Thermal Analysis of Disposal of High-Level Nuclear Waste in a Generic Bedded Salt repository using the Semi-Analytical Method.
Abstract
An example case is presented for testing analytical thermal models. The example case represents thermal analysis of a generic repository in bedded salt at 500 m depth. The analysis is part of the study reported in Matteo et al. (2016). Ambient average ground surface temperature of 15°C, and a natural geothermal gradient of 25°C/km, were assumed to calculate temperature at the near field. For generic salt repository concept crushed salt backfill is assumed. For the semi-analytical analysis crushed salt thermal conductivity of 0.57 W/m-K was used. With time the crushed salt is expected to consolidate into intact salt. In this study a backfill thermal conductivity of 3.2 W/m-K (same as intact) is used for sensitivity analysis. Decay heat data for SRS glass is given in Table 1. The rest of the parameter values are shown below. Results of peak temperatures at the waste package surface are given in Table 2.
- Authors:
-
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Publication Date:
- Research Org.:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Sponsoring Org.:
- USDOE Office of Nuclear Energy (NE), Fuel Cycle Technologies (NE-5)
- OSTI Identifier:
- 1367199
- Report Number(s):
- SAND-2017-5159R
653329
- DOE Contract Number:
- AC04-94AL85000
- Resource Type:
- Technical Report
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES
Citation Formats
Hadgu, Teklu, and Matteo, Edward N. Thermal Analysis of Disposal of High-Level Nuclear Waste in a Generic Bedded Salt repository using the Semi-Analytical Method.. United States: N. p., 2017.
Web. doi:10.2172/1367199.
Hadgu, Teklu, & Matteo, Edward N. Thermal Analysis of Disposal of High-Level Nuclear Waste in a Generic Bedded Salt repository using the Semi-Analytical Method.. United States. doi:10.2172/1367199.
Hadgu, Teklu, and Matteo, Edward N. Mon .
"Thermal Analysis of Disposal of High-Level Nuclear Waste in a Generic Bedded Salt repository using the Semi-Analytical Method.". United States.
doi:10.2172/1367199. https://www.osti.gov/servlets/purl/1367199.
@article{osti_1367199,
title = {Thermal Analysis of Disposal of High-Level Nuclear Waste in a Generic Bedded Salt repository using the Semi-Analytical Method.},
author = {Hadgu, Teklu and Matteo, Edward N.},
abstractNote = {An example case is presented for testing analytical thermal models. The example case represents thermal analysis of a generic repository in bedded salt at 500 m depth. The analysis is part of the study reported in Matteo et al. (2016). Ambient average ground surface temperature of 15°C, and a natural geothermal gradient of 25°C/km, were assumed to calculate temperature at the near field. For generic salt repository concept crushed salt backfill is assumed. For the semi-analytical analysis crushed salt thermal conductivity of 0.57 W/m-K was used. With time the crushed salt is expected to consolidate into intact salt. In this study a backfill thermal conductivity of 3.2 W/m-K (same as intact) is used for sensitivity analysis. Decay heat data for SRS glass is given in Table 1. The rest of the parameter values are shown below. Results of peak temperatures at the waste package surface are given in Table 2.},
doi = {10.2172/1367199},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Mon May 01 00:00:00 EDT 2017},
month = {Mon May 01 00:00:00 EDT 2017}
}
-
Measurements of solubilities and aqueous species related to the performance of a high-level nuclear waste repository in bedded salt: A test plan for technetium, radium, and iodine: Nuclear and Chemical Waste Program
A literature review program was carried out by several laboratories under the supervision of ONWI to determine the availability of published solubility data, in dilute solutions and in solutions of high ionic strength, and at temperatures ranging from room temperature to about 100/degree/C, for 17 elements. The test plan described below is based on the information obtained in the literature survey carried out for the elements technetium, radium, and iodine, In carrying out this literature survey and in formulating the test plan, it was recognized that thermodynamic data on solid radionuclide compounds and on the aqueous species in equilibrium withmore » -
Solubility issues related to the performance of a high-level nuclear waste repository in bedded salt: A survey of data needs for solubilities and aqueous species of technetium, radium, and iodine: Nuclear and Chemical Waste Program
A survey of the literature on the solubility and aqueous species of technetium, radium, and iodine was conducted, with special emphasis on salt repository brines. The elements reviewed here were three of a total of seventeen elements reviewed by participating laboratories. Comprehensive tables of solid compounds and aqueous species for each elements were screened according to a uniform set of procedures. Technetium solid compounds selected for further solubility studies in repository brines were TcO/sub 2//center dot/nH/sub 2/O, TcS/sub 2/, and Tc/sub 2/S/sub 7/. Aqueous species of interest were those associated with solubility measurements and complexing ligands such as phosphate andmore » -
Predicted temperatures in a bedded-salt repository resulting from burial of DOE high-level nuclear waste canisters
A 2-D thermal model is defined and used to calculate temperatures within support pillars of a bedded salt repository. The particular configuration considered includes DOE high-level waste canisters (producing 300 W each) buried three abreast below the floor of a 20-foot wide drift. A 3-D ''close-in'' thermal model is also defined and used to estimate the thermal response of bedded salt near the buried canisters. This model uses boundary conditions from the 2-D ''global'' model. -
Thermoelastic analysis of spent fuel and high level radioactive waste repositories in salt. A semi-analytical solution. [JUDITH]
An underground repository containing heat generating, High Level Waste or Spent Unreprocessed Fuel may be approximated as a finite number of heat sources distributed across the plane of the repository. The resulting temperature, displacement and stress changes may be calculated using analytical solutions, providing linear thermoelasticity is assumed. This report documents a computer program based on this approach and gives results that form the basis for a comparison between the effects of disposing of High Level Waste and Spent Unreprocessed Fuel.