skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: The NSLS-II Control Network Design

Abstract

The required positioning tolerances are an essential part of the survey and alignment design. The following tables show the requirement of storage ring. Table 1 provides the required global tolerances, while Table 2 outlines the relative tolerances for the NSLS-II girder-to-girder positioning. These tolerances dictate the instruments and methods necessary to obtain the positioning goals. The global tolerance is a little bit relaxed, but the ± 0.10 mm positioning requirement of adjacent girders is rather strict if the larger dimension and probable foundation settlement is considered.

Authors:
 [1]
  1. Brookhaven National Lab. (BNL), Upton, NY (United States)
Publication Date:
Research Org.:
Brookhaven National Laboratory (BNL), Upton, NY (United States)
Sponsoring Org.:
USDOE Office of Science (SC), Basic Energy Sciences (BES) (SC-22)
OSTI Identifier:
1480951
Report Number(s):
NSLSII-ASD-TN-113; BNL-209404-2018-TECH
DOE Contract Number:  
SC0012704
Resource Type:
Technical Report
Country of Publication:
United States
Language:
English

Citation Formats

Yu, Chenghao. The NSLS-II Control Network Design. United States: N. p., 2018. Web. doi:10.2172/1480951.
Yu, Chenghao. The NSLS-II Control Network Design. United States. doi:10.2172/1480951.
Yu, Chenghao. Tue . "The NSLS-II Control Network Design". United States. doi:10.2172/1480951. https://www.osti.gov/servlets/purl/1480951.
@article{osti_1480951,
title = {The NSLS-II Control Network Design},
author = {Yu, Chenghao},
abstractNote = {The required positioning tolerances are an essential part of the survey and alignment design. The following tables show the requirement of storage ring. Table 1 provides the required global tolerances, while Table 2 outlines the relative tolerances for the NSLS-II girder-to-girder positioning. These tolerances dictate the instruments and methods necessary to obtain the positioning goals. The global tolerance is a little bit relaxed, but the ± 0.10 mm positioning requirement of adjacent girders is rather strict if the larger dimension and probable foundation settlement is considered.},
doi = {10.2172/1480951},
journal = {},
number = ,
volume = ,
place = {United States},
year = {2018},
month = {8}
}