Thermo-mechanical performance assessment of selected plates from MP-1 high power experiments
Monolithic plate-type fuel is a fuel form that is being developed for the conversion of high performance research and test reactors to low-enrichment uranium fuels. These fuel-plates are comprised of a high density, low enrichment, U-Mo alloy based fuel foil encapsulated in an aluminum cladding. To benchmark this new design, number of plates has been irradiated with satisfactory performance. As a part of continuing evaluation efforts, a set of plates covering range of operational parameters is scheduled to be tested during MP-1 irradiation experiments. It is necessary to evaluate the thermo-mechanical performance of plates during irradiation. For this, selected plates with distinct operational histories; covering low power, high power and high fission density were simulated. Fully coupled three-dimensional models of plates with a capability to evolve mechanical and thermal properties of constituent materials with irradiation time and burn-up were developed. The models input used projected parameters, including plate geometry, irradiation history and coolant conditions as input. The model output included temperature, displacement and stresses in the fuel, cladding and diffusion barrier. The fuel behavioral model considered inelastic behavior including volumetric swelling due to solid and gaseous products, irradiation induced creep, thermal expansion, conductivity degradation and plasticity. A visco-plastic behavioral model was used for the cladding that included thermal creep, irradiation hardening, growth due to fast neutrons and Mises plasticity. The plates were then simulated by using projected irradiation parameters. The resulting temperature, displacement and stress-strains were comparatively evaluated on the selected paths. The results were then compared with those of plates from previous RERTR experiments.
- Research Organization:
- Idaho National Lab. (INL), Idaho Falls, ID (United States)
- Sponsoring Organization:
- USDOE National Nuclear Security Administration (NNSA)
- DOE Contract Number:
- AC07-05ID14517
- OSTI ID:
- 1481275
- Report Number(s):
- INL/CON-16-40116-Rev000
- Resource Relation:
- Conference: ASME 2017 Power and Energy Conference, Charlotte, North Carolina, USA, 06/26/2017 - 06/30/2017
- Country of Publication:
- United States
- Language:
- English
Similar Records
THE EFFECTS OF FABRICATION INDUCED RESIDUAL STRESS-STRAIN STATES ON THE IRRADIATION PERFORMANCE OF MONOLITHIC MINI-PLATES
Effects of fuel thickness on thermal and mechanical performance of U10-Mo monolithic fuel plates