skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Fast Printing and In Situ Morphology Observation of Organic Photovoltaics Using Slot-Die Coating

Authors:
 [1];  [2];  [3];  [3];  [4];  [4];  [3];  [1]
  1. Department of Polymer Science and Engineering, University of Massachusetts, Amherst MA 01003 USA; Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley CA 94720 USA
  2. Department of Polymer Science and Engineering, University of Massachusetts, Amherst MA 01003 USA
  3. Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley CA 94720 USA
  4. Jema Science Inc, Berkeley California 94720 USA
Publication Date:
Research Org.:
Energy Frontier Research Centers (EFRC) (United States). Polymer-Based Materials for Harvesting Solar Energy (PHaSE)
Sponsoring Org.:
USDOE Office of Science (SC), Basic Energy Sciences (BES) (SC-22)
OSTI Identifier:
1370266
DOE Contract Number:  
SC0001087
Resource Type:
Journal Article
Journal Name:
Advanced Materials
Additional Journal Information:
Journal Volume: 27; Journal Issue: 5; Related Information: PHaSE partners with University of Massachusetts, Amherst (lead) and Lowell; Oak Ridge National Laboratory; Pennsylvania State University; Renssalaer Polytechnic Institute; University of Pittsburgh; Journal ID: ISSN 0935-9648
Publisher:
Wiley
Country of Publication:
United States
Language:
English

Citation Formats

Liu, Feng, Ferdous, Sunzida, Schaible, Eric, Hexemer, Alexander, Church, Matthew, Ding, Xiaodong, Wang, Cheng, and Russell, Thomas P. Fast Printing and In Situ Morphology Observation of Organic Photovoltaics Using Slot-Die Coating. United States: N. p., 2014. Web. doi:10.1002/adma.201404040.
Liu, Feng, Ferdous, Sunzida, Schaible, Eric, Hexemer, Alexander, Church, Matthew, Ding, Xiaodong, Wang, Cheng, & Russell, Thomas P. Fast Printing and In Situ Morphology Observation of Organic Photovoltaics Using Slot-Die Coating. United States. doi:10.1002/adma.201404040.
Liu, Feng, Ferdous, Sunzida, Schaible, Eric, Hexemer, Alexander, Church, Matthew, Ding, Xiaodong, Wang, Cheng, and Russell, Thomas P. Fri . "Fast Printing and In Situ Morphology Observation of Organic Photovoltaics Using Slot-Die Coating". United States. doi:10.1002/adma.201404040.
@article{osti_1370266,
title = {Fast Printing and In Situ Morphology Observation of Organic Photovoltaics Using Slot-Die Coating},
author = {Liu, Feng and Ferdous, Sunzida and Schaible, Eric and Hexemer, Alexander and Church, Matthew and Ding, Xiaodong and Wang, Cheng and Russell, Thomas P.},
abstractNote = {},
doi = {10.1002/adma.201404040},
journal = {Advanced Materials},
issn = {0935-9648},
number = 5,
volume = 27,
place = {United States},
year = {2014},
month = {12}
}

Works referenced in this record:

A Mechanistic Understanding of Processing Additive-Induced Efficiency Enhancement in Bulk Heterojunction Organic Solar Cells
journal, October 2013

  • Schmidt, Kristin; Tassone, Christopher J.; Niskala, Jeremy R.
  • Advanced Materials, Vol. 26, Issue 2
  • DOI: 10.1002/adma.201303622

Polymer-Fullerene Bulk-Heterojunction Solar Cells
journal, August 2010

  • Brabec, Christoph J.; Gowrisanker, Srinivas; Halls, Jonathan J. M.
  • Advanced Materials, Vol. 22, Issue 34
  • DOI: 10.1002/adma.200903697

The OE-A OPV demonstrator anno domini 2011
journal, January 2011

  • Krebs, Frederik C.; Fyenbo, Jan; Tanenbaum, David M.
  • Energy & Environmental Science, Vol. 4, Issue 10
  • DOI: 10.1039/c1ee01891d

Effects of Additives on the Morphology of Solution Phase Aggregates Formed by Active Layer Components of High-Efficiency Organic Solar Cells
journal, December 2011

  • Lou, Sylvia J.; Szarko, Jodi M.; Xu, Tao
  • Journal of the American Chemical Society, Vol. 133, Issue 51
  • DOI: 10.1021/ja2085564

Origin of the scattering peak in microemulsions
journal, September 1987

  • Teubner, M.; Strey, R.
  • The Journal of Chemical Physics, Vol. 87, Issue 5
  • DOI: 10.1063/1.453006

Time-Resolved Structural Evolution of Additive-Processed Bulk Heterojunction Solar Cells
journal, February 2012

  • Rogers, James T.; Schmidt, Kristin; Toney, Michael F.
  • Journal of the American Chemical Society, Vol. 134, Issue 6
  • DOI: 10.1021/ja2104747

Characterization of the morphology of solution-processed bulk heterojunction organic photovoltaics
journal, December 2013


Efficient Polymer Solar Cells Based on a Low Bandgap Semi-crystalline DPP Polymer-PCBM Blends
journal, June 2012


Relating Chemical Structure to Device Performance via Morphology Control in Diketopyrrolopyrrole-Based Low Band Gap Polymers
journal, December 2013

  • Liu, Feng; Wang, Cheng; Baral, Jayanta K.
  • Journal of the American Chemical Society, Vol. 135, Issue 51
  • DOI: 10.1021/ja408923y

Roll-to-roll fabrication of polymer solar cells
journal, January 2012


Effect of Processing Additives on the Solidification of Blade-Coated Polymer/Fullerene Blend Films via In-Situ Structure Measurements
journal, April 2013

  • Shin, Nayool; Richter, Lee J.; Herzing, Andrew A.
  • Advanced Energy Materials, Vol. 3, Issue 7
  • DOI: 10.1002/aenm.201201027

Simultaneous Use of Small‐ and Wide‐Angle X‐ray Techniques to Analyze Nanometerscale Phase Separation in Polymer Heterojunction Solar Cells
journal, July 2008

  • Chiu, Mao‐Yuan; Jeng, U‐Ser; Su, Chiu‐Hun
  • Advanced Materials, Vol. 20, Issue 13
  • DOI: 10.1002/adma.200703097

Conjugated Polymer-Based Organic Solar Cells
journal, April 2007

  • Günes, Serap; Neugebauer, Helmut; Sariciftci, Niyazi Serdar
  • Chemical Reviews, Vol. 107, Issue 4, p. 1324-1338
  • DOI: 10.1021/cr050149z

The development of nanoscale morphology in polymer:fullerene photovoltaic blends during solvent casting
journal, January 2010

  • Wang, Tao; Dunbar, Alan D. F.; Staniec, Paul A.
  • Soft Matter, Vol. 6, Issue 17
  • DOI: 10.1039/c0sm00343c

Polymer–Fullerene Composite Solar Cells
journal, January 2008

  • Thompson, Barry C.; Fréchet, Jean M. J.
  • Angewandte Chemie International Edition, Vol. 47, Issue 1, p. 58-77
  • DOI: 10.1002/anie.200702506

Effect of Photovoltaic Polymer/Fullerene Blend Composition Ratio on Microstructure Evolution during Film Solidification Investigated in Real Time by X-ray Diffraction
journal, May 2011

  • Sanyal, Monamie; Schmidt-Hansberg, Benjamin; Klein, Michael F. G.
  • Macromolecules, Vol. 44, Issue 10
  • DOI: 10.1021/ma2000338

Processing Additives for Improved Efficiency from Bulk Heterojunction Solar Cells
journal, March 2008

  • Lee, Jae Kwan; Ma, Wan Li; Brabec, Christoph J.
  • Journal of the American Chemical Society, Vol. 130, Issue 11
  • DOI: 10.1021/ja710079w

Defining the Nanostructured Morphology of Triblock Copolymers Using Resonant Soft X-ray Scattering
journal, September 2011

  • Wang, Cheng; Lee, Dong Hyun; Hexemer, Alexander
  • Nano Letters, Vol. 11, Issue 9
  • DOI: 10.1021/nl2020526

On the morphology of polymer-based photovoltaics
journal, March 2012

  • Liu, Feng; Gu, Yu; Jung, Jae Woong
  • Journal of Polymer Science Part B: Polymer Physics, Vol. 50, Issue 15
  • DOI: 10.1002/polb.23063

In Situ X-Ray Study of Drying-Temperature Influence on the Structural Evolution of Bulk-Heterojunction Polymer-Fullerene Solar Cells Processed by Doctor-Blading
journal, April 2011

  • Sanyal, Monamie; Schmidt-Hansberg, Benjamin; Klein, Michael F. G.
  • Advanced Energy Materials, Vol. 1, Issue 3
  • DOI: 10.1002/aenm.201100007

Multi-Length-Scale Morphologies in PCPDTBT/PCBM Bulk-Heterojunction Solar Cells
journal, April 2012

  • Gu, Yu; Wang, Cheng; Russell, Thomas P.
  • Advanced Energy Materials, Vol. 2, Issue 6
  • DOI: 10.1002/aenm.201100726

Moving through the Phase Diagram: Morphology Formation in Solution Cast Polymer–Fullerene Blend Films for Organic Solar Cells
journal, October 2011

  • Schmidt-Hansberg, Benjamin; Sanyal, Monamie; Klein, Michael F. G.
  • ACS Nano, Vol. 5, Issue 11
  • DOI: 10.1021/nn2036279

A polymer tandem solar cell with 10.6% power conversion efficiency
journal, February 2013

  • You, Jingbi; Dou, Letian; Yoshimura, Ken
  • Nature Communications, Vol. 4, Issue 1
  • DOI: 10.1038/ncomms2411

Predicting Morphologies of Solution Processed Polymer:Fullerene Blends
journal, July 2013

  • Kouijzer, Sandra; Michels, Jasper J.; van den Berg, Mauricio
  • Journal of the American Chemical Society, Vol. 135, Issue 32
  • DOI: 10.1021/ja405493j

Upscaling of polymer solar cell fabrication using full roll-to-roll processing
journal, January 2010

  • Krebs, Frederik C.; Tromholt, Thomas; Jørgensen, Mikkel
  • Nanoscale, Vol. 2, Issue 6
  • DOI: 10.1039/b9nr00430k

A new Guinier–Porod model
journal, May 2010


The role of dynamic measurements in correlating structure with optoelectronic properties in polymer : fullerene bulk-heterojunction solar cells
journal, January 2013