Processing-induced strain glass states in a Ni 49.5 Ti 50.5 shape memory alloy
Shape memory alloys (SMAs) represent a revolutionary and innovative class of active materials which can provide potential solutions to many of today's engineering problems due to their compact form, high energy densities, and multifunctional capabilities. While many applications in the biomedical, aerospace, and automotive industries have already been investigated and realized for Nickel-Titanium (NiTi) based SMAs, the effects of restricting the ferroelastic transformation to nanosized domains is not well understood and the potential remains untapped. In binary NiTi, the martensitic transformation, which is characterized by long-range strain ordering (LRO), can be replaced with a strain glass transition, which consists of an LRO parent phase and a short-range strain ordered glassy phase. Such alloys have been named strain glass alloys (SGAs) due to the fact that they exhibit a glassy state which results from compositionally- or processing-induced strain. While SGAs do not exhibit a stress-free, temperature-induced macroscopic phase change, they still exhibit the strain recovery and actuation capabilities intrinsic to near equiatomic NiTi and other SMAs. It has been shown in the available literature that certain compositions, for example 51.5 at. % Nickel in binary NiTi, can create a strain glass; however, these compositionally-induced NiTi SGAs generally have transformation temperatures below 173 K and this will restrict their practical applications. In the present study, a new method for producing a strain glass phase in Ti-rich NiTi through sufficient plastic deformation via cold work is reported; the resulting SGA exhibits a temperature-induced ferroelastic recovery above room temperature. Additionally, the macroscopic actuation capabilities are improved when compared to both compositionally-induced SGAs and the base material due to the increased functional stresses of the SGA. To better understand the transition from an SMA to an SGA, Ni49.5Ti50.5 (at. %) rods were processed to several degrees of cold work and characterized via scanning and transmission electron microscopy, differential scanning calorimetry, thermomechanical testing, and synchrotron radiation x-ray diffraction. The experimental results indicate that twin size decreases with additional cold work and, around 45% thickness reduction, stress-free thermal cycling no longer results in a measurable phase transformation; however, mechanically-induced phase transformation is still possible, where fully recoverable strains in these SGAs were observed to be above 4.5% when loaded at room temperature and recovered at 150 °C.
- Research Organization:
- Argonne National Lab. (ANL), Argonne, IL (United States). Advanced Photon Source (APS)
- Sponsoring Organization:
- USDOE Office of Science (SC)
- Grant/Contract Number:
- AC02- 06CH11357
- OSTI ID:
- 1476099
- Journal Information:
- Applied Physics Letters, Vol. 113, Issue 13; ISSN 0003-6951
- Publisher:
- American Institute of Physics (AIP)Copyright Statement
- Country of Publication:
- United States
- Language:
- ENGLISH
Web of Science
Similar Records
Damping characteristics of Ti{sub 50}Ni{sub 49.5}Fe{sub 0.5} and Ti{sub 50}Ni{sub 40}Cu{sub 10} ternary shape memory alloys
Influences of granular constraints and surface effects on the heterogeneity of elastic, superelastic, and plastic responses of polycrystalline shape memory alloys