skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Replica molding-based nanopatterning of tribocharge on elastomer with application to electrohydrodynamic nanolithography

Abstract

Replica molding often induces tribocharge on elastomers. To date, this phenomenon has been studied only on untextured elastomer surfaces even though replica molding is an effective method for their nanotexturing. Here we show that on elastomer surfaces nanotextured through replica molding the induced tribocharge also becomes patterned at nanoscale in close correlation with the nanotexture. Here, by applying Kelvin probe microscopy, electrohydrodynamic lithography, and electrostatic analysis to our model nanostructure, poly(dimethylsiloxane) nanocup arrays replicated from a polycarbonate nanocone array, we reveal that the induced tribocharge is highly localized within the nanocup, especially around its rim. Through finite element analysis, we also find that the rim sustains the strongest friction during the demolding process. From these findings, we identify the demolding-induced friction as the main factor governing the tribocharge’s nanoscale distribution pattern. Finally, by incorporating the resulting annular tribocharge into electrohydrodynamic lithography, we also accomplish facile realization of nanovolcanos with 10 nm-scale craters.

Authors:
ORCiD logo [1]; ORCiD logo [2];  [3];  [4]; ORCiD logo [5]
  1. Iowa State Univ., Ames, IA (United States). Dept. of Electrical and Computer Engineering
  2. Iowa State Univ., Ames, IA (United States). Dept. of Electrical and Computer Engineering; Ames Lab. and Iowa State Univ., Ames, IA (United States)
  3. Iowa State Univ., Ames, IA (United States). Dept. of of Civil, Construction and Environmental Engineering
  4. Iowa State Univ., Ames, IA (United States). Dept. of Electrical and Computer Engineering, and Dept. of Physics and Astronomy; Ames Lab. and Iowa State Univ., Ames, IA (United States)
  5. Iowa State Univ., Ames, IA (United States). Dept. of Electrical and Computer Engineering, and Dept. of Physics and Astronomy
Publication Date:
Research Org.:
Ames Laboratory (AMES), Ames, IA (United States)
Sponsoring Org.:
USDOE Office of Science (SC), Basic Energy Sciences (BES) (SC-22)
OSTI Identifier:
1425475
Report Number(s):
IS-J-9583
Journal ID: ISSN 2041-1723; PII: 3319
Grant/Contract Number:
AC02-07CH11358; CMMI-1265844
Resource Type:
Journal Article: Accepted Manuscript
Journal Name:
Nature Communications
Additional Journal Information:
Journal Volume: 9; Journal Issue: 1; Journal ID: ISSN 2041-1723
Publisher:
Nature Publishing Group
Country of Publication:
United States
Language:
English
Subject:
77 NANOSCIENCE AND NANOTECHNOLOGY; Polymers; Surface patterning

Citation Formats

Li, Qiang, Peer, Akshit, Cho, In Ho, Biswas, Rana, and Kim, Jaeyoun. Replica molding-based nanopatterning of tribocharge on elastomer with application to electrohydrodynamic nanolithography. United States: N. p., 2018. Web. doi:10.1038/s41467-018-03319-4.
Li, Qiang, Peer, Akshit, Cho, In Ho, Biswas, Rana, & Kim, Jaeyoun. Replica molding-based nanopatterning of tribocharge on elastomer with application to electrohydrodynamic nanolithography. United States. doi:10.1038/s41467-018-03319-4.
Li, Qiang, Peer, Akshit, Cho, In Ho, Biswas, Rana, and Kim, Jaeyoun. Fri . "Replica molding-based nanopatterning of tribocharge on elastomer with application to electrohydrodynamic nanolithography". United States. doi:10.1038/s41467-018-03319-4. https://www.osti.gov/servlets/purl/1425475.
@article{osti_1425475,
title = {Replica molding-based nanopatterning of tribocharge on elastomer with application to electrohydrodynamic nanolithography},
author = {Li, Qiang and Peer, Akshit and Cho, In Ho and Biswas, Rana and Kim, Jaeyoun},
abstractNote = {Replica molding often induces tribocharge on elastomers. To date, this phenomenon has been studied only on untextured elastomer surfaces even though replica molding is an effective method for their nanotexturing. Here we show that on elastomer surfaces nanotextured through replica molding the induced tribocharge also becomes patterned at nanoscale in close correlation with the nanotexture. Here, by applying Kelvin probe microscopy, electrohydrodynamic lithography, and electrostatic analysis to our model nanostructure, poly(dimethylsiloxane) nanocup arrays replicated from a polycarbonate nanocone array, we reveal that the induced tribocharge is highly localized within the nanocup, especially around its rim. Through finite element analysis, we also find that the rim sustains the strongest friction during the demolding process. From these findings, we identify the demolding-induced friction as the main factor governing the tribocharge’s nanoscale distribution pattern. Finally, by incorporating the resulting annular tribocharge into electrohydrodynamic lithography, we also accomplish facile realization of nanovolcanos with 10 nm-scale craters.},
doi = {10.1038/s41467-018-03319-4},
journal = {Nature Communications},
number = 1,
volume = 9,
place = {United States},
year = {Fri Mar 02 00:00:00 EST 2018},
month = {Fri Mar 02 00:00:00 EST 2018}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Save / Share: