skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Evaluation of the Aleph PIC Code on Benchmark Simulations.

Abstract

Abstract not provided.

Authors:
; ;
Publication Date:
Research Org.:
Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
Sponsoring Org.:
USDOE National Nuclear Security Administration (NNSA)
OSTI Identifier:
1404765
Report Number(s):
SAND2016-10074C
648110
DOE Contract Number:
AC04-94AL85000
Resource Type:
Conference
Resource Relation:
Conference: Proposed for presentation at the 69th Annual Gaseous Electronics Conference held October 10-14, 2016 in Bochum, Germany.
Country of Publication:
United States
Language:
English

Citation Formats

Boerner, Jeremiah J., Grillet, Anne, and Pacheco, Jose L. Evaluation of the Aleph PIC Code on Benchmark Simulations.. United States: N. p., 2016. Web.
Boerner, Jeremiah J., Grillet, Anne, & Pacheco, Jose L. Evaluation of the Aleph PIC Code on Benchmark Simulations.. United States.
Boerner, Jeremiah J., Grillet, Anne, and Pacheco, Jose L. 2016. "Evaluation of the Aleph PIC Code on Benchmark Simulations.". United States. doi:. https://www.osti.gov/servlets/purl/1404765.
@article{osti_1404765,
title = {Evaluation of the Aleph PIC Code on Benchmark Simulations.},
author = {Boerner, Jeremiah J. and Grillet, Anne and Pacheco, Jose L},
abstractNote = {Abstract not provided.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = 2016,
month =
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:
  • Abstract not provided.
  • The HTR-10 is a small (10 MWt) pebble-bed research reactor intended to develop pebble-bed reactor (PBR) technology in China. It will be used to test and develop fuel, verify PBR safety features, demonstrate combined electricity production and co-generation of heat, and provide experience in PBR design, operation, and construction. As the only currently operating PBR in the world, the HTR-10 can provide data of great interest to everyone involved in PBR technology. In particular, if it yields data of sufficient quality, it can be used as a benchmark for assessing the accuracy of computer codes proposed for use in PBRmore » analysis. This paper summarizes the evaluation for the International Reactor Physics Experiment Evaluation Project (IRPhEP) of data obtained in measurements of the HTR-10’s initial criticality experiment for use as benchmarks for reactor physics codes.« less
  • The RELAP code has been tested with benchmark experiments (such as the loss-of-fluid test experiments at the Idaho National Engineering Laboratory) at high pressures and temperatures characteristic of those encountered in loss-of-coolant accidents (LOCAs) in commercial light water power reactors. Application of RELAP to the LOCA analysis of a low pressure (< 7 atm) and low temperature (< 100{degree}C), plate-type research reactor, such as the University of Missouri Research Reactor (MURR), the high-flux breeder reactor, high-flux isotope reactor, and Advanced Test Reactor, requires resolution of questions involving overextrapolation to very low pressures and low temperatures, and calculations of the pulsedmore » boiling/reflood conditions in the narrow rectangular cross-section channels (typically 2 mm thick) of the plate fuel elements. The practical concern of this problem is that plate fuel temperatures predicted by RELAP5 (MOD2, version 3) during the pulsed boiling period can reach high enough temperatures to cause plate (clad) weakening, though not melting. Since an experimental benchmark of RELAP under such LOCA conditions is not available and since such conditions present substantial challenges to the code, it is important to verify the code predictions. The comparison of the pulsed boiling experiments with the RELAP calculations involves both visual observations of void fraction versus time and measurements of temperatures near the fuel plate surface.« less