Temperature effect of elastic anisotropy and internal strain development in advanced nanostructured alloys: An in-situ synchrotron X-ray investigation

Gan, Yingye; Mo, Kun; Yun, Di; Hoelzer, David T.; Miao, Yinbin; Liu, Xiang; Lan, Kuan-Che; Park, Jun-Sang; Almer, Jonathan; Chen, Tianyi; Zhao, Huijuan

doi:10.1016/j.msea.2017.03.068

Title: Temperature effect of elastic anisotropy and internal strain development in advanced nanostructured alloys: An in-situ synchrotron X-ray investigation

Journal Article · Sat Apr 01 00:00:00 EDT 2017 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

DOI:https://doi.org/10.1016/j.msea.2017.03.068· OSTI ID:1373890

Gan, Yingye; Mo, Kun; Yun, Di; Hoelzer, David T.; Miao, Yinbin; Liu, Xiang; Lan, Kuan-Che; Park, Jun-Sang; Almer, Jonathan; Chen, Tianyi; Zhao, Huijuan

Nanostructured ferritic alloys (NFAs) are a promising structural material for advanced nuclear systems due to their exceptional radiation tolerance and high-temperature mechanical properties. Their remarkable properties result from the ultrafine ultrahigh density Y-Ti-O nanoclusters dispersed within the ferritic matrix. In this work, we performed in-situ synchrotron X-ray diffraction tests to study the tensile deformation process of the three types of NFAs: 9YWTV, 14YWT-sm13, and 14YWT-sm170 at both room temperature and elevated temperatures. A technique was developed, combining Kroner’s model and X-ray measurement, to determine the intrinsic monocrystal elastic-stiffness constants, and polycrystal Young’s modulus and Poisson’s ratio of the NFAs. Temperature dependence of elastic anisotropy was observed in the NFAs. An analysis of intergranular strain and strengthening factors determined that 14YWT-sm13 had a higher resistance to temperature softening compared to 9YWTV, attributed to the more effective nanoparticle strengthening during high-temperature mechanical loading.

Cite

Export

Save

Research Organization:: Argonne National Laboratory (ANL), Argonne, IL (United States)

Sponsoring Organization:: USDOE Office of Nuclear Energy - Nuclear Energy University Programs (NEUP)

DOE Contract Number:: AC02-06CH11357

OSTI ID:: 1373890

Journal Information:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing, Vol. 692; ISSN 0921-5093

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

References (49)

Recent results of the reduced activation ferritic/martensitic steel development Jitsukawa, S.; Kimura, A.; Kohyama, A. Journal of Nuclear Materials, Vol. 329-333 https://doi.org/10.1016/j.jnucmat.2004.04.319	journal	August 2004
A review of refractory metal alloys and mechanically alloyed-oxide dispersion strengthened steels for space nuclear power systems El-Genk, Mohamed S.; Tournier, Jean-Michel Journal of Nuclear Materials, Vol. 340, Issue 1 https://doi.org/10.1016/j.jnucmat.2004.10.118	journal	April 2005
Tensile and creep properties of an oxide dispersion-strengthened ferritic steel Klueh, R. L.; Maziasz, P. J.; Kim, I. S. Journal of Nuclear Materials, Vol. 307-311 https://doi.org/10.1016/S0022-3115(02)01046-2	journal	December 2002
Creep response and deformation processes in nanocluster-strengthened ferritic steels Hayashi, T.; Sarosi, P. M.; Schneibel, J. H. Acta Materialia, Vol. 56, Issue 7 https://doi.org/10.1016/j.actamat.2007.11.038	journal	April 2008
Defect and void evolution in oxide dispersion strengthened ferritic steels under 3.2 MeV Fe+ ion irradiation with simultaneous helium injection Kim, I. -S; Hunn, J. D.; Hashimoto, N. Journal of Nuclear Materials, Vol. 280, Issue 3 https://doi.org/10.1016/S0022-3115(00)00066-0	journal	August 2000
Helium bubble distributions in a nanostructured ferritic alloy Edmondson, P. D.; Parish, C. M.; Zhang, Y. Journal of Nuclear Materials, Vol. 434, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2012.11.049	journal	March 2013
Investigation of High-Energy Ion-Irradiated MA957 Using Synchrotron Radiation under In-Situ Tension Mo, Kun; Yun, Di; Miao, Yinbin Materials, Vol. 9, Issue 1 https://doi.org/10.3390/ma9010015	journal	January 2016
Recent Developments in Irradiation-Resistant Steels Odette, G. R.; Alinger, M. J.; Wirth, B. D. Annual Review of Materials Research, Vol. 38, Issue 1, p. 471-503 https://doi.org/10.1146/annurev.matsci.38.060407.130315	journal	August 2008
Stability of ferritic MA/ODS alloys at high temperatures Miller, M. K.; Hoelzer, D. T.; Kenik, E. A. Intermetallics, Vol. 13, Issue 3-4 https://doi.org/10.1016/j.intermet.2004.07.036	journal	March 2005
TEM Characterization of Tensile-Tested 14YWT Nanostructured Ferritic Alloys Bentley, J.; Hoelzer, Dt Microscopy and Microanalysis, Vol. 14, Issue S2 https://doi.org/10.1017/S1431927608088296	journal	August 2008
Mechanical properties of neutron irradiated nanostructured ferritic alloy 14YWT McClintock, D. A.; Hoelzer, D. T.; Sokolov, M. A. Journal of Nuclear Materials, Vol. 386-388 https://doi.org/10.1016/j.jnucmat.2008.12.104	journal	April 2009
Atom probe tomography of nanoscale particles in ODS ferritic alloys Miller, M. K.; Kenik, E. A.; Russell, K. F. Materials Science and Engineering: A, Vol. 353, Issue 1-2 https://doi.org/10.1016/S0921-5093(02)00680-9	journal	July 2003
Present development status of EUROFER and ODS-EUROFER for application in blanket concepts Lindau, R.; Möslang, A.; Rieth, M. Fusion Engineering and Design, Vol. 75-79 https://doi.org/10.1016/j.fusengdes.2005.06.186	journal	November 2005
Nanoscale characterisation of ODS–Eurofer 97 steel: An atom-probe tomography study Williams, Ceri A.; Marquis, Emmanuelle A.; Cerezo, Alfred Journal of Nuclear Materials, Vol. 400, Issue 1 https://doi.org/10.1016/j.jnucmat.2010.02.007	journal	May 2010
Effect of strain on the stabilization of oxygen-enriched nanoclusters in Fe-based alloys Zhao, H.; Fu, C. L.; Krcmar, M. Physical Review B, Vol. 84, Issue 14 https://doi.org/10.1103/PhysRevB.84.144115	journal	October 2011
Vacancy Mechanism of High Oxygen Solubility and Nucleation of Stable Oxygen-Enriched Clusters in Fe Fu, C. L.; Krčmar, Maja; Painter, G. S. Physical Review Letters, Vol. 99, Issue 22 https://doi.org/10.1103/PhysRevLett.99.225502	journal	November 2007
Formation mechanism and the role of nanoparticles in Fe-Cr ODS steels developed for radiation tolerance Hsiung, Luke L.; Fluss, Michael J.; Tumey, Scott J. Physical Review B, Vol. 82, Issue 18 https://doi.org/10.1103/PhysRevB.82.184103	journal	November 2010
Vacancies as a constitutive element for the design of nanocluster-strengthened ferritic steels Miller, M. K.; Fu, C. L.; Krcmar, M. Frontiers of Materials Science in China, Vol. 3, Issue 1 https://doi.org/10.1007/s11706-009-0001-8	journal	November 2008
Characterization of precipitates in MA/ODS ferritic alloys Miller, M. K.; Russell, K. F.; Hoelzer, D. T. Journal of Nuclear Materials, Vol. 351, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2006.02.004	journal	June 2006
Role of alloying elements in nanostructured ferritic steels Miller, M. K.; Parish, C. M. Materials Science and Technology, Vol. 27, Issue 4 https://doi.org/10.1179/1743284710Y.0000000039	journal	April 2011
Three-dimensional atom probe observation of nanoscale titanium-oxygen clustering in an oxide-dispersion-strengthened Fe-12Cr-3W-0.4Ti + Y2O3 ferritic alloy Larson, D. J.; Maziasz, P. J.; Kim, I-S Scripta Materialia, Vol. 44, Issue 2 https://doi.org/10.1016/S1359-6462(00)00593-5	journal	February 2001
Stability of nanometer-sized oxide clusters in mechanically-alloyed steel under ion-induced displacement cascade damage conditions Pareige, P.; Miller, M. K.; Stoller, R. E. Journal of Nuclear Materials, Vol. 360, Issue 2 https://doi.org/10.1016/j.jnucmat.2006.09.011	journal	February 2007
Stability of nanoclusters in 14YWT oxide dispersion strengthened steel under heavy ion-irradiation by atom probe tomography He, Jianchao; Wan, Farong; Sridharan, Kumar Journal of Nuclear Materials, Vol. 455, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2014.03.024	journal	December 2014
Temperature dependence of strengthening mechanisms in the nanostructured ferritic alloy 14YWT: Part I—Mechanical and microstructural observations Kim, Jeoung Han; Byun, Thak Sang; Hoelzer, David T. Materials Science and Engineering: A, Vol. 559 https://doi.org/10.1016/j.msea.2012.08.042	journal	January 2013
Size-dependent characteristics of ultra-fine oxygen-enriched nanoparticles in austenitic steels Miao, Yinbin; Mo, Kun; Zhou, Zhangjian Journal of Nuclear Materials, Vol. 480 https://doi.org/10.1016/j.jnucmat.2016.08.014	journal	November 2016
The comparison of microstructures and mechanical properties between 14Cr-Al and 14Cr-Ti ferritic ODS alloys Zhang, Guangming; Zhou, Zhangjian; Mo, Kun Materials & Design, Vol. 98 https://doi.org/10.1016/j.matdes.2016.02.117	journal	May 2016
The microstructure and mechanical properties of Al-containing 9Cr ODS ferritic alloy Zhang, Guangming; Zhou, Zhangjian; Mo, Kun Journal of Alloys and Compounds, Vol. 648 https://doi.org/10.1016/j.jallcom.2015.06.214	journal	November 2015
In situ synchrotron tensile investigations on 14YWT, MA957, and 9-Cr ODS alloys Lin, Jun-Li; Mo, Kun; Yun, Di Journal of Nuclear Materials, Vol. 471 https://doi.org/10.1016/j.jnucmat.2015.10.049	journal	April 2016
Load partitioning between ferrite/martensite and dispersed nanoparticles of a 9Cr ferritic/martensitic (F/M) ODS steel at high temperatures Zhang, Guangming; Mo, Kun; Miao, Yinbin Materials Science and Engineering: A, Vol. 637 https://doi.org/10.1016/j.msea.2015.04.037	journal	June 2015
Fracture behavior of 9Cr nanostructured ferritic alloy with improved fracture toughness Byun, Thak Sang; Yoon, Ji Hyun; Wee, Sung Hun Journal of Nuclear Materials, Vol. 449, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2014.03.007	journal	June 2014
Process development for 9Cr nanostructured ferritic alloy (NFA) with high fracture toughness Byun, Thak Sang; Yoon, Ji Hyun; Hoelzer, David T. Journal of Nuclear Materials, Vol. 449, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.10.007	journal	June 2014
Influence of processing on the microstructure and mechanical properties of 14YWT Hoelzer, D. T.; Unocic, K. A.; Sokolov, M. A. Journal of Nuclear Materials, Vol. 471 https://doi.org/10.1016/j.jnucmat.2015.12.011	journal	April 2016
EFTEM and Spectrum Imaging of Mechanically Alloyed Oxide-Dispersion-Strengthened 12YWT and 14YWT Ferritic Steels Bentley, J.; Hoelzer, D. T.; Coffey, D. W. Microscopy and Microanalysis, Vol. 10, Issue S02 https://doi.org/10.1017/S1431927604886276	journal	August 2004
Structural origins for the high plasticity of a Zr–Cu–Ni–Al bulk metallic glass Qu, D. D.; Liss, K. -D.; Sun, Y. J. Acta Materialia, Vol. 61, Issue 1 https://doi.org/10.1016/j.actamat.2012.09.062	journal	January 2013
Synchrotron study on load partitioning between ferrite/martensite and nanoparticles of a 9Cr ODS steel Mo, Kun; Zhou, Zhangjian; Miao, Yinbin Journal of Nuclear Materials, Vol. 455, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2014.06.060	journal	December 2014
The interfacial orientation relationship of oxide nanoparticles in a hafnium-containing oxide dispersion-strengthened austenitic stainless steel Miao, Yinbin; Mo, Kun; Cui, Bai Materials Characterization, Vol. 101 https://doi.org/10.1016/j.matchar.2015.01.015	journal	March 2015
Temperature and particle size effects on flow localization of 9–12%Cr ferritic/martensitic steel by in situ X-ray diffraction and small angle scattering Pan, Xiao; Wu, Xianglin; Chen, Xiang Journal of Nuclear Materials, Vol. 398, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2009.10.035	journal	March 2010
Lattice strain and damage evolution of 9–12%Cr ferritic/martensitic steel during in situ tensile test by X-ray diffraction and small angle scattering Pan, Xiao; Wu, Xianglin; Mo, Kun Journal of Nuclear Materials, Vol. 407, Issue 1 https://doi.org/10.1016/j.jnucmat.2010.07.003	journal	December 2010
Introduction to two-dimensional X-ray diffraction He, Bob Baoping Powder Diffraction, Vol. 18, Issue 2 https://doi.org/10.1154/1.1577355	journal	June 2003
Load partitioning between ferrite and cementite during elasto-plastic deformation of an ultrahigh-carbon steel Young, M. L.; Almer, J. D.; Daymond, M. R. Acta Materialia, Vol. 55, Issue 6 https://doi.org/10.1016/j.actamat.2006.11.004	journal	April 2007
Load Partitioning and Strain-Induced Martensite Formation during Tensile Loading of a Metastable Austenitic Stainless Steel Hedström, P.; Lindgren, L. E.; Almer, J. Metallurgical and Materials Transactions A, Vol. 40, Issue 5 https://doi.org/10.1007/s11661-009-9807-3	journal	March 2009
An assessment of the contributing factors to the superior properties of a nanostructured steel using in situ high-energy X-ray diffraction Cheng, S.; Wang, Y. D.; Choo, H. Acta Materialia, Vol. 58, Issue 7 https://doi.org/10.1016/j.actamat.2009.12.028	journal	April 2010
The determination of the elastic field of an ellipsoidal inclusion, and related problems Eshelby, John Douglas Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, Vol. 241, Issue 1226, p. 376-396 https://doi.org/10.1098/rspa.1957.0133	journal	August 1957
Temperature-dependent elastic anisotropy and mesoscale deformation in a nanostructured ferritic alloy Stoica, G. M.; Stoica, A. D.; Miller, M. K. Nature Communications, Vol. 5, Issue 1 https://doi.org/10.1038/ncomms6178	journal	October 2014
In situ generation of intergranular strains in an Al7050 alloy Pang, J. W. L.; Holden, T. M.; Mason, T. E. Acta Materialia, Vol. 46, Issue 5 https://doi.org/10.1016/S1359-6454(97)00369-8	journal	March 1998
Intergranular stresses in ZIRCALOY-2 Holden, T. M.; Pang, J. W. L.; Holt, R. A. Metallurgical and Materials Transactions A, Vol. 33, Issue 3 https://doi.org/10.1007/s11661-002-0141-2	journal	March 2002
Measured and predicted intergranular strains in textured austenitic steel Daymond, M. R.; Tomé, C. N.; Bourke, M. A. M. Acta Materialia, Vol. 48, Issue 2 https://doi.org/10.1016/S1359-6454(99)00354-7	journal	January 2000
The evolution of internal stress and dislocation during tensile deformation in a 9Cr ferritic/martensitic (F/M) ODS steel investigated by high-energy X-rays Zhang, Guangming; Zhou, Zhangjian; Mo, Kun Journal of Nuclear Materials, Vol. 467 https://doi.org/10.1016/j.jnucmat.2015.09.014	journal	December 2015
The determination of a continuum mechanics equivalent elastic strain from the analysis of multiple diffraction peaks Daymond, Mark R. Journal of Applied Physics, Vol. 96, Issue 8 https://doi.org/10.1063/1.1794896	journal	October 2004

Cited By (1)

Correlation of Materials Property and Performance with Internal Structures Evolvement Revealed by Laboratory X-ray Tomography Zhang, Lei; Wang, Shaogang Materials, Vol. 11, Issue 10 https://doi.org/10.3390/ma11101795	journal	September 2018

Similar Records

Temperature effect of elastic anisotropy and internal strain development in advanced nanostructured alloys: An in-situ synchrotron X-ray investigation

Journal Article · Sun Mar 19 00:00:00 EDT 2017 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1373890

Gan, Yingye; Mo, Kun; Yun, Di; +8 more

Temperature-dependent elastic anisotropy and mesoscale deformation in a nanostructured ferritic alloy

Journal Article · Fri Oct 10 00:00:00 EDT 2014 · Nature Communications · OSTI ID:1373890

Stoica, G. M.; Stoica, A. D.; Miller, M. K.; +1 more

In Situ Synchrotron Tensile Investigations on 14YWT, MA957 and 9-Cr ODS Alloys

Conference · Fri Jan 01 00:00:00 EST 2016 · OSTI ID:1373890

Lin, Jun-Li; Mo, Kun; Yun, Di; +10 more

Title: Temperature effect of elastic anisotropy and internal strain development in advanced nanostructured alloys: An in-situ synchrotron X-ray investigation

Citation Formats

References (49)

Cited By (1)

Similar Records

Related Subjects