Magnetic Measurements of Storage Ring Magnets for the APS Upgrade Project

Conference · Thu Jun 01 00:00:00 EDT 2017

DOI:https://doi.org/10.18429· OSTI ID:1379945

Doose, C.; Dejus, R.; Jaski, M.; Jansma, W.; Collins, J.; Donnelly, A.; Liu, J.; Cease, H.; Decker, G.; Jain, A.; DiMarco, J.

Extensive prototyping of storage ring magnets is ongoing at the Advanced Photon Source (APS) in support of the APS Multi-Bend Achromat (MBA) upgrade project (APS-U) [1]. As part of the R&D activities four quadrupole magnets with slightly different geometries and pole tip materials, and one sextupole magnet with vanadium permendur (VP) pole tips were designed, built and tested. Magnets were measured individually using a rotating coil and a Hall probe for detailed mapping of the magnetic field. Magnets were then assembled and aligned relative to each other on a steel support plate and concrete plinth using precision machined surfaces to gain experience with the alignment method chosen for the APS-U storage ring magnets. The required alignment of magnets on a common support structure is 30 μm rms. Measurements of magnetic field quality, strength and magnet alignment after subjecting the magnets and assemblies to different tests are presented.

• Research Organization: Argonne National Lab. (ANL), Argonne, IL (United States)
• Sponsoring Organization: USDOE Office of Science (SC), Basic Energy Sciences (BES)
• DOE Contract Number: AC02-06CH11357
• OSTI ID: 1379945
• Resource Relation: Conference: 2016 North American Particle Accelerator Conference, 10/09/16 - 10/14/16, Chicago, IL, US
• Country of Publication: United States
• Language: English