skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Country Susceptibility Modeling.

Abstract

Abstract not provided.

Authors:
;
Publication Date:
Research Org.:
Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
Sponsoring Org.:
Internal Sandia
OSTI Identifier:
1431800
Report Number(s):
SAND2017-7098C
655081
DOE Contract Number:
AC04-94AL85000
Resource Type:
Conference
Resource Relation:
Conference: Proposed for presentation at the Student Symposium At Sandia National Laboratories held July 26, 2017 in Albuquerque, NM.
Country of Publication:
United States
Language:
English

Citation Formats

Adams, Ryan, and Steiert, Douglas Jeffrey. Country Susceptibility Modeling.. United States: N. p., 2017. Web.
Adams, Ryan, & Steiert, Douglas Jeffrey. Country Susceptibility Modeling.. United States.
Adams, Ryan, and Steiert, Douglas Jeffrey. Sat . "Country Susceptibility Modeling.". United States. doi:. https://www.osti.gov/servlets/purl/1431800.
@article{osti_1431800,
title = {Country Susceptibility Modeling.},
author = {Adams, Ryan and Steiert, Douglas Jeffrey},
abstractNote = {Abstract not provided.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Sat Jul 01 00:00:00 EDT 2017},
month = {Sat Jul 01 00:00:00 EDT 2017}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:
  • Abstract not provided.
  • The influences of microstructural factors, such as a distribution of precipitates and an internal strain after tempering, on SSC susceptibilities are investigated. It is revealed that a homogenous dispersion of spheroidized fine carbides and a reduction of locally concentrated internal strains in the course of recovery and recrystallization are preferable to improve the SSC resistance of low alloyed steel. Microstructure refinement is effective in increasing Luders elongations and permits larger allowance of plastic deformations to initiate SSC. With regard to the limitation of maximum hardness or strength for sour service, an existence of the critical strain to SSC is discussed.more » Utilizing the technique of microstructure control, C-100 grade OCTG are developed. SSC susceptibilities of trial products are examined using various kinds of SSC evaluation methods. Characteristics and comparisons of testing methods are also discussed.« less
  • Atomic force microscopy (AFM) and electromagnetic field modeling were used to study the influence of nodular coating defects on laser-induced damage of multilayer dielectric coatings. In studies of HfO[sub 2]/SiO[sub 2] mirrors with 1.06 [mu]m illumination, AFM results showed that nodular defects with high dome heights ([gt]0.6 [mu]m) were most susceptible to laser damage. Crater defects, formed by nodules ejected from the coating prior to illumination, were not damaged when illuminated over the same range of fluences. A finite-difference time-domain electromagnetic modeling code was used to study the influence of 3-D nodule defects on the E-field distribution within the interferencemore » coating. The modeling results show that E-field enhancements as large as a factor of 4 can be present at the defects. Crater defects, however, result in minimal enhancement of the E-fields within the coating. These modeling results are consistent with the AFM experimental data, indicating that E-field enhancement is a contributing mechanism in defect-dominated laser damage of optical coatings.« less
  • Atomic force microscopy (AFM) and electromagnetic field modeling were used to study the influence of nodular coating defects on laser-induced damage of multilayer dielectric coatings. In studies of HfO[sub 2]/SiO[sub 2] mirrors with 1.06 [mu]m illumination, AFM results showed that nodular defects with high dome heights (>0.6 [mu]m) were most susceptible to laser damage. Crater defects, formed by nodules ejected from the coating prior to illumination, were not damaged when illuminated over the same range of fluences. A finite-difference time-domain electromagnetic modeling code was used to study the influence of 3-D nodule defects on the E-field distribution within the interferencemore » coating. The modeling results show that Enfield enhancements as large as a factor of 4 can be present at the defects. Crater defects, however, result in minimal enhancement of the E-fields within the coating. These modeling results are consistent with the AFM experimental data, indicating that E-field enhancement is a contributing mechanism in defect-dominated laser damage of optical coatings.« less
  • Atomic force microscopy (AFM) and electromagnetic field modeling were used to study the influence of nodular coating defects on laser-induced damage of multilayer dielectric coatings. In studies of HfO{sub 2}/SiO{sub 2} mirrors with 1.06 {mu}m illumination, AFM results showed that nodular defects with high dome heights (>0.6 {mu}m) were most susceptible to laser damage. Crater defects, formed by nodules ejected from the coating prior to illumination, were not damaged when illuminated over the same range of fluences. A finite-difference time-domain electromagnetic modeling code was used to study the influence of 3-D nodule defects on the E-field distribution within the interferencemore » coating. The modeling results show that Enfield enhancements as large as a factor of 4 can be present at the defects. Crater defects, however, result in minimal enhancement of the E-fields within the coating. These modeling results are consistent with the AFM experimental data, indicating that E-field enhancement is a contributing mechanism in defect-dominated laser damage of optical coatings.« less