skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: A Speckle Patterning Study For Laboratory-Scale DIC Experiments.


Abstract not provided.

; ;
Publication Date:
Research Org.:
Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
Sponsoring Org.:
USDOE National Nuclear Security Administration (NNSA)
OSTI Identifier:
Report Number(s):
Journal ID: ISSN 2191--5644; 648310
DOE Contract Number:
Resource Type:
Resource Relation:
Conference: Proposed for presentation at the iDICs 2016 Conference and Workshop held November 7-11, 2016 in Philadelphia, PA.
Country of Publication:
United States

Citation Formats

Kramer, Sharlotte LorraineBolyard, Reu, Phillip L., and Bonk, Sarah. A Speckle Patterning Study For Laboratory-Scale DIC Experiments.. United States: N. p., 2016. Web. doi:10.1007/978-3-319-51439-0_8.
Kramer, Sharlotte LorraineBolyard, Reu, Phillip L., & Bonk, Sarah. A Speckle Patterning Study For Laboratory-Scale DIC Experiments.. United States. doi:10.1007/978-3-319-51439-0_8.
Kramer, Sharlotte LorraineBolyard, Reu, Phillip L., and Bonk, Sarah. 2016. "A Speckle Patterning Study For Laboratory-Scale DIC Experiments.". United States. doi:10.1007/978-3-319-51439-0_8.
title = {A Speckle Patterning Study For Laboratory-Scale DIC Experiments.},
author = {Kramer, Sharlotte LorraineBolyard and Reu, Phillip L. and Bonk, Sarah},
abstractNote = {Abstract not provided.},
doi = {10.1007/978-3-319-51439-0_8},
journal = {},
number = ,
volume = ,
place = {United States},
year = 2016,
month =

Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:
  • Abstract not provided.
  • The migration of radionuclides through intact tuff was studied using tuff from Yucca Mountain, Nevada. The tuff samples were both highly zeolitized ash-fall tuff from the Calico Hills and densely welded devitrified tuff from the Topopah Springs member of the Paintbrush tuff. Tritiated water and pertechnetate were used as conservative tracers. The sorbing tracers {sup 85}Sr, {sup 137}Cs, and {sup 133}Ba were used with the devitrified tuff only. Greater tailing in the elution curves of the densely welded tuff samples was observed that could be fit by adjusting the dispersion coefficient in the conventional Advection Dispersion Equation, ADE. The curvesmore » could be fit using time dependent dispersion as was previously observed for sediments and alluvium by Dieulin, Matheron, and de Marsily. The peak of strontium concentration was expected to arrive after 1.5 years based on the conventional ADE and assuming a linear K{sub d} of 26 ml/g. The observed elution had significant strontium in the first sample taken at 2 weeks after injection. The peak in the strontium elution occurred at 5 weeks. The correct arrival time for the strontium peak was achieved using a one dimensional analytic solution with time dependent dispersion. The dispersion coefficient as a function of time used to fit the conservative tracers was found to predict the peak arrival of the sorbing tracers. The K{sub d} used was the K{sub d} determined by the batch method on crushed tuff. 23 refs., 9 figs., 2 tabs.« less
  • Laboratory-scale (25-50 mg) detonations of PETN, RDX, HNS, and TNT have been carried out in a high-vacuum chamber, and collisionless molecular beams of the freely expanding detonation products have been analyzed as a function of time with a mass spectrometer. Concurrently, time-sequenced schlieren and shadowgraph images of the initial expansion of the product plume are recorded using a pulsed laser for illumination. These data tie the chemistry and hydrodynamics of the detonation event together. The results, interpreted with the aid of a computer model, suggest that this experiment freezes the chemical reactions of detonation by rapid adiabatic cooling and providesmore » a continuum of samples in the molecular beam, representing the sequence of reactions in the detonating charge. With a suitable model of the expansion hydrodynamics, the hydrodynamic histories of a sequence of volume elements can be associated with their frozen chemistries. We expect experiments like this to provide a test for molecular models of detonation. 10 refs., 5 figs.« less
  • Scale squeezes were performed on thirteen wells in the Duri Field, Sumatra. At the time the squeezes were completed, seven were designed to be `Acid Squeezes` and six were designed to be `Neutral Squeezes.` In the course of preparing for the scale squeezes, produced waters were collected and analyzed. In addition, scale inhibitor evaluations, and inhibitor compatibility studies were completed. Simulated squeezes were done in the laboratory to predict field performance. The methodologies and results of the background work are reported. In addition, the relative effectiveness of the two sets of squeezes is discussed. The inhibitor flowback concentrations alter themore » squeezes, in all cases, can be explained using speciation chemistry and the amorphous and crystalline phase solubilities of the inhibitor used. The wells squeezed with a more acidic inhibitor have more predictable and uniform inhibitor return concentration curves than the wells squeezed with a more neutral scale inhibitor.« less
  • An objective of the High Temperature Gas Reactor fuel development and qualification program for the United States Department of Energy has been to qualify fuel fabricated in prototypic production-scale equipment. The quality and characteristics of the tristructural isotropic coatings on fuel kernels are influenced by the equipment scale and processing parameters. Some characteristics affecting product quality were suppressed while others have become more significant in the larger equipment. Changes to the composition and method of producing resinated graphite matrix material has eliminated the use of hazardous, flammable liquids and enabled it to be procured as a vendor-supplied feed stock. Amore » new method of overcoating TRISO particles with the resinated graphite matrix eliminates the use of hazardous, flammable liquids, produces highly spherical particles with a narrow size distribution, and attains product yields in excess of 99%. Compact fabrication processes have been scaled-up and automated with relatively minor changes to compact quality to manual laboratory-scale processes. The impact on statistical variability of the processes and the products as equipment was scaled are discussed. The prototypic production-scale processes produce test fuels that meet fuel quality specifications.« less