skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel

Abstract

The experimentally measured grain-orientation-dependent residual lattice strains, evolved in an interstitia-free steel after 70% cold rolling reduction, are studied by means of crystal elastic visco-plastic finite element simulations, which provides a very satisfactory prediction of deformation texture. The calculated residual lattice strain pole figure matches well with the experimentally measured counterpart within the highest density regions of major texture components observed. Both experimental evidence and results of modeling clearly indicate that the residual lattice strain is orientation dependent, based on comprehensive information on the evolution of residual lattice strain in various crystallographic orientations during plastic deformation. It appears that in a cold rolled material, there is a general correlation between the stresses developed just prior to unloading and the residual lattice strains in particular directions. Here, it is also shown that the cumulative plastic shear does not reveal a clear correlation with the components of residual lattice strain while presented in the normal correlation plot, however, this relationship can be better understood by means of the orientation distribution function of residual lattice strain, which can be derived from the neutron or X-ray diffraction experiments.

Authors:
ORCiD logo [1]; ORCiD logo [2];  [3];  [4];  [5];  [6];  [7]; ORCiD logo [1]
  1. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Chemical and Engineering Materials Division
  2. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Computational Sciences and Engineering Division
  3. Eotvos Lorand Univ., Budapest (Hungary). Savaria Inst. of Technology
  4. Tata Steel, IJmuiden Technology Centre, IJmuiden (The Netherlands)
  5. Univ of Science and Technology, Beijing (China). State Key Lab. for Advanced Metals and Materials (SKLAMM)
  6. RWTH Aachen Univ. (Germany). Steel Inst.
  7. Jiangsu Univ. of Science and Technology, Jiangsu (China). School of Electronics and Information
Publication Date:
Research Org.:
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Sponsoring Org.:
USDOE Laboratory Directed Research and Development (LDRD) Program; National Natural Science Foundation of China (NNSFC)
OSTI Identifier:
1430621
Grant/Contract Number:  
AC05-00OR22725; 51471032; 51231002; 06111020; 51571025
Resource Type:
Journal Article: Accepted Manuscript
Journal Name:
Steel Research International
Additional Journal Information:
Journal Volume: 89; Journal Issue: 3; Journal ID: ISSN 1611-3683
Publisher:
Wiley
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; Grain orientation; IF steel; Lattice strain; Residual lattice strain; Rolling

Citation Formats

Xie, Qingge, Gorti, Sarma B., Sidor, Jurij, An, Yuguo, Wang, Yandong, Lian, Junhe, Lan, Haoyu, and An, Ke. Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel. United States: N. p., 2018. Web. doi:10.1002/srin.201700408.
Xie, Qingge, Gorti, Sarma B., Sidor, Jurij, An, Yuguo, Wang, Yandong, Lian, Junhe, Lan, Haoyu, & An, Ke. Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel. United States. doi:10.1002/srin.201700408.
Xie, Qingge, Gorti, Sarma B., Sidor, Jurij, An, Yuguo, Wang, Yandong, Lian, Junhe, Lan, Haoyu, and An, Ke. Wed . "Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel". United States. doi:10.1002/srin.201700408. https://www.osti.gov/servlets/purl/1430621.
@article{osti_1430621,
title = {Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel},
author = {Xie, Qingge and Gorti, Sarma B. and Sidor, Jurij and An, Yuguo and Wang, Yandong and Lian, Junhe and Lan, Haoyu and An, Ke},
abstractNote = {The experimentally measured grain-orientation-dependent residual lattice strains, evolved in an interstitia-free steel after 70% cold rolling reduction, are studied by means of crystal elastic visco-plastic finite element simulations, which provides a very satisfactory prediction of deformation texture. The calculated residual lattice strain pole figure matches well with the experimentally measured counterpart within the highest density regions of major texture components observed. Both experimental evidence and results of modeling clearly indicate that the residual lattice strain is orientation dependent, based on comprehensive information on the evolution of residual lattice strain in various crystallographic orientations during plastic deformation. It appears that in a cold rolled material, there is a general correlation between the stresses developed just prior to unloading and the residual lattice strains in particular directions. Here, it is also shown that the cumulative plastic shear does not reveal a clear correlation with the components of residual lattice strain while presented in the normal correlation plot, however, this relationship can be better understood by means of the orientation distribution function of residual lattice strain, which can be derived from the neutron or X-ray diffraction experiments.},
doi = {10.1002/srin.201700408},
journal = {Steel Research International},
issn = {1611-3683},
number = 3,
volume = 89,
place = {United States},
year = {2018},
month = {1}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Citation Metrics:
Cited by: 4 works
Citation information provided by
Web of Science

Figures / Tables:

Fig.1 Fig.1: Experimentally measured and modelled mechanical response of hot rolled IF steel sheet during the tensile test.

Save / Share:

Works referenced in this record:

The shear fracture of dual-phase steel
journal, October 2011


Modeling texture change during the static recrystallization of interstitial free steels
journal, January 1996

  • Kestens, L.; Jonas, J. J.
  • Metallurgical and Materials Transactions A, Vol. 27, Issue 1
  • DOI: 10.1007/BF02647756

Evolution of recrystallization texture in nonoriented electrical steels
journal, June 2003


Deformation texture prediction: from the Taylor model to the advanced Lamel model
journal, March 2005


Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons
journal, October 2006

  • Delannay, Laurent; Jacques, Pascal J.; Kalidindi, Surya R.
  • International Journal of Plasticity, Vol. 22, Issue 10
  • DOI: 10.1016/j.ijplas.2006.01.008

Anelasticity in austenitic stainless steel
journal, November 2012


A new cluster-type model for the simulation of textures of polycrystalline metals
journal, May 2014


Integration algorithm for modeling the elasto-viscoplastic response of polycrystalline materials
journal, April 1999


Deep drawing textures in low carbon steels
journal, September 1999


Stress-Orientation Distribution Function (SODF) - Description, Symmetry and Determination
journal, May 2000


Evaluation of crystallographic changes and plastic strain ratio in Al alloys
journal, June 2016


Modeling the effect of microstructural features on the nucleation of creep cavities
journal, October 2008


Grain orientation dependence of lattice strains and intergranular damage rates in polycrystals under cyclic loading
journal, March 2013


Grain-orientation-dependent residual stress and the effect of annealing in cold-rolled stainless steel
journal, April 2002


N-site modeling of a 3D viscoplastic polycrystal using Fast Fourier Transform
journal, August 2001


Texture Analysis with MTEX – Free and Open Source Software Toolbox
journal, February 2010


The evolution of recrystallization textures in body centred cubic metals
journal, June 1998


Through process texture evolution and magnetic properties of high Si non-oriented electrical steels
journal, September 2012


Influence of shot peening and laser ablation on residual stress state and phase composition of cemented carbide cutting inserts
journal, January 2013

  • Denkena, Berend; Breidenstein, Bernd; Wagner, Lothar
  • International Journal of Refractory Metals and Hard Materials, Vol. 36
  • DOI: 10.1016/j.ijrmhm.2012.07.005

Determination of the stress orientation distribution function using pulsed neutron sources
journal, January 2003

  • Wang, Y. D.; Wang, X. -L.; Stoica, A. D.
  • Journal of Applied Crystallography, Vol. 36, Issue 1
  • DOI: 10.1107/S0021889802017399

Evolution of recrystallization textures in particle containing Al alloys after various rolling reductions: Experimental study and modeling
journal, March 2015


    Works referencing / citing this record:

    Numerical Study of the Effect of Inclusions on the Residual Stress Distribution in High-Strength Martensitic Steels During Cooling
    journal, January 2019

    • Gu, Chao; Lian, Junhe; Bao, Yanping
    • Applied Sciences, Vol. 9, Issue 3
    • DOI: 10.3390/app9030455