skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Corrosion Properties of Powder Bed Fusion Additively Manufactured Stainless Steels.

Abstract

Abstract not provided.

Authors:
; ; ;
Publication Date:
Research Org.:
Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
Sponsoring Org.:
USDOE National Nuclear Security Administration (NNSA)
OSTI Identifier:
1406164
Report Number(s):
SAND2016-10727C
Journal ID: ISSN 0010--9312; 648561
DOE Contract Number:
AC04-94AL85000
Resource Type:
Conference
Resource Relation:
Journal Volume: 73; Journal Issue: 7; Conference: Proposed for presentation at the Electrochemical Society Prime 2016 held October 1-7, 2016 in Honolulu, Hawaii.
Country of Publication:
United States
Language:
English

Citation Formats

Schaller, Rebecca, Taylor, Jason Mark, Rodelas, Jeffrey, and Schindelholz, Eric John. Corrosion Properties of Powder Bed Fusion Additively Manufactured Stainless Steels.. United States: N. p., 2016. Web. doi:10.5006/2365.
Schaller, Rebecca, Taylor, Jason Mark, Rodelas, Jeffrey, & Schindelholz, Eric John. Corrosion Properties of Powder Bed Fusion Additively Manufactured Stainless Steels.. United States. doi:10.5006/2365.
Schaller, Rebecca, Taylor, Jason Mark, Rodelas, Jeffrey, and Schindelholz, Eric John. Sat . "Corrosion Properties of Powder Bed Fusion Additively Manufactured Stainless Steels.". United States. doi:10.5006/2365. https://www.osti.gov/servlets/purl/1406164.
@article{osti_1406164,
title = {Corrosion Properties of Powder Bed Fusion Additively Manufactured Stainless Steels.},
author = {Schaller, Rebecca and Taylor, Jason Mark and Rodelas, Jeffrey and Schindelholz, Eric John},
abstractNote = {Abstract not provided.},
doi = {10.5006/2365},
journal = {},
number = 7,
volume = 73,
place = {United States},
year = {Sat Oct 01 00:00:00 EDT 2016},
month = {Sat Oct 01 00:00:00 EDT 2016}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:
  • Abstract not provided.
  • The corrosion susceptibility of a laser powder bed fusion (LPBF) additively manufactured alloy, UNS S17400 (17-4 PH), was explored compared to conventional wrought material. Microstructural characteristics were characterized and related to corrosion behavior in quiescent, aqueous 0.6 M NaCl solutions. Electrochemical measurements demonstrated that the LPBF 17-4 PH alloy exhibited a reduced passivity range and active corrosion compared to its conventional wrought counterpart. Lastly, a micro-electrochemical cell was employed to further understand the effects of the local scale and attributed the reduced corrosion resistance of the LPBF material to pores with diameters ≥ 50 µm.
  • Abstract not provided.
  • Selective laser melting is a powder-based, additive-manufacturing process where a threedimensional part is produced, layer by layer, by using a high-energy laser beam to fuse the metallic powder particles. A particular challenge in this process is the selection of appropriate process parameters that result in parts with desired properties. In this study, we describe an approach to selecting parameters for high density (>99%) parts using 316L stainless steel. Though there has been significant success in achieving near-full density for 316L parts, this work has been limited to laser powers <225W. We discuss how we can exploit prior knowledge, design ofmore » computational experiments using a simple model of laser melting, and single-track experiments to determine the process parameters for use at laser powers up to 400W. Our results show that, at higher power values, there is a large range of scan speeds over which the relative density remains >99%, with the density reducing rapidly at high speeds due to insufficient melting, and less rapidly at low speeds due to the effect of voids created as the process enters keyhole mode.« less
  • Many traditional approaches for strengthening steels typically come at the expense of useful ductility, a dilemma known as strength–ductility trade-off. New metallurgical processing might offer the possibility of overcoming this. Here we report that austenitic 316L stainless steels additively manufactured via a laser powder-bed-fusion technique exhibit a combination of yield strength and tensile ductility that surpasses that of conventional 316L steels. High strength is attributed to solidification-enabled cellular structures, low-angle grain boundaries, and dislocations formed during manufacturing, while high uniform elongation correlates to a steady and progressive work-hardening mechanism regulated by a hierarchically heterogeneous microstructure, with length scales spanning nearlymore » six orders of magnitude. In addition, solute segregation along cellular walls and low-angle grain boundaries can enhance dislocation pinning and promote twinning. This work demonstrates the potential of additive manufacturing to create alloys with unique microstructures and high performance for structural applications.« less
    Cited by 1