skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Culminating Project: Building 858 North (Silicon Fabrication Facility - SiFab).


Abstract not provided.

Publication Date:
Research Org.:
Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
Sponsoring Org.:
USDOE National Nuclear Security Administration (NNSA)
OSTI Identifier:
Report Number(s):
DOE Contract Number:
Resource Type:
Country of Publication:
United States

Citation Formats

Garcia, Daniel M. Culminating Project: Building 858 North (Silicon Fabrication Facility - SiFab).. United States: N. p., 2017. Web.
Garcia, Daniel M. Culminating Project: Building 858 North (Silicon Fabrication Facility - SiFab).. United States.
Garcia, Daniel M. 2017. "Culminating Project: Building 858 North (Silicon Fabrication Facility - SiFab).". United States. doi:.
title = {Culminating Project: Building 858 North (Silicon Fabrication Facility - SiFab).},
author = {Garcia, Daniel M.},
abstractNote = {Abstract not provided.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = 2017,
month = 6

Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this thesis or dissertation.

Save / Share:
  • A new thin-film silicon solar cell is designed and fabricated. The design incorporates optical confinement (due to light trapping in the thin silicon layers) and surface passivation. These features can lead to high conversion efficiency in unconventionally thin structures. A novel fabrication process based on metallic solution growth of silicon is used to produce experimental devices. A silicon substrate is textured and coated with an oxide film. Microscopic holes are etched in the oxide film, which serve as sites of selective nucleation upon contact with a supersaturated silicon/metal liquid solution. Subsequent lateral overgrowth results in a continuous single-crystal film ofmore » silicon formed over the oxide. A second silicon film is deposited over the first to form a p-n junction solar cell. The oxide interface acts as a (Lambertian) diffuse back reflector of photons for optical confinement and also provides a degree of back-surface passivation. Because the substrate is not an active part of the device, it can be of low quality for reduced cost. This approach thus combines the high efficiency and stability inherent in crystalline silicon devices with the low cost associated with thin-film deposition on inexpensive substrates. A detailed analysis and computer-based model of device performance is given.« less
  • The fabrication of MIS solar cells with nitrided insulator films is described. A technique for low temperature growth of the insulator film by direct nitridation in active nitrogen generated by electric discharge is presented. This film is found to be very smooth and its thickness is nearly independent of the active nitrogen exposure time. Cell performance is a strong function of exposure time and a film densification growth mechanism is proposed. The nitrided cells have been empirically optimized for energy conversion performance and characterized according to Schottky barrier diode theory. Physical constants governing cell operation are obtained from current-voltage andmore » capacitance-voltage measurements. Active area conversion efficiencies are nominally 8 percent as compared to 6 1/2 percent nominal efficiency for similarly fabricated cells with thermally grown silicon oxide insulators. Quantum efficiencies under monochromatic illumination in the visible spectrum are shown to be higher than those of junction type cells. An improvement in insulator stability has been realized and the shelf life of the unprotected cells is in excess of 630 days witn no significant change in performance.« less
  • A new silicon ribbon casting process was developed at Source Technology Applied Metallurgicals, Inc. for use in the fabrication of low cost photovoltaic cells. This process, known as double roller quench casting, produces ribbon directly from silicon metal by pouring molten silicon into the nip of two counter-rotating chilled copper wheels. A polycrystalline silicon ribbon forms continuously and is later cut up to make individual solar cells. The ribbon material has a grain size of 50 to 400 microns. The grains are columnar and oriented perpendicular to the ribbon surface. Polishing and etching reveals a number of etch pits, whichmore » are believed to be caused by defects formed during rapid cooling of the material. The resistivity of the quench cast material is higher than the feedstock by a factor of 1.5 to 4. Low temperature mobility and resistivity measurements do not show the presence of grain boundary potential barriers. Reduced mobility of p-type material indicates a large number of scattering centers probably caused by the intra-grain defects. Solar cells fabricated on quench cast material have efficiencies as high as 8.7% under simulated AM1 spectrum. The minority carrier diffusion length as measured by spectral response was found to be on the order of 10 microns. An open circuit voltage of 484 mV was measured and is consistent with the diffusion length.« less