skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Methodology for optimizing composite towers for use on floating wind turbines

Abstract

In this work, a methodology for the design and optimization of a composite wind turbine tower for use on a floating offshore platform is presented. A composite turbine tower on a floating offshore platform not only has the potential to reduce maintenance and upkeep costs associated with the use of steel offshore but also has potential to reduce the tower mass and subsequently the support platform mass. The optimization problem is formulated to obtain a turbine tower that meets all strength and serviceability criteria and minimizes the tower mass. The optimization and design process link a number of dynamic analyses and finite element routines using a genetic algorithm. This work documents the optimization and design software and illustrates its use in various case studies for a 6 MW floating wind turbine system. Case studies include the optimization of a steel tower as a comparison to a composite material tower and the use of a cored, sandwich panel composite tower versus a solid composite tower. The results demonstrate that significant reductions in the tower mass are likely when comparing a steel tower with a composite tower. Also demonstrated for the platform and turbine configuration considered in this work is that themore » minimum mass tower design is driven towards a solid shell composite configuration, rather than a sandwich panel tower shell, in the face of reasonable design constraints.« less

Authors:
 [1]; ORCiD logo [2];  [1];  [1]
  1. University of Maine, Orono, ME (United States). Advanced Structures and Composites Center
  2. University of Maine, Orono, ME (United States). Department of Mechanical Engineering
Publication Date:
Research Org.:
University of Maine, Orono, ME (United States). Department of Mechanical Engineering
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
OSTI Identifier:
1466749
Alternate Identifier(s):
OSTI ID: 1361917
Grant/Contract Number:  
EE0002981; EE0003278
Resource Type:
Journal Article: Accepted Manuscript
Journal Name:
Journal of Renewable and Sustainable Energy
Additional Journal Information:
Journal Volume: 9; Journal Issue: 3; Journal ID: ISSN 1941-7012
Publisher:
American Institute of Physics (AIP)
Country of Publication:
United States
Language:
English
Subject:
42 ENGINEERING; 17 WIND ENERGY

Citation Formats

Young, Andrew C., Goupee, Andrew J., Dagher, Habib J., and Viselli, Anthony M.. Methodology for optimizing composite towers for use on floating wind turbines. United States: N. p., 2017. Web. doi:10.1063/1.4984259.
Young, Andrew C., Goupee, Andrew J., Dagher, Habib J., & Viselli, Anthony M.. Methodology for optimizing composite towers for use on floating wind turbines. United States. doi:10.1063/1.4984259.
Young, Andrew C., Goupee, Andrew J., Dagher, Habib J., and Viselli, Anthony M.. Wed . "Methodology for optimizing composite towers for use on floating wind turbines". United States. doi:10.1063/1.4984259. https://www.osti.gov/servlets/purl/1466749.
@article{osti_1466749,
title = {Methodology for optimizing composite towers for use on floating wind turbines},
author = {Young, Andrew C. and Goupee, Andrew J. and Dagher, Habib J. and Viselli, Anthony M.},
abstractNote = {In this work, a methodology for the design and optimization of a composite wind turbine tower for use on a floating offshore platform is presented. A composite turbine tower on a floating offshore platform not only has the potential to reduce maintenance and upkeep costs associated with the use of steel offshore but also has potential to reduce the tower mass and subsequently the support platform mass. The optimization problem is formulated to obtain a turbine tower that meets all strength and serviceability criteria and minimizes the tower mass. The optimization and design process link a number of dynamic analyses and finite element routines using a genetic algorithm. This work documents the optimization and design software and illustrates its use in various case studies for a 6 MW floating wind turbine system. Case studies include the optimization of a steel tower as a comparison to a composite material tower and the use of a cored, sandwich panel composite tower versus a solid composite tower. The results demonstrate that significant reductions in the tower mass are likely when comparing a steel tower with a composite tower. Also demonstrated for the platform and turbine configuration considered in this work is that the minimum mass tower design is driven towards a solid shell composite configuration, rather than a sandwich panel tower shell, in the face of reasonable design constraints.},
doi = {10.1063/1.4984259},
journal = {Journal of Renewable and Sustainable Energy},
number = 3,
volume = 9,
place = {United States},
year = {Wed May 24 00:00:00 EDT 2017},
month = {Wed May 24 00:00:00 EDT 2017}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Save / Share: