skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Large-Eddy Simulation of an n-Dodecane Spray Flame Under Different Ambient Oxygen Conditions

Abstract

An n-dodecane spray flame was simulated using a dynamic structure large eddy simulation (LES) model coupled with a detailed chemistry combustion model to understand the ignition processes and the quasi-steady state flame structures. This study focuses on the effect of different ambient oxygen concentrations, 13%, 15% and 21% at an ambient temperature of 900 K and an ambient density of 22.8 kg/m3, which are typical diesel-engine relevant conditions with different levels of exhaust gas recirculation (EGR). The liquid spray was treated with a traditional Lagrangian method. A 103-species skeletal mechanism was used for the n-dodecane chemical kinetic model. It is observed that the main ignitions occur in rich mixture and the flames are thickened around 35 to 40 mm off the spray axis due to the enhanced turbulence induced by the strong recirculation upstream, just behind the head of the flames at different oxygen concentrations. At 1 ms after the start of injection, the soot production is dominated by the broader region of high temperature in rich mixture instead of the stronger oxidation of the high peak temperature. Multiple realizations were performed for the 15% O2 condition to understand the realization to realization variation and to establish best practices formore » ensembleaveraging diesel spray flames. Two indexes are defined. The structure-similarity index analysis suggests at least 5 realizations are needed to obtain 99% similarity for mixture fraction if the average of 16 realizations are used as the target at 0.8 ms. However, this scenario may be different for different scalars of interest. It is found that 6 realizations would be enough to reach 99% of similarity for temperature, while 8 and 14 realizations are required to achieve 99% similarity for soot and OH mass fraction, respectively. Similar findings are noticed at 1 ms. More realizations are needed for the magnitude-similarity index for the similar level of similarity as the structure-similarity index« less

Authors:
; ;
Publication Date:
Research Org.:
Argonne National Lab. (ANL), Argonne, IL (United States)
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE) - Office of Vehicle Technology
OSTI Identifier:
1391744
DOE Contract Number:  
AC02-06CH11357
Resource Type:
Journal Article
Resource Relation:
Journal Name: Journal of Energy Resources Technology; Journal Volume: 138; Journal Issue: 3
Country of Publication:
United States
Language:
English

Citation Formats

Pei, Yuanjiang, Hu, Bing, and Som, Sibendu. Large-Eddy Simulation of an n-Dodecane Spray Flame Under Different Ambient Oxygen Conditions. United States: N. p., 2016. Web. doi:10.1115/1.4032771.
Pei, Yuanjiang, Hu, Bing, & Som, Sibendu. Large-Eddy Simulation of an n-Dodecane Spray Flame Under Different Ambient Oxygen Conditions. United States. doi:10.1115/1.4032771.
Pei, Yuanjiang, Hu, Bing, and Som, Sibendu. Wed . "Large-Eddy Simulation of an n-Dodecane Spray Flame Under Different Ambient Oxygen Conditions". United States. doi:10.1115/1.4032771.
@article{osti_1391744,
title = {Large-Eddy Simulation of an n-Dodecane Spray Flame Under Different Ambient Oxygen Conditions},
author = {Pei, Yuanjiang and Hu, Bing and Som, Sibendu},
abstractNote = {An n-dodecane spray flame was simulated using a dynamic structure large eddy simulation (LES) model coupled with a detailed chemistry combustion model to understand the ignition processes and the quasi-steady state flame structures. This study focuses on the effect of different ambient oxygen concentrations, 13%, 15% and 21% at an ambient temperature of 900 K and an ambient density of 22.8 kg/m3, which are typical diesel-engine relevant conditions with different levels of exhaust gas recirculation (EGR). The liquid spray was treated with a traditional Lagrangian method. A 103-species skeletal mechanism was used for the n-dodecane chemical kinetic model. It is observed that the main ignitions occur in rich mixture and the flames are thickened around 35 to 40 mm off the spray axis due to the enhanced turbulence induced by the strong recirculation upstream, just behind the head of the flames at different oxygen concentrations. At 1 ms after the start of injection, the soot production is dominated by the broader region of high temperature in rich mixture instead of the stronger oxidation of the high peak temperature. Multiple realizations were performed for the 15% O2 condition to understand the realization to realization variation and to establish best practices for ensembleaveraging diesel spray flames. Two indexes are defined. The structure-similarity index analysis suggests at least 5 realizations are needed to obtain 99% similarity for mixture fraction if the average of 16 realizations are used as the target at 0.8 ms. However, this scenario may be different for different scalars of interest. It is found that 6 realizations would be enough to reach 99% of similarity for temperature, while 8 and 14 realizations are required to achieve 99% similarity for soot and OH mass fraction, respectively. Similar findings are noticed at 1 ms. More realizations are needed for the magnitude-similarity index for the similar level of similarity as the structure-similarity index},
doi = {10.1115/1.4032771},
journal = {Journal of Energy Resources Technology},
number = 3,
volume = 138,
place = {United States},
year = {Wed Mar 16 00:00:00 EDT 2016},
month = {Wed Mar 16 00:00:00 EDT 2016}
}