skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Junction Quality of SnO 2-Based Perovskite Solar Cells Investigated by Nanometer-Scale Electrical Potential Profiling

Abstract

Electron-selective layers (ESLs) and hole-selective layers (HSLs) are critical in high-efficiency organic-inorganic lead halide perovskite (PS) solar cells for charge-carrier transport, separation, and collection. We developed a procedure to assess the quality of the ESL/PS junction by measuring potential distribution on cross-section of SnO 2-based perovskite solar cells using Kelvin probe force microscopy. Using the potential profiling, we compared three types of cells made of different ESLs but otherwise having identical device structure: cells with PS deposited directly on bare fluorine-doped SnO 2 (FTO)-coated glass; cells with an intrinsic SnO 2 thin layer on the top of FTO as an effective ESL; and cells with the SnO2 ESL and adding a self-assembled monolayer (SAM) of fullerene. The results reveal two major potential drops or electric fields at the ESL/PS and PS/HSL interfaces. The electric-field ratio between the ESL/PS and PS/HSL interfaces increased in devices as follows: FTO < SnO 2-ESL < SnO 2+SAM; this sequence explains the improvements of fill factor (FF) and open-circuit voltage ( V oc). The improvement of FF from the FTO to SnO 2-ESL cells may result from the reduction in voltage lose at the PS/HSL back interface and the improvement of V oc from themore » prevention of hole recombination at the ESL/PS front interface. The further improvements with adding a SAM is caused by the defect passivation at the ESL/PS interface, and hence, improvement of the junction quality. Furthermore, these nanoelectrical findings suggest possibilities for improving the device performance by further optimizing the SnO2-based ESL material quality and the ESL/PS interface.« less

Authors:
 [1];  [2]; ORCiD logo [2];  [3];  [4]; ORCiD logo [5]; ORCiD logo [2];  [5]
  1. National Renewable Energy Lab. (NREL), Golden, CO (United States); Colorado School of Mines, Golden, CO (United States)
  2. The Univ. of Toledo, Toledo, OH (United States)
  3. Colorado School of Mines, Golden, CO (United States)
  4. Chinese Academy of Science, Zhejiang Province (China)
  5. National Renewable Energy Lab. (NREL), Golden, CO (United States)
Publication Date:
Research Org.:
National Renewable Energy Lab. (NREL), Golden, CO (United States)
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
OSTI Identifier:
1404880
Report Number(s):
NREL/JA-5K00-67770
Journal ID: ISSN 1944-8244
Grant/Contract Number:
AC36-08GO28308
Resource Type:
Journal Article: Accepted Manuscript
Journal Name:
ACS Applied Materials and Interfaces
Additional Journal Information:
Journal Volume: 9; Journal Issue: 44; Journal ID: ISSN 1944-8244
Publisher:
American Chemical Society (ACS)
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; Kelvin probe force microscopy; junction quality; perovskite solar cell; electron-selective layer; interface; nanometer-scale; potential profile

Citation Formats

Xiao, Chuanxiao, Wang, Changlei, Ke, Weijun, Gorman, Brian P., Ye, Jichun, Jiang, Chun -Sheng, Yan, Yanfa, and Al-Jassim, Mowafak M.. Junction Quality of SnO2-Based Perovskite Solar Cells Investigated by Nanometer-Scale Electrical Potential Profiling. United States: N. p., 2017. Web. doi:10.1021/acsami.7b08582.
Xiao, Chuanxiao, Wang, Changlei, Ke, Weijun, Gorman, Brian P., Ye, Jichun, Jiang, Chun -Sheng, Yan, Yanfa, & Al-Jassim, Mowafak M.. Junction Quality of SnO2-Based Perovskite Solar Cells Investigated by Nanometer-Scale Electrical Potential Profiling. United States. doi:10.1021/acsami.7b08582.
Xiao, Chuanxiao, Wang, Changlei, Ke, Weijun, Gorman, Brian P., Ye, Jichun, Jiang, Chun -Sheng, Yan, Yanfa, and Al-Jassim, Mowafak M.. Fri . "Junction Quality of SnO2-Based Perovskite Solar Cells Investigated by Nanometer-Scale Electrical Potential Profiling". United States. doi:10.1021/acsami.7b08582.
@article{osti_1404880,
title = {Junction Quality of SnO2-Based Perovskite Solar Cells Investigated by Nanometer-Scale Electrical Potential Profiling},
author = {Xiao, Chuanxiao and Wang, Changlei and Ke, Weijun and Gorman, Brian P. and Ye, Jichun and Jiang, Chun -Sheng and Yan, Yanfa and Al-Jassim, Mowafak M.},
abstractNote = {Electron-selective layers (ESLs) and hole-selective layers (HSLs) are critical in high-efficiency organic-inorganic lead halide perovskite (PS) solar cells for charge-carrier transport, separation, and collection. We developed a procedure to assess the quality of the ESL/PS junction by measuring potential distribution on cross-section of SnO2-based perovskite solar cells using Kelvin probe force microscopy. Using the potential profiling, we compared three types of cells made of different ESLs but otherwise having identical device structure: cells with PS deposited directly on bare fluorine-doped SnO2 (FTO)-coated glass; cells with an intrinsic SnO2 thin layer on the top of FTO as an effective ESL; and cells with the SnO2 ESL and adding a self-assembled monolayer (SAM) of fullerene. The results reveal two major potential drops or electric fields at the ESL/PS and PS/HSL interfaces. The electric-field ratio between the ESL/PS and PS/HSL interfaces increased in devices as follows: FTO < SnO2-ESL < SnO2+SAM; this sequence explains the improvements of fill factor (FF) and open-circuit voltage (Voc). The improvement of FF from the FTO to SnO2-ESL cells may result from the reduction in voltage lose at the PS/HSL back interface and the improvement of Voc from the prevention of hole recombination at the ESL/PS front interface. The further improvements with adding a SAM is caused by the defect passivation at the ESL/PS interface, and hence, improvement of the junction quality. Furthermore, these nanoelectrical findings suggest possibilities for improving the device performance by further optimizing the SnO2-based ESL material quality and the ESL/PS interface.},
doi = {10.1021/acsami.7b08582},
journal = {ACS Applied Materials and Interfaces},
number = 44,
volume = 9,
place = {United States},
year = {Fri Oct 13 00:00:00 EDT 2017},
month = {Fri Oct 13 00:00:00 EDT 2017}
}

Journal Article:
Free Publicly Available Full Text
This content will become publicly available on October 13, 2018
Publisher's Version of Record

Save / Share: