skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Additive Manufacturing of Polyurethane Materials


ORNL worked with The DOW Chemical Company to validate the feasibility of 3D printing DOW’s polyurethane (PU) materials using ORNL’s equipment and know-how. This led to the development of the first directly-3D-printable PU material.

ORCiD logo [1]; ORCiD logo [1];  [1];  [2];  [3];  [3];  [3];  [3]
  1. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
  2. Dow Chemical Company, Saginaw, MI (United States)
  3. Dow Chemical Company, Midland, MI (United States)
Publication Date:
Research Org.:
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dow Chemical Company, Midland, MI (United States)
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Advanced Manufacturing Office (EE-5A)
OSTI Identifier:
Report Number(s):
DOE Contract Number:
Resource Type:
Technical Report
Country of Publication:
United States

Citation Formats

Kunc, Vlastimil, Lindahl, John M., Minneci, Robert P., Pyzik, Alek, Gorin, Craig, Allen, Sharon, Wilson, Keith, and Howard, Kevin. Additive Manufacturing of Polyurethane Materials. United States: N. p., 2017. Web. doi:10.2172/1412056.
Kunc, Vlastimil, Lindahl, John M., Minneci, Robert P., Pyzik, Alek, Gorin, Craig, Allen, Sharon, Wilson, Keith, & Howard, Kevin. Additive Manufacturing of Polyurethane Materials. United States. doi:10.2172/1412056.
Kunc, Vlastimil, Lindahl, John M., Minneci, Robert P., Pyzik, Alek, Gorin, Craig, Allen, Sharon, Wilson, Keith, and Howard, Kevin. 2017. "Additive Manufacturing of Polyurethane Materials". United States. doi:10.2172/1412056.
title = {Additive Manufacturing of Polyurethane Materials},
author = {Kunc, Vlastimil and Lindahl, John M. and Minneci, Robert P. and Pyzik, Alek and Gorin, Craig and Allen, Sharon and Wilson, Keith and Howard, Kevin},
abstractNote = {ORNL worked with The DOW Chemical Company to validate the feasibility of 3D printing DOW’s polyurethane (PU) materials using ORNL’s equipment and know-how. This led to the development of the first directly-3D-printable PU material.},
doi = {10.2172/1412056},
journal = {},
number = ,
volume = ,
place = {United States},
year = 2017,
month = 8

Technical Report:

Save / Share:
  • The evolving 3D printer technology is now at the point where some turbine components could be additive manufactured (AM) for both development and production purposes. However, this will require a significant evaluation program to qualify the process and components to meet current design and quality standards. The goal of the project was to begin characterization of the microstructure and mechanical properties of Nickel Alloy X (Ni-22Cr-18Fe-9Mo) test bars fabricated by powder bed fusion (PBF) AM processes that use either an electron beam (EB) or laser beam (LB) power source. The AM materials produced with the EB and LB processes displayedmore » significant differences in microstructure and resultant mechanical properties. Accordingly, during the design analysis of AM turbine components, the specific mechanical behavior of the material produced with the selected AM process should be considered. Comparison of the mechanical properties of both the EB and LB materials to those of conventionally processed Nickel Alloy X materials indicates the subject AM materials are viable alternatives for manufacture of some turbine components.« less
  • The purpose of this project was to develop surface treatments which will inhibit the formation of ice on turbine blades and propellers. ORNL worked with Piedmont Propulsion Systems, LLC and First Aviation Services Inc. to demonstrate a new surface treatment for two primary markets, aviation and wind turbines, as well as secondary markets such as power lines, bridges, boats, roofs and antennas among others. Exploring alternative surface treatments for wind turbines will provide anti-icing properties and erosion/abrasion prevention properties similar to those for aviation applications. A series of superhydrophobic coating materials was synthesized and successfully applied on anti-ice tape materialsmore » that could be used in a wide range of wind turbine and aviation applications to prevent ice accumulation. The coatings developed in this project were based on superhydrophobic particles of different geometries and sizes that were homogeneously dispersed in polymeric binders. The superhydrophobic features of the coatings are volumetric and their abrasion resistance was evaluated. Future research will involve the demonstration of anti-icing properties of the surface treatment developed in this project.« less
  • Additive manufacturing (AM) is considered an emerging technology that is expected to transform the way industry can make low-volume, high value complex structures. This disruptive technology promises to replace legacy manufacturing methods for the fabrication of existing components in addition to bringing new innovation for new components with increased functional and mechanical properties. This report outlines the outcome of a workshop on large-scale metal additive manufacturing held at Oak Ridge National Laboratory (ORNL) on March 11, 2016. The charter for the workshop was outlined by the Department of Energy (DOE) Advanced Manufacturing Office program manager. The status and impact ofmore » the Big Area Additive Manufacturing (BAAM) for polymer matrix composites was presented as the background motivation for the workshop. Following, the extension of underlying technology to low-cost metals was proposed with the following goals: (i) High deposition rates (approaching 100 lbs/h); (ii) Low cost (<$10/lbs) for steel, iron, aluminum, nickel, as well as, higher cost titanium, (iii) large components (major axis greater than 6 ft) and (iv) compliance of property requirements. The above concept was discussed in depth by representatives from different industrial sectors including welding, metal fabrication machinery, energy, construction, aerospace and heavy manufacturing. In addition, DOE’s newly launched High Performance Computing for Manufacturing (HPC4MFG) program was reviewed. This program will apply thermo-mechanical models to elucidate deeper understanding of the interactions between design, process, and materials during additive manufacturing. Following these presentations, all the attendees took part in a brainstorming session where everyone identified the top 10 challenges in large-scale metal AM from their own perspective. The feedback was analyzed and grouped in different categories including, (i) CAD to PART software, (ii) selection of energy source, (iii) systems development, (iv) material feedstock, (v) process planning, (vi) residual stress & distortion, (vii) post-processing, (viii) qualification of parts, (ix) supply chain and (x) business case. Furthermore, an open innovation network methodology was proposed to accelerate the development and deployment of new large-scale metal additive manufacturing technology with the goal of creating a new generation of high deposition rate equipment, affordable feed stocks, and large metallic components to enhance America’s economic competitiveness.« less
  • 3D printing originally known as additive manufacturing is a process of making 3 dimensional solid objects from a CAD file. This ground breaking technology is widely used for industrial and biomedical purposes such as building objects, tools, body parts and cosmetics. An important benefit of 3D printing is the cost reduction and manufacturing flexibility; complex parts are built at the fraction of the price. However, layer by layer printing of complex shapes adds error due to the surface roughness. Any such error results in poor quality products with inaccurate dimensions. The main purpose of this research is to measure themore » amount of printing errors for parts with different geometric shapes and to analyze them for finding optimal printing settings to minimize the error. We use a Design of Experiments framework, and focus on studying parts with cone and ellipsoid shapes. We found that the orientation and the shape of geometric shapes have significant effect on the printing error. From our analysis, we also determined the optimal orientation that gives the least printing error.« less
  • The report gives results of an engineering evaluation of technical options to reduce chlorofluorocarbon (CFC) emissions from flexible slabstock and molded polyurethane foam manufacturing plants. Among the technical options studied were recovery and recycle of CFC-11, alternative chemicals and processes, and substitute products. Two possible emission control methods were studied in detail: substitution of methylene chloride as the auxiliary foam blowing agent and carbon adsorption/recycle of exhausted CFC-11 vapors. Promising near-term control options identified for slabstock production were methylene chloride substitution for CFC-11, and establishment of a minimum foam density to reduce the amount of auxiliary blowing agent used. Formore » molded polyurethane foam production, use of chemical systems which eliminate the need for auxiliary blowing agents appeared to be a near-term option. Possible longer-term options included carbon adsorption with CFC-11 recovery, development of chemical systems requiring little or no auxiliary blowing agents for slabstock production, and commercialization of new alternative blowing agents. Each longer-term option has in common a need for additional information to adequately define the optimal implementation strategy.« less