skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: EDS Containment Vessel TNT Equivalence Testing.

Abstract

Abstract not provided.

Authors:
; ;
Publication Date:
Research Org.:
Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sandia National Laboratories, Livermore, CA
Sponsoring Org.:
USDOE National Nuclear Security Administration (NNSA)
OSTI Identifier:
1367225
Report Number(s):
SAND2017-5208C
653365
DOE Contract Number:
AC04-94AL85000
Resource Type:
Conference
Resource Relation:
Conference: Proposed for presentation at the ASME-PVP 2017 held July 16-22, 2017 in Waikoloa, HA.
Country of Publication:
United States
Language:
English

Citation Formats

Stofleth, Jerome H., Haroldsen, Brent L., and Crocker, Robert W.. EDS Containment Vessel TNT Equivalence Testing.. United States: N. p., 2017. Web.
Stofleth, Jerome H., Haroldsen, Brent L., & Crocker, Robert W.. EDS Containment Vessel TNT Equivalence Testing.. United States.
Stofleth, Jerome H., Haroldsen, Brent L., and Crocker, Robert W.. 2017. "EDS Containment Vessel TNT Equivalence Testing.". United States. doi:. https://www.osti.gov/servlets/purl/1367225.
@article{osti_1367225,
title = {EDS Containment Vessel TNT Equivalence Testing.},
author = {Stofleth, Jerome H. and Haroldsen, Brent L. and Crocker, Robert W.},
abstractNote = {Abstract not provided.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = 2017,
month = 5
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:
  • Static overpressurization tests of two scale models of nuclear containment structures - a steel containment vessel (SCV) representative of an improved, boiling water reactor (BWR) Mark II design and a prestressed concrete containment vessel (PCCV) for pressurized water reactors (PWR) - are being conducted by Sandia National Laboratories for the Nuclear Power Engineering Corporation of Japan and the U.S. Nuclear Regulatory Commission. This paper discusses plans for instrumentation and testing of the PCCV model. 6 refs., 2 figs., 2 tabs.
  • A mixed-scale containment vessel model, with 1:10 in containment geometry and 1:4 in shell thickness, was fabricated to represent an improved, boiling water reactor (BWR) Mark II containment vessel. A contact structure, installed over the model and separated at a nominally uniform distance from it, provided a simplified representation of a reactor shield building in the actual plant. This paper describes the pretest preparations and the conduct of the high pressure test of the model performed on December 11-12, 1996. 4 refs., 2 figs.
  • Short-term toxicity tests with aquatic organisms are a valuable measurement tool in the assessment of the toxicity of effluents, environmental samples and single chemicals. Currently toxicity tests are utilized in a wide range of US EPA regulatory activities including effluent discharge compliance. In the current approach for determining the No Observed Effect Concentration, an effluent concentration is presumed safe if there is no statistically significant difference in toxicant response versus control response. The conclusion of a safe concentration may be due to the fact that it truly is safe, or alternatively, that the ability of the statistical test to detectmore » an effect, given its existence, is inadequate. Results of research of a new statistical approach, the basis of which is to move away from a demonstration of no difference to a demonstration of equivalence, will be discussed. The concept of observed confidence distributions, first suggested by Cox, is proposed as a measure of the strength of evidence for practically equivalent responses between a given effluent concentration and the control. The research included determination of intervals of practically equivalent responses as a function of the variability of control response. The approach is illustrated using reproductive data from tests with Ceriodaphnia dubia and survival and growth data from tests with fathead minnow. The data are from the US EPA`s National Reference Toxicant Database.« less
  • The possibility of achieving in-vessel core retention by flooding the reactor cavity, or the ``flooded cavity``, is an accident management concept currently under consideration for advanced light water reactors (ALWR), as well as for existing light water reactors (LWR). The CYBL (CYlindrical BoiLing) facility is a facility specifically designed to perform large-scale confirmatory testing of the flooded cavity concept. CYBL has a tank-within-a-tank design; the inner 3.7 m diameter tank simulates the reactor vessel, and the outer tank simulates the reactor cavity. The energy deposition on the bottom head is simulated with an array of radiant heaters. The array canmore » deliver a tailored heat flux distribution corresponding to that resulting from core melt convection. The present paper provides a detailed description of the capabilities of the facility, as well as results of recent experiments with heat flux in the range of interest to those required for in-vessel retention in typical ALWRs. The paper concludes with a discussion of other experiments for the flooded cavity applications.« less