skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Laser Fabrication of Two-Dimensional Rotating-Lattice Single Crystal

Abstract

A rotating lattice single (RLS) crystal is a unique form of solid, which was fabricated recently as one-dimensional architecture in glass via solid state transformation induced by laser irradiation. In these objects, the lattice rotates gradually and predictably about an axis that lies in the plane of the crystal and is normal to the laser scanning direction. This paper reports on the fabrication of Sb 2S 3 two-dimensional (2D) RLS crystals on the surface of 16SbI 3-84Sb 2S 3 glass, as a model example: individual RLS crystal lines are joined together using "stitching" or "rastering" as two successful protocols. The electron back scattered diffraction mapping and scanning Laue X-ray microdiffraction of the 2D RLS crystals show gradual rotation of lattice comprising of two components, one along the length of each line and another normal to this direction. The former component is determined by the rotation of the first line of the 2D pattern, but the relative contribution of the last component depends on the extent of overlap between two successive lines. By the appropriate choice of initial seed orientation and the direction of scanning, it is possible to control the lattice rotation, and even to reduce it down to 5more » for a 50 × 50 μm 2 2D pattern of Sb 2S 3 crystal.« less

Authors:
ORCiD logo [1];  [1]; ORCiD logo [1];  [2]; ORCiD logo [1]
  1. Lehigh Univ., Bethlehem, PA (United States)
  2. Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)
Publication Date:
Research Org.:
Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)
Sponsoring Org.:
USDOE Office of Science (SC), Basic Energy Sciences (BES) (SC-22)
OSTI Identifier:
1379798
Grant/Contract Number:  
AC02-05CH11231
Resource Type:
Journal Article: Accepted Manuscript
Journal Name:
Crystal Growth and Design
Additional Journal Information:
Journal Volume: 17; Journal Issue: 4; Journal ID: ISSN 1528-7483
Publisher:
American Chemical Society
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE

Citation Formats

Savytskii, Dmytro, Au-Yeung, Courtney, Dierolf, Volkmar, Tamura, Nobumichi, and Jain, Himanshu. Laser Fabrication of Two-Dimensional Rotating-Lattice Single Crystal. United States: N. p., 2017. Web. doi:10.1021/acs.cgd.6b01709.
Savytskii, Dmytro, Au-Yeung, Courtney, Dierolf, Volkmar, Tamura, Nobumichi, & Jain, Himanshu. Laser Fabrication of Two-Dimensional Rotating-Lattice Single Crystal. United States. doi:10.1021/acs.cgd.6b01709.
Savytskii, Dmytro, Au-Yeung, Courtney, Dierolf, Volkmar, Tamura, Nobumichi, and Jain, Himanshu. Thu . "Laser Fabrication of Two-Dimensional Rotating-Lattice Single Crystal". United States. doi:10.1021/acs.cgd.6b01709. https://www.osti.gov/servlets/purl/1379798.
@article{osti_1379798,
title = {Laser Fabrication of Two-Dimensional Rotating-Lattice Single Crystal},
author = {Savytskii, Dmytro and Au-Yeung, Courtney and Dierolf, Volkmar and Tamura, Nobumichi and Jain, Himanshu},
abstractNote = {A rotating lattice single (RLS) crystal is a unique form of solid, which was fabricated recently as one-dimensional architecture in glass via solid state transformation induced by laser irradiation. In these objects, the lattice rotates gradually and predictably about an axis that lies in the plane of the crystal and is normal to the laser scanning direction. This paper reports on the fabrication of Sb2S3 two-dimensional (2D) RLS crystals on the surface of 16SbI3-84Sb2S3 glass, as a model example: individual RLS crystal lines are joined together using "stitching" or "rastering" as two successful protocols. The electron back scattered diffraction mapping and scanning Laue X-ray microdiffraction of the 2D RLS crystals show gradual rotation of lattice comprising of two components, one along the length of each line and another normal to this direction. The former component is determined by the rotation of the first line of the 2D pattern, but the relative contribution of the last component depends on the extent of overlap between two successive lines. By the appropriate choice of initial seed orientation and the direction of scanning, it is possible to control the lattice rotation, and even to reduce it down to 5 for a 50 × 50 μm 2 2D pattern of Sb2S3 crystal.},
doi = {10.1021/acs.cgd.6b01709},
journal = {Crystal Growth and Design},
number = 4,
volume = 17,
place = {United States},
year = {Thu Mar 09 00:00:00 EST 2017},
month = {Thu Mar 09 00:00:00 EST 2017}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Citation Metrics:
Cited by: 1 work
Citation information provided by
Web of Science

Save / Share: