skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: The in-depth residual strain heterogeneities due to an indentation and a laser shock peening for Ti-6Al-4V titanium alloy

Abstract

In this paper, heterogeneity of the through-thickness residual strain due to the laser shock peening (LSP) in comparison with that due to the indentation was studied in Ti-6Al-4V alloy samples. The latter is almost a quasi-static process while the former features extremely high strain-rate deformation. The synchrotron based high-energy X-ray diffraction was employed to investigate the through-thickness residual strain distribution. The studied two samples after the two processing procedures share the following features: (i) the pressure affected depths are both ~2 mm and (ii) the largest magnitudes of the compressive residual strains parallel to the surface are ~4,000 με. However, the pit depth for the indentation sample is ~9 times larger than that for the LSP. The position featuring the largest magnitude of the compressive residual strain is in the sub-surface for the indentation while it is in the surface for the LSP. Results of the elastic-visco-plastic finite element simulation for the indentation indicate that the position featuring the maximum accumulative plastic shear as defined in this paper corresponds to the location with the largest magnitude of compressive residual strain. To validate this finding, full width at half maximum (FWHM) of the X-ray diffraction profile, which is proportional to themore » level of the plastic deformation, is also studied. Finally, it is found that positions with the largest FWHM indeed correspond to the largest magnitude of compressive residual strain for both tests.« less

Authors:
 [1];  [1];  [1];  [2];  [3];  [4];  [1];  [5];  [6]
+ Show Author Affiliations
  1. Univ. of Science and Technology Beijing (USTB) (China). State Key Lab. for Advanced Metals and Materials (SKLAMM)
  2. Beijing Inst. of Technology (China). School of Materials Science and Engineering
  3. RWTH Aachen Univ. (Germany). Steel Inst.
  4. Argonne National Lab. (ANL), Argonne, IL (United States). X-Ray Science Division
  5. Air Force Engineering Univ., Xi'an (China). Science and Technology on Plasma Dynamics Lab.
  6. Beijing Inst. of Aeronautical Materials (China)
Publication Date:
Research Org.:
Argonne National Lab. (ANL), Argonne, IL (United States); Univ. of Science and Technology Beijing (USTB) (China)
Sponsoring Org.:
USDOE; National Natural Science Foundation of China (NNSFC); Fundamental Research Funds for the Central Universities (China); State Key Lab. for Advanced Metals and Materials (China); China Postdoctoral Science Foundation
OSTI Identifier:
1461316
Grant/Contract Number:  
AC02-06CH11357; 51471032; 51231002; 51571025; 06111020; FRF-TP-14-047A1; FRF-TP-15-057A2; 2014Z-01; 2014M560884
Resource Type:
Journal Article: Accepted Manuscript
Journal Name:
Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing
Additional Journal Information:
Journal Volume: 714; Journal ID: ISSN 0921-5093
Publisher:
Elsevier
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; laser shock peening; indentation; Ti-6Al-4V; residual strains; elastic-visco-plastic finite element model

Citation Formats

Xie, Q., Li, R., Wang, Y. D., Su, R., Lian, J., Ren, Y., Zheng, W., Zhou, X., and Wang, Y. The in-depth residual strain heterogeneities due to an indentation and a laser shock peening for Ti-6Al-4V titanium alloy. United States: N. p., 2017. Web. doi:10.1016/j.msea.2017.12.073.
Copy to clipboard
Xie, Q., Li, R., Wang, Y. D., Su, R., Lian, J., Ren, Y., Zheng, W., Zhou, X., & Wang, Y. The in-depth residual strain heterogeneities due to an indentation and a laser shock peening for Ti-6Al-4V titanium alloy. United States. https://doi.org/10.1016/j.msea.2017.12.073
Copy to clipboard
Xie, Q., Li, R., Wang, Y. D., Su, R., Lian, J., Ren, Y., Zheng, W., Zhou, X., and Wang, Y. Tue . "The in-depth residual strain heterogeneities due to an indentation and a laser shock peening for Ti-6Al-4V titanium alloy". United States. https://doi.org/10.1016/j.msea.2017.12.073. https://www.osti.gov/servlets/purl/1461316.
Copy to clipboard
@article{osti_1461316,
title = {The in-depth residual strain heterogeneities due to an indentation and a laser shock peening for Ti-6Al-4V titanium alloy},
author = {Xie, Q. and Li, R. and Wang, Y. D. and Su, R. and Lian, J. and Ren, Y. and Zheng, W. and Zhou, X. and Wang, Y.},
abstractNote = {In this paper, heterogeneity of the through-thickness residual strain due to the laser shock peening (LSP) in comparison with that due to the indentation was studied in Ti-6Al-4V alloy samples. The latter is almost a quasi-static process while the former features extremely high strain-rate deformation. The synchrotron based high-energy X-ray diffraction was employed to investigate the through-thickness residual strain distribution. The studied two samples after the two processing procedures share the following features: (i) the pressure affected depths are both ~2 mm and (ii) the largest magnitudes of the compressive residual strains parallel to the surface are ~4,000 με. However, the pit depth for the indentation sample is ~9 times larger than that for the LSP. The position featuring the largest magnitude of the compressive residual strain is in the sub-surface for the indentation while it is in the surface for the LSP. Results of the elastic-visco-plastic finite element simulation for the indentation indicate that the position featuring the maximum accumulative plastic shear as defined in this paper corresponds to the location with the largest magnitude of compressive residual strain. To validate this finding, full width at half maximum (FWHM) of the X-ray diffraction profile, which is proportional to the level of the plastic deformation, is also studied. Finally, it is found that positions with the largest FWHM indeed correspond to the largest magnitude of compressive residual strain for both tests.},
doi = {10.1016/j.msea.2017.12.073},
url = {https://www.osti.gov/biblio/1461316}, journal = {Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing},
issn = {0921-5093},
number = ,
volume = 714,
place = {United States},
year = {2017},
month = {12}
}
Copy to clipboard
Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record
https://doi.org/10.1016/j.msea.2017.12.073
Copyright Statement
Other availability
Search WorldCat Search WorldCat to find libraries that may hold this journal
Citation Metrics:
Cited by: 7 works
Citation information provided by
Web of Science

Figures / Tables:

Table 1 Table 1: The average residual lattice strain [με] for differently oriented grains at different depths after the indentation.
All figures and tables (10 total)
Save / Share:
Export Metadata
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.

Works referencing / citing this record:

Crystal plasticity modelling of flow behavior under various strain rates
conference, January 2019

  • Lian, Junhe; Liu, Wenqi; Zhang, Wenwen
  • PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, AIP Conference Proceedings
  • https://doi.org/10.1063/1.5112753

The lattice strain ratio in characterizing the grain-to-grain interaction effect and its specific insight on the plastic deformation of polycrystalline materials
journal, April 2018

    [ × clear filter / sort ]

    Figures / Tables found in this record:

    Table 1(p. 11)table
    Table 2(p. 11)table
    Fig. 1(p. 12)figure
    Fig. 2(p. 13)figure
    Fig. 3(p. 13)figure
    Fig. 4(p. 14)figure
    Fig. 5(p. 14)figure
    Fig. 6(p. 15)figure
    Fig. 7(p. 15)figure
    Fig. 8(p. 16)figure
      [ × clear filter / sort ]
      Figures/Tables have been extracted from DOE-funded journal article accepted manuscripts.

      Similar records in OSTI.GOV collections: