer, D. T. Acta Materialia, Vol. 57, Issue 2 https://doi.org/10.1016/j.actamat.2008.09.025	journal	January 2009
Synchrotron study on load partitioning between ferrite/martensite and nanoparticles of a 9Cr ODS steel Mo, Kun; Zhou, Zhangjian; Miao, Yinbin Journal of Nuclear Materials, Vol. 455, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2014.06.060	journal	December 2014
Three-dimensional Dynamic Finite Element Analysis of Multiple Laser Shock Peening Processes Ding, K. Surface Engineering, Vol. 19, Issue 5 https://doi.org/10.1179/026708403225007563	journal	October 2003
Finite Element Analysis of the Variation in Residual Stress Distribution in Laser Shock Peening of Steels Voothaluru, Rohit; Richard Liu, C.; Cheng, Gary J. Journal of Manufacturing Science and Engineering, Vol. 134, Issue 6 https://doi.org/10.1115/1.4007780	journal	November 2012
Nanoscale characterization and formation mechanism of nanoclusters in an ODS steel elaborated by reactive-inspired ball-milling and annealing Brocq, M.; Radiguet, B.; Poissonnet, S. Journal of Nuclear Materials, Vol. 409, Issue 2 https://doi.org/10.1016/j.jnucmat.2010.09.011	journal	February 2011
Laser shock peening and mechanical shot peening processes applicable for the surface treatment of technical grade ceramics: A review Shukla, Pratik P.; Swanson, Philip T.; Page, Colin J. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 228, Issue 5 https://doi.org/10.1177/0954405413507250	journal	December 2013
Radiation resistance and thermal creep of ODS ferritic steels Sagaradze, V. V.; Shalaev, V. I.; Arbuzov, V. L. Journal of Nuclear Materials, Vol. 295, Issue 2-3 https://doi.org/10.1016/S0022-3115(01)00511-6	journal	June 2001
The effect of shot peening on stress corrosion cracking behaviour of 2205-duplex stainless steel Al-Obaid, Y. F. Engineering Fracture Mechanics, Vol. 51, Issue 1 https://doi.org/10.1016/0013-7944(94)00213-2	journal	May 1995
In-Situ TEM Investigation of Interactions between Irradiation Defects and Crystal Defects in Austenitic Stainless Steels Cui, Bai; Wang, Fei; Lu, Qiaofeng Microscopy and Microanalysis, Vol. 22, Issue S3 https://doi.org/10.1017/S1431927616008217	journal	July 2016
The effects of laser peening and shot peening on fretting fatigue in Ti–6Al–4V coupons Liu, Kevin K.; Hill, Michael R. Tribology International, Vol. 42, Issue 9 https://doi.org/10.1016/j.triboint.2009.04.005	journal	September 2009
Prediction and characterization of residual stresses from laser shock peening Brockman, Robert A.; Braisted, William R.; Olson, Steven E. International Journal of Fatigue, Vol. 36, Issue 1 https://doi.org/10.1016/j.ijfatigue.2011.08.011	journal	March 2012
Effect of thermo-mechanical treatments on the microstructure and mechanical properties of an ODS ferritic steel Oksiuta, Z.; Mueller, P.; Spätig, P. Journal of Nuclear Materials, Vol. 412, Issue 2 https://doi.org/10.1016/j.jnucmat.2011.03.006	journal	May 2011
Influence of laser shock peening on irradiation defects in austenitic stainless steels Lu, Qiaofeng; Su, Qing; Wang, Fei Journal of Nuclear Materials, Vol. 489 https://doi.org/10.1016/j.jnucmat.2017.03.046	journal	June 2017
Mechanical properties of Y2Ti2O7 He, L. F.; Shirahata, J.; Nakayama, T. Scripta Materialia, Vol. 64, Issue 6 https://doi.org/10.1016/j.scriptamat.2010.11.042	journal	March 2011
Laser Peening Process and Its Impact on Materials Properties in Comparison with Shot Peening and Ultrasonic Impact Peening Gujba, Abdullahi; Medraj, Mamoun Materials, Vol. 7, Issue 12 https://doi.org/10.3390/ma7127925	journal	December 2014
A comprehensive investigation on the effects of laser and shot peening on fatigue crack growth in friction stir welded AA 2195 joints Hatamleh, Omar International Journal of Fatigue, Vol. 31, Issue 5 https://doi.org/10.1016/j.ijfatigue.2008.03.029	journal	May 2009
Post-irradiation deformation characteristics of heavy-ion irradiated 304L SS Cole, James I.; Bruemmer, Stephen M. Journal of Nuclear Materials, Vol. 225 https://doi.org/10.1016/0022-3115(94)00672-5	journal	August 1995
Fossil energy applications of intermetallic alloys Judkins, Roddie R.; Rao, Udaya S. Intermetallics, Vol. 8, Issue 9-11 https://doi.org/10.1016/S0966-9795(00)00110-2	journal	September 2000
Stopping of energetic light ions in elemental matter Ziegler, J. F. Journal of Applied Physics, Vol. 85, Issue 3 https://doi.org/10.1063/1.369844	journal	February 1999
Atom probe study of irradiation-enhanced α′ precipitation in neutron-irradiated Fe–Cr model alloys Chen, Wei-Ying; Miao, Yinbin; Wu, Yaqiao Journal of Nuclear Materials, Vol. 462 https://doi.org/10.1016/j.jnucmat.2015.04.005	journal	July 2015
Physics and applications of laser-shock processing Fabbro, R.; Peyre, P.; Berthe, L. Journal of Laser Applications, Vol. 10, Issue 6 https://doi.org/10.2351/1.521861	journal	December 1998
On the use of SRIM for computing radiation damage exposure Stoller, R. E.; Toloczko, M. B.; Was, G. S. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 310 https://doi.org/10.1016/j.nimb.2013.05.008	journal	September 2013
Deformation microstructure of proton-irradiated stainless steels Jiao, Z.; Busby, J. T.; Was, G. S. Journal of Nuclear Materials, Vol. 361, Issue 2-3 https://doi.org/10.1016/j.jnucmat.2006.12.012	journal	April 2007
Morphology of oxide particles in ODS austenitic stainless steel Oka, Hiroshi; Watanabe, Masashi; Hashimoto, Naoyuki Journal of Nuclear Materials, Vol. 442, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.04.073	journal	November 2013
On the microstructure and strengthening mechanism in oxide dispersion-strengthened 316 steel: A coordinated electron microscopy, atom probe tomography and in situ synchrotron tensile investigation Miao, Yinbin; Mo, Kun; Zhou, Zhangjian Materials Science and Engineering: A, Vol. 639 https://doi.org/10.1016/j.msea.2015.05.064	journal	July 2015
Ultrahigh dense and gradient nano-precipitates generated by warm laser shock peening for combination of high strength and ductility Ye, Chang; Liao, Yiliang; Suslov, Sergey Materials Science and Engineering: A, Vol. 609 https://doi.org/10.1016/j.msea.2014.05.003	journal	July 2014
Formation mechanism and the role of nanoparticles in Fe-Cr ODS steels developed for radiation tolerance Hsiung, Luke L.; Fluss, Michael J.; Tumey, Scott J. Physical Review B, Vol. 82, Issue 18 https://doi.org/10.1103/PhysRevB.82.184103	journal	November 2010
Combining in situ transmission electron microscopy irradiation experiments with cluster dynamics modeling to study nanoscale defect agglomeration in structural metals Xu, Donghua; Wirth, Brian D.; Li, Meimei Acta Materialia, Vol. 60, Issue 10 https://doi.org/10.1016/j.actamat.2012.03.055	journal	June 2012
Effect of H and He irradiation on cavity formation and blistering in ceramics Zinkle, S. J. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 286 https://doi.org/10.1016/j.nimb.2012.03.030	journal	September 2012
Dislocation density-based modeling of subsurface grain refinement with laser-induced shock compression Ding, Hongtao; Shin, Yung C. Computational Materials Science, Vol. 53, Issue 1 https://doi.org/10.1016/j.commatsci.2011.08.038	journal	February 2012
Fabrication and characterization of micro dent arrays produced by laser shock peening on titanium Ti–6Al–4V surfaces Guo, Y. B.; Caslaru, R. Journal of Materials Processing Technology, Vol. 211, Issue 4 https://doi.org/10.1016/j.jmatprotec.2010.12.007	journal	April 2011
Laser shock processing and its effects on microstructure and properties of metal alloys: a review Montross, C. International Journal of Fatigue, Vol. 24, Issue 10 https://doi.org/10.1016/S0142-1123(02)00022-1	journal	October 2002

Similar Records

Mechanisms of Mitigating Chloride-Induced Stress Corrosion Cracking of Austenitic Steels by Laser Shock Peening

Journal Article · Sun Apr 03 00:00:00 EDT 2022 · Corrosion · OSTI ID:1483414

Yoo, Yongchul; Yan, Xueliang; Wang, Fei; +3 more

Mechanical Surface Treatments of AISI 304 Stainless Steel: Effects on Surface Microrelief, Residual Stress, and Microstructure

Journal Article · Sun Sep 15 00:00:00 EDT 2019 · Journal of Materials Engineering and Performance · OSTI ID:1483414

Soyama, H.; Mordyuk, B. N.; Dzhemelinskyi, V. V.; +3 more

Novel amorphous SiOC dispersion-strengthened austenitic steels.

Journal Article · Thu May 09 00:00:00 EDT 2019 · Materialia · OSTI ID:1483414

Yan, Xueliang; Wang, Fei; Hattar, Khalid Mikhiel; +2 more

Related Subjects

36 MATERIALS SCIENCE
irradiation resistance
laser shock peening
microstructure
ODS austenitic steels
residual stress

Title: Effect of Laser Shock Peening on the Microstructures and Properties of Oxide-Dispersion-Strengthened Austenitic Steels

Citation Formats

References (48)

Similar Records

Related Subjects