skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Metallurgical studies with the HIPPO diffractometer at LANSCE

Authors:
; ; ; ;
Publication Date:
Research Org.:
Energy Frontier Research Centers (EFRC) (United States). Center for Materials at Irradiation and Mechanical Extremes (CMIME)
Sponsoring Org.:
USDOE Office of Science (SC), Basic Energy Sciences (BES) (SC-22)
OSTI Identifier:
1369963
DOE Contract Number:  
2008LANL1026
Resource Type:
Journal Article
Journal Name:
Canadian Metallurgical Quarterly
Additional Journal Information:
Journal Volume: 54; Journal Issue: 1; Related Information: CMIME partners with Los Alamos National Laboratory (lead); Carnegie Mellon University; University of Illinois, Urbana Champaign; Massachusetts Institute of Technology; University of Nebraska; Journal ID: ISSN 0008-4433
Country of Publication:
United States
Language:
English

Citation Formats

Reiche, H. M., Carpenter, J. S., Stein, F., Tomida, T., and Vogel, S. C. Metallurgical studies with the HIPPO diffractometer at LANSCE. United States: N. p., 2014. Web. doi:10.1179/1879139514y.0000000157.
Reiche, H. M., Carpenter, J. S., Stein, F., Tomida, T., & Vogel, S. C. Metallurgical studies with the HIPPO diffractometer at LANSCE. United States. doi:10.1179/1879139514y.0000000157.
Reiche, H. M., Carpenter, J. S., Stein, F., Tomida, T., and Vogel, S. C. Fri . "Metallurgical studies with the HIPPO diffractometer at LANSCE". United States. doi:10.1179/1879139514y.0000000157.
@article{osti_1369963,
title = {Metallurgical studies with the HIPPO diffractometer at LANSCE},
author = {Reiche, H. M. and Carpenter, J. S. and Stein, F. and Tomida, T. and Vogel, S. C.},
abstractNote = {},
doi = {10.1179/1879139514y.0000000157},
journal = {Canadian Metallurgical Quarterly},
issn = {0008-4433},
number = 1,
volume = 54,
place = {United States},
year = {2014},
month = {9}
}

Works referenced in this record:

über die Legierungen des Aluminiums mit Kupfer, Eisen, Nickel, Kobalt, Blei und Cadmium
journal, February 1908


Design of Radiation Tolerant Materials Via Interface Engineering
journal, September 2013

  • Han, Weizhong; Demkowicz, Michael J.; Mara, Nathan A.
  • Advanced Materials, Vol. 25, Issue 48
  • DOI: 10.1002/adma.201303400

Bulk texture evolution of Cu–Nb nanolamellar composites during accumulative roll bonding
journal, February 2012


Structure–Property–Functionality of Bimetal Interfaces
journal, September 2012


Investigation of the ε phase in the Fe–Al system by high-temperature neutron diffraction
journal, April 2010


SALSA—A new instrument for strain imaging in engineering materials and components
journal, November 2006

  • Pirling, Thilo; Bruno, Giovanni; Withers, Philip J.
  • Materials Science and Engineering: A, Vol. 437, Issue 1
  • DOI: 10.1016/j.msea.2006.04.083

�ber den Mechanismus der Stahlh�rtung
journal, May 1930

  • Kurdjumow, G.; Sachs, G.
  • Zeitschrift f�r Physik, Vol. 64, Issue 5-6
  • DOI: 10.1007/BF01397346

Measurement of neutron beam characteristics at the Manuel Lujan Jr. neutron scattering center
journal, June 2004

  • Ino, Takashi; Ooi, Motoki; Kiyanagi, Yoshiaki
  • Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 525, Issue 3
  • DOI: 10.1016/j.nima.2004.02.003

Phase equilibria in the Fe–Al–Mo system – Part II: Isothermal sections at 1000 and 1150°C
journal, June 2008


Thermal stability of Cu–Nb nanolamellar composites fabricated via accumulative roll bonding
journal, March 2013


Memory effects of transformation textures in steel and its prediction by the double Kurdjumov–Sachs relation
journal, May 2013


Interface-driven microstructure development and ultra high strength of bulk nanostructured Cu-Nb multilayers fabricated by severe plastic deformation
journal, April 2013

  • Beyerlein, Irene J.; Mara, Nathan A.; Carpenter, John S.
  • Journal of Materials Research, Vol. 28, Issue 13
  • DOI: 10.1557/jmr.2013.21

A furnace with rotating load frame for in situ high temperature deformation and creep experiments in a neutron diffraction beam line
journal, May 2012

  • Reiche, H. M.; Vogel, S. C.; Mosbrucker, P.
  • Review of Scientific Instruments, Vol. 83, Issue 5
  • DOI: 10.1063/1.4708619

The Al–Cr–Fe system–Phases and phase equilibria in the Al-rich corner
journal, May 1997


Texture measurements using the new neutron diffractometer HIPPO and their analysis using the Rietveld method
journal, March 2004

  • Vogel, Sven C.; Hartig, Christian; Lutterotti, Luca
  • Powder Diffraction, Vol. 19, Issue 1
  • DOI: 10.1154/1.1649961

VULCAN—The engineering diffractometer at the SNS
journal, November 2006


Constitution and magnetic properties of iron-rich iron-aluminum alloys
journal, July 1958


Current Status of Engineering Materials Diffractometer at J-PARC
journal, March 2011


A Re-Examination of the Liquidus Surface of the Al–Fe–Ti System
journal, April 2003

  • Ducher, R.; Stein, F.; Viguier, B.
  • Zeitschrift für Metallkunde, Vol. 94, Issue 4
  • DOI: 10.3139/146.030396

Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process
journal, January 1999


SMARTS - a spectrometer for strain measurement in engineering materials
journal, December 2002

  • Bourke, M. A. M.; Dunand, D. C.; Ustundag, E.
  • Applied Physics A: Materials Science & Processing, Vol. 74, Issue 0
  • DOI: 10.1007/s003390201747

ENGIN-X: a third-generation neutron strain scanner
journal, November 2006

  • Santisteban, J. R.; Daymond, M. R.; James, J. A.
  • Journal of Applied Crystallography, Vol. 39, Issue 6
  • DOI: 10.1107/S0021889806042245

Determination of the crystal structure of the ɛ phase in the Fe–Al system by high-temperature neutron diffraction
journal, January 2010


The Los Alamos Neutron Science Center
journal, June 2006

  • Lisowski, Paul W.; Schoenberg, Kurt F.
  • Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 562, Issue 2
  • DOI: 10.1016/j.nima.2006.02.178

High-strength and thermally stable bulk nanolayered composites due to twin-induced interfaces
journal, April 2013

  • Zheng, Shijian; Beyerlein, Irene J.; Carpenter, John S.
  • Nature Communications, Vol. 4, Issue 1
  • DOI: 10.1038/ncomms2651

Rietveld texture analysis from TOF neutron diffraction data
journal, September 2010

  • Wenk, H. -R.; Lutterotti, L.; Vogel, S. C.
  • Powder Diffraction, Vol. 25, Issue 3
  • DOI: 10.1154/1.3479004

Processing Parameter Influence on Texture and Microstructural Evolution in Cu-Nb Multilayer Composites Fabricated via Accumulative Roll Bonding
journal, January 2014

  • Carpenter, John S.; McCabe, Rodney J.; Zheng, Shijian J.
  • Metallurgical and Materials Transactions A, Vol. 45, Issue 4
  • DOI: 10.1007/s11661-013-2162-4

Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process
journal, October 1998


Neutron Production, Neutron Facilities and Neutron Instrumentation
journal, January 2006

  • Vogel, S. C.; Priesmeyer, H. -G.
  • Reviews in Mineralogy and Geochemistry, Vol. 63, Issue 1
  • DOI: 10.2138/rmg.2006.63.2

Engineering Interface Structures and Thermal Stabilities via SPD Processing in Bulk Nanostructured Metals
journal, February 2014

  • Zheng, Shijian; Carpenter, John S.; McCabe, Rodney J.
  • Scientific Reports, Vol. 4, Issue 1
  • DOI: 10.1038/srep04226