skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: BAAM Additive Manufacturing of Magnetically Levitated Wind Turbine

Abstract

ORNL worked with Hover Energy LLC (Hover) on the design of Big Area Additive Manufacturing (BAAM) extrusion components. The objective of this technical collaboration was to identify and evaluate fabrication of components using alternative additive manufacturing techniques. Multiple candidate parts were identified. A design modification to fabricate diverters using additive manufacturing (AM) was performed and the part was analyzed based on anticipated wind loading. Scaled versions of two parts were printed using the BAAM for wind tunnel testing.

Authors:
 [1];  [1];  [1]
  1. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Publication Date:
Research Org.:
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Sponsoring Org.:
USDOE
OSTI Identifier:
1439341
Report Number(s):
ORNL/TM-2018/793
CRADA NFE-17-06605
DOE Contract Number:
AC05-00OR22725
Resource Type:
Technical Report
Country of Publication:
United States
Language:
English
Subject:
17 WIND ENERGY

Citation Formats

Richardson, Bradley S., Noakes, Mark W., and Roschli, Alex C.. BAAM Additive Manufacturing of Magnetically Levitated Wind Turbine. United States: N. p., 2018. Web. doi:10.2172/1439341.
Richardson, Bradley S., Noakes, Mark W., & Roschli, Alex C.. BAAM Additive Manufacturing of Magnetically Levitated Wind Turbine. United States. doi:10.2172/1439341.
Richardson, Bradley S., Noakes, Mark W., and Roschli, Alex C.. Tue . "BAAM Additive Manufacturing of Magnetically Levitated Wind Turbine". United States. doi:10.2172/1439341. https://www.osti.gov/servlets/purl/1439341.
@article{osti_1439341,
title = {BAAM Additive Manufacturing of Magnetically Levitated Wind Turbine},
author = {Richardson, Bradley S. and Noakes, Mark W. and Roschli, Alex C.},
abstractNote = {ORNL worked with Hover Energy LLC (Hover) on the design of Big Area Additive Manufacturing (BAAM) extrusion components. The objective of this technical collaboration was to identify and evaluate fabrication of components using alternative additive manufacturing techniques. Multiple candidate parts were identified. A design modification to fabricate diverters using additive manufacturing (AM) was performed and the part was analyzed based on anticipated wind loading. Scaled versions of two parts were printed using the BAAM for wind tunnel testing.},
doi = {10.2172/1439341},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Tue May 01 00:00:00 EDT 2018},
month = {Tue May 01 00:00:00 EDT 2018}
}

Technical Report:

Save / Share: