skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Advanced EMT and Phasor-Domain Hybrid Simulation with Simulation Mode Switching Capability for Transmission and Distribution Systems

Abstract

Conventional electromagnetic transient (EMT) and phasor-domain hybrid simulation approaches presently exist for trans-mission system level studies. Their simulation efficiency is generally constrained by the EMT simulation. With an increasing number of distributed energy resources and non-conventional loads being installed in distribution systems, it is imperative to extend the hybrid simulation application to include distribution systems and integrated transmission and distribution systems. Meanwhile, it is equally important to improve the simulation efficiency as the modeling scope and complexity of the detailed system in the EMT simulation increases. To meet both requirements, this paper introduces an advanced EMT and phasor-domain hybrid simulation approach. This approach has two main features: 1) a comprehensive phasor-domain modeling framework which supports positive-sequence, three-sequence, three-phase and mixed three-sequence/three-phase representations and 2) a robust and flexible simulation mode switching scheme. The developed scheme enables simulation switching from hybrid simulation mode back to pure phasor-domain dynamic simulation mode to achieve significantly improved simulation efficiency. The proposed method has been tested on integrated transmission and distribution systems. In conclusion, the results show that with the developed simulation switching feature, the total computational time is significantly reduced compared to running the hybrid simulation for the whole simulation period, while maintaining goodmore » simulation accuracy.« less

Authors:
 [1];  [2]
  1. Pacific Northwest National Lab. (PNNL), Richland, WA (United States). Electricity Infrastructure Group
  2. Arizona State Univ., Tempe, AZ (United States). Dept. of Electrical, Computer and Energy Engineering
Publication Date:
Research Org.:
Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
Sponsoring Org.:
USDOE; National Science Foundation (NSF)
OSTI Identifier:
1438246
Report Number(s):
PNNL-SA-126907
Journal ID: ISSN 0885-8950
Grant/Contract Number:  
EEC-9908690; AC05-76RL01830
Resource Type:
Journal Article: Accepted Manuscript
Journal Name:
IEEE Transactions on Power Systems
Additional Journal Information:
Journal Volume: 33; Journal Issue: 6; Journal ID: ISSN 0885-8950
Publisher:
IEEE
Country of Publication:
United States
Language:
English
Subject:
24 POWER TRANSMISSION AND DISTRIBUTION; Switches; Power system dynamics; Load modeling; Computational modeling; Power system stability; Adaptation models; Simulation

Citation Formats

Huang, Qiuhua, and Vittal, Vijay. Advanced EMT and Phasor-Domain Hybrid Simulation with Simulation Mode Switching Capability for Transmission and Distribution Systems. United States: N. p., 2018. Web. doi:10.1109/TPWRS.2018.2834561.
Huang, Qiuhua, & Vittal, Vijay. Advanced EMT and Phasor-Domain Hybrid Simulation with Simulation Mode Switching Capability for Transmission and Distribution Systems. United States. https://doi.org/10.1109/TPWRS.2018.2834561
Huang, Qiuhua, and Vittal, Vijay. 2018. "Advanced EMT and Phasor-Domain Hybrid Simulation with Simulation Mode Switching Capability for Transmission and Distribution Systems". United States. https://doi.org/10.1109/TPWRS.2018.2834561. https://www.osti.gov/servlets/purl/1438246.
@article{osti_1438246,
title = {Advanced EMT and Phasor-Domain Hybrid Simulation with Simulation Mode Switching Capability for Transmission and Distribution Systems},
author = {Huang, Qiuhua and Vittal, Vijay},
abstractNote = {Conventional electromagnetic transient (EMT) and phasor-domain hybrid simulation approaches presently exist for trans-mission system level studies. Their simulation efficiency is generally constrained by the EMT simulation. With an increasing number of distributed energy resources and non-conventional loads being installed in distribution systems, it is imperative to extend the hybrid simulation application to include distribution systems and integrated transmission and distribution systems. Meanwhile, it is equally important to improve the simulation efficiency as the modeling scope and complexity of the detailed system in the EMT simulation increases. To meet both requirements, this paper introduces an advanced EMT and phasor-domain hybrid simulation approach. This approach has two main features: 1) a comprehensive phasor-domain modeling framework which supports positive-sequence, three-sequence, three-phase and mixed three-sequence/three-phase representations and 2) a robust and flexible simulation mode switching scheme. The developed scheme enables simulation switching from hybrid simulation mode back to pure phasor-domain dynamic simulation mode to achieve significantly improved simulation efficiency. The proposed method has been tested on integrated transmission and distribution systems. In conclusion, the results show that with the developed simulation switching feature, the total computational time is significantly reduced compared to running the hybrid simulation for the whole simulation period, while maintaining good simulation accuracy.},
doi = {10.1109/TPWRS.2018.2834561},
url = {https://www.osti.gov/biblio/1438246}, journal = {IEEE Transactions on Power Systems},
issn = {0885-8950},
number = 6,
volume = 33,
place = {United States},
year = {Wed May 09 00:00:00 EDT 2018},
month = {Wed May 09 00:00:00 EDT 2018}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Citation Metrics:
Cited by: 26 works
Citation information provided by
Web of Science

Figures / Tables:

Fig. 1 Fig. 1: A schematic illustrating conventional 2-stage hybrid simulation

Save / Share: