skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Performance of Ni Alloys with Exposure to High-temperature Supercritical Fluids

Authors:
; ; ; ;
Publication Date:
Research Org.:
National Energy Technology Lab. (NETL), Pittsburgh, PA, and Morgantown, WV (United States). In-house Research
Sponsoring Org.:
USDOE Office of Fossil Energy (FE)
OSTI Identifier:
1398269
Report Number(s):
NETL-PUB-21252
Resource Type:
Conference
Resource Relation:
Conference: “Performance of Ni Alloys with Exposure to High-temperature Supercritical Fluids,” Poster at the Gordon Research Conference on High Temperature Corrosion, New London, NH, July 9-14, 2017
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; Oxidation, supercritical, CO2, Steam, Nickel Alloys, Pressure

Citation Formats

Holcomb, G. R., Rozman, K. A., Kapoor, M., Carney, C., and Dogan, O. N. Performance of Ni Alloys with Exposure to High-temperature Supercritical Fluids. United States: N. p., 2017. Web.
Holcomb, G. R., Rozman, K. A., Kapoor, M., Carney, C., & Dogan, O. N. Performance of Ni Alloys with Exposure to High-temperature Supercritical Fluids. United States.
Holcomb, G. R., Rozman, K. A., Kapoor, M., Carney, C., and Dogan, O. N. Sun . "Performance of Ni Alloys with Exposure to High-temperature Supercritical Fluids". United States. doi:. https://www.osti.gov/servlets/purl/1398269.
@article{osti_1398269,
title = {Performance of Ni Alloys with Exposure to High-temperature Supercritical Fluids},
author = {Holcomb, G. R. and Rozman, K. A. and Kapoor, M. and Carney, C. and Dogan, O. N.},
abstractNote = {},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Sun Jul 09 00:00:00 EDT 2017},
month = {Sun Jul 09 00:00:00 EDT 2017}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:
  • Limited experimental data exists for the specific core loss and dynamic B-H loops for soft magnetic materials for the combined conditions of high frequency and high temperature. This experimental study investigates the specific core loss and dynamic B-H characteristics of a nickel-iron crystalline magnetic alloy (Supermalloy) and two-iron-based amorphous magnetic materials (Metglas 2605S-3A and Metglas 2605SC) over the frequency range of 1--50 kHz and temperature range of 23--300 C under sinusoidal voltage excitation. The effects of maximum magnetic flux density, frequency, and temperature on the specific core loss and on the size and shape of the B-H loops are examined.more » The Supermalloy and Metglas 2605S-3A and 2605SC data are used to compare the core loss of transformers with identical kVA and voltage ratings.« less
  • Supercritical water oxidation (SCWO) is a promising and very effective method for the oxidation of organic wastes. Its high solubility for organic compounds and its special physical properties (i.e. density, viscosity) resulting in a key advantage over standard processes like incineration. Due to the formation of HCl during oxidation of chlorine organics, a severe corrosion attack of most of the materials has been observed. This paper describes the results of investigations of high temperature alloys like alloy No. 214, alloy 602 CA, G-30 alloy, alloy 625, and alloy 686, exposed at 400 bar and 420 C for 24 hours inmore » a CH{sub 2}Cl{sub 2}/H{sub 2}O{sub 2} mixture with about 2,000 wppm of chloride. The weight losses of all, samples varied between 3 mg/cm{sup 2} for G-30 alloy and about 73 mg/cm{sup 2} for alloy 686. The alloy No. 214 showed an increased corrosion for the preoxidized material, whereas the corrosion rate of alloy 602 CA was reduced by a factor of 3 due to the preoxidation at 900 C, prior to SCWO-exposure. The post mortem analysis revealed that alloy 686 has lost most of its nickel down to a depth of about 150 pm. The G-30 alloy showed a good corrosion behavior because of the formation of a protective oxide layer during the exposure. The layer was homogeneous with a thickness of about 12 pm, but a slight nickel leaching was observed, too.« less
  • This paper introduces the subject of high-temperature corrosion by halogen species as derived from a variety of gaseous or liquid environments. Halogenation and oxy-halogenation behavior, involving volatile and condensing species, is contrasted with better defined high-temperature oxidation processes, paying particular attention to the chemical and physiochemical factors involved therein. Current mechanisms and limitations regarding our knowledge of halogen corrosion, leading at times to excessive spaccation, linear or accelerating kinetics, cracking, internal attack of alloy matrices, etc. are reviewed and the difficulties associated with the quest for resistant alloys are outlined, more recent efforts in defining surface morphologies from longer-term testsmore » have created more confidence over earlier less reliable studies in this respect. Results of studies at 900-1000 C on a series of commercial alloys exposed to chlorine-containing gases are presented to demonstrate an approach to alloy design and development. Limitations due to spaccation, vaporization and internal attack are demonstrated with reference to those constituents involved therein. Performance in other environments, including HF, is described, as is work conducted on metals or simpler experimental alloys.« less