Quantitative investigation into the influence of temperature on carbide and austenite evolution during partitioning of a quenched and partitioned steel

Pierce, Dean T.; Coughlin, D. R.; Williamson, Don L.; Kähkönen, Joonas; Clarke, A. J.; Clarke, Kester D.; Speer, J. G.; De Moor, Emmanuel

doi:10.1016/j.scriptamat.2016.04.027

Title: Quantitative investigation into the influence of temperature on carbide and austenite evolution during partitioning of a quenched and partitioned steel

Journal Article · Tue May 03 00:00:00 EDT 2016 · Scripta Materialia

DOI:https://doi.org/10.1016/j.scriptamat.2016.04.027· OSTI ID:1357998

Pierce, Dean T. ^[1]; Coughlin, D. R. ^[2]; Williamson, Don L. ^[3]; Kähkönen, Joonas ^[4]; Clarke, A. J. ^[2]; Clarke, Kester D. ^[2]; Speer, J. G. ^[4]; De Moor, Emmanuel ^[4]

Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division
Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
Colorado School of Mines, Golden, CO (United States). Department of Physics
Colorado School of Mines, Golden, CO (United States). Advanced Steel Processing and Products Research Center

Here, the influence of partitioning temperature on microstructural evolution during quenching and partitioning was investigated in a 0.38C-1.54Mn-1.48Si wt.% steel using Mössbauer spectroscopy and transmission electron microscopy. η-carbide formation occurs in the martensite during the quenching, holding, and partitioning steps. More effective carbon partitioning from martensite to austenite was observed at 450 than 400°C, resulting in lower martensite carbon contents, less carbide formation, and greater retained austenite amounts for short partitioning times. Conversely, greater austenite decomposition occurs at 450°C for longer partitioning times. Lastly, cementite forms during austenite decomposition and in the martensite for longer partitioning times at 450°C.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Energy Efficiency Office. Advanced Manufacturing Office

Grant/Contract Number:: AC05-00OR22725; EE0005765; AC52-06NA25396

OSTI ID:: 1357998

Alternate ID(s):: OSTI ID: 1337415

Journal Information:: Scripta Materialia, Vol. 121, Issue C; ISSN 1359-6462

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 50 works

Citation information provided by
Web of Science

References (29)

Carbon partitioning into austenite after martensite transformation Speer, J.; Matlock, D. K.; De Cooman, B. C. Acta Materialia, Vol. 51, Issue 9 https://doi.org/10.1016/S1359-6454(03)00059-4	journal	May 2003
Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation Speer, John G.; Edmonds, David V.; Rizzo, Fernando C. Current Opinion in Solid State and Materials Science, Vol. 8, Issue 3-4 https://doi.org/10.1016/j.cossms.2004.09.003	journal	June 2004
Analysis of Microstructure Evolution in Quenching and Partitioning Automotive Sheet Steel Speer, John G.; De Moor, E.; Findley, K. O. Metallurgical and Materials Transactions A, Vol. 42, Issue 12 https://doi.org/10.1007/s11661-011-0869-7	journal	September 2011
Carbon partitioning to austenite from martensite or bainite during the quench and partition (Q&P) process: A critical assessment Clarke, A. J.; Speer, J. G.; Miller, M. K. Acta Materialia, Vol. 56, Issue 1 https://doi.org/10.1016/j.actamat.2007.08.051	journal	January 2008
Atomic-scale analysis of carbon partitioning between martensite and austenite by atom probe tomography and correlative transmission electron microscopy Toji, Yuki; Matsuda, Hiroshi; Herbig, Michael Acta Materialia, Vol. 65 https://doi.org/10.1016/j.actamat.2013.10.064	journal	February 2014
Quenching and partitioning martensite—A novel steel heat treatment Edmonds, D. V.; He, K.; Rizzo, F. C. Materials Science and Engineering: A, Vol. 438-440 https://doi.org/10.1016/j.msea.2006.02.133	journal	November 2006
Dynamics of the Quenching and Partitioning (Q&P) Process Bigg, Timothy D.; Matlock, David K.; Speer, John G. Solid State Phenomena, Vol. 172-174 https://doi.org/10.4028/www.scientific.net/SSP.172-174.827	journal	June 2011
Influence of interface mobility on the evolution of austenite–martensite grain assemblies during annealing Santofimia, M. J.; Speer, J. G.; Clarke, A. J. Acta Materialia, Vol. 57, Issue 15 https://doi.org/10.1016/j.actamat.2009.06.024	journal	September 2009
In situ austenite–martensite interface mobility study during annealing De Knijf, Dorien; Santofimia, Maria J.; Shi, Hui Acta Materialia, Vol. 90 https://doi.org/10.1016/j.actamat.2015.02.040	journal	May 2015
Interaction of carbon partitioning, carbide precipitation and bainite formation during the Q&P process in a low C steel HajyAkbary, Farideh; Sietsma, Jilt; Miyamoto, Goro Acta Materialia, Vol. 104 https://doi.org/10.1016/j.actamat.2015.11.032	journal	February 2016
Atomic and nanoscale chemical and structural changes in quenched and tempered 4340 steel Clarke, A. J.; Miller, M. K.; Field, R. D. Acta Materialia, Vol. 77 https://doi.org/10.1016/j.actamat.2014.05.032	journal	September 2014
Characterization of transition carbides in quench and partitioned steel microstructures by Mössbauer spectroscopy and complementary techniques Pierce, D. T.; Coughlin, D. R.; Williamson, D. L. Acta Materialia, Vol. 90 https://doi.org/10.1016/j.actamat.2015.01.024	journal	May 2015
A study of the early stages of tempering in an Fe-1.2 Pct alloy Williamson, D. L.; Nakazawa, K.; Krauss, G. Metallurgical Transactions A, Vol. 10, Issue 9 https://doi.org/10.1007/BF02811991	journal	September 1979
Chi-Carbide in Tempered High Carbon Martensite Ma, C. B.; Ando, T.; Williamson, D. L. Metallurgical Transactions A, Vol. 14, Issue 5 https://doi.org/10.1007/BF02659852	journal	May 1983
Microstructural Features of 'Quenching and Partitioning': A New Martensitic Steel Heat Treatment Edmonds, D. V.; He, K.; Miller, Michael K. Materials Science Forum, Vol. 539-543 https://doi.org/10.4028/www.scientific.net/MSF.539-543.4819	journal	March 2007
A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels Koistinen, D. P.; Marburger, R. E. Acta Metallurgica, Vol. 7, Issue 1 https://doi.org/10.1016/0001-6160(59)90170-1	journal	January 1959
Bainite and martensite start temperature calculated with exponential carbon dependence van Bohemen, S. M. C. Materials Science and Technology, Vol. 28, Issue 4 https://doi.org/10.1179/1743284711Y.0000000097	journal	April 2012
Cems study of the carbon distribution in austenite Bauer, Ph.; Uwakweh, O. N. C.; Genin, J. M. R. Hyperfine Interactions, Vol. 41, Issue 1 https://doi.org/10.1007/BF02400451	journal	December 1988
Mössbauer study of the distribution of carbon interstitiels in iron alloys and the isochronal kinetics of the aging of martensite: The clustering-ordering synergy Uwakweh, O. N. C.; Bauer, J. Ph.; Génin, J. -M. R. Metallurgical Transactions A, Vol. 21, Issue 2 https://doi.org/10.1007/BF02671931	journal	February 1990
Local interactions in carbon-carbon and carbon-M (M: Al, Mn, Ni) atomic pairs in FCC gamma -iron Oda, K.; Fujimura, H.; Ino, H. Journal of Physics: Condensed Matter, Vol. 6, Issue 3 https://doi.org/10.1088/0953-8984/6/3/008	journal	January 1994
Characterization by Moessbauer spectroscopy of iron carbides formed by Fischer-Tropsch synthesis Le Caer, G.; Dubois, J. M.; Pijolat, M. The Journal of Physical Chemistry, Vol. 86, Issue 24 https://doi.org/10.1021/j100221a030	journal	November 1982
Carbon partitioning during quenching and partitioning heat treatment accompanied by carbide precipitation Toji, Yuki; Miyamoto, Goro; Raabe, Dierk Acta Materialia, Vol. 86 https://doi.org/10.1016/j.actamat.2014.11.049	journal	March 2015
Mössbauer study of iron carbides: Cementite (Fe, M)3C (M = Cr, Mn) with various manganese and chromium contents Schaaf, P.; Wiesen, S.; Gonser, U. Acta Metallurgica et Materialia, Vol. 40, Issue 2 https://doi.org/10.1016/0956-7151(92)90311-2	journal	February 1992
Substitutional solution of silicon in cementite: A first-principles study Jang, Jae Hoon; Kim, In Gee; Bhadeshia, H. K. D. H. Computational Materials Science, Vol. 44, Issue 4 https://doi.org/10.1016/j.commatsci.2008.08.022	journal	February 2009
A study of interstitial atom configuration in fresh and aged iron-carbon martensite by mossbauer spectroscopy Ino, Hiromitsu; Ito, Tsunenori; Nasu, Saburo Acta Metallurgica, Vol. 30, Issue 1 https://doi.org/10.1016/0001-6160(82)90039-6	journal	January 1982
Etude par spectrométrie Mössbauer des carbures de Fer Fe3C et Fe5C2 Le Caer, G.; Dubois, J. M.; Senateur, J. P. Journal of Solid State Chemistry, Vol. 19, Issue 1 https://doi.org/10.1016/0022-4596(76)90145-6	journal	September 1976
Phases in Quenched and Tempered Steels Imai, Y\={u.}noshin Transactions of the Japan Institute of Metals, Vol. 16, Issue 12 https://doi.org/10.2320/matertrans1960.16.721	journal	January 1975
Structure of Iron-Carbon Martensite in the Transition State from the First to the Third Stage of Tempering Studied by Electron Microscopy and Diffraction Nakamura, Yoshio; Nagakura, Sigemaro Transactions of the Japan Institute of Metals, Vol. 27, Issue 11 https://doi.org/10.2320/matertrans1960.27.842	journal	January 1986
Effect of partitioning of Mn and Si on the growth kinetics of cementite in tempered Fe–0.6 mass% C martensite Miyamoto, G.; Oh, J.; Hono, K. Acta Materialia, Vol. 55, Issue 15 https://doi.org/10.1016/j.actamat.2007.05.023	journal	September 2007

Cited By (9)

High-strength steel components produced by hot metal gas forming Jirková, Hana; Jeníček, Štěpán; Kučerová, Ludmila Materials Science and Technology https://doi.org/10.1080/02670836.2019.1576355	journal	February 2019
Evolution of Microstructure in a Low-Si Micro-alloyed Steel Processed Through One-Step Quenching and Partitioning Bansal, G. K.; Pradeep, M.; Ghosh, Chiradeep Metallurgical and Materials Transactions A, Vol. 50, Issue 2 https://doi.org/10.1007/s11661-018-5039-8	journal	December 2018
Microstructure Evolution and Competitive Reactions during Quenching and Partitioning of a Model Fe–C–Mn–Si Alloy Aoued, Samy; Danoix, Frédéric; Allain, Sébastien Y. P. Metals, Vol. 10, Issue 1 https://doi.org/10.3390/met10010137	journal	January 2020
A Dilatometric Study of Tempering Complemented by Mössbauer Spectroscopy and other Characterization Techniques Vieira, I.; Klemm-Toole, J.; Buchner, E. Scientific Reports, Vol. 7, Issue 1 https://doi.org/10.1038/s41598-017-17654-x	journal	December 2017
Analysis of interface migration and isothermal martensite formation for quenching and partitioning process in a low-carbon steel by phase field modeling Zhang, Xing; Shen, Gang; Li, Chuanwei Modelling and Simulation in Materials Science and Engineering, Vol. 27, Issue 7 https://doi.org/10.1088/1361-651x/ab3608	journal	August 2019
The Role of Transformation-Induced Plasticity in the Development of Advanced High Strength Steels Liu, Li; He, Binbin; Huang, Mingxin Advanced Engineering Materials, Vol. 20, Issue 6 https://doi.org/10.1002/adem.201701083	journal	March 2018
Determination of Mode Switching in Cyclic Partial Phase Transformation in Fe-0.1C-xMn Alloys as a Function of the Mn Concentration Farahani, Hussein; Xu, Wei; van der Zwaag, Sybrand JOM, Vol. 71, Issue 4 https://doi.org/10.1007/s11837-018-03323-5	journal	January 2019
Microstructure Evolution and Competitive Reactions during Quenching and Partitioning of a Model Fe–C–Mn–Si Alloy Aoued, Samy; Danoix, Frédéric; Allain, Sebastien Y. P. Deutsches Elektronen-Synchrotron, DESY, Hamburg https://doi.org/10.3204/pubdb-2020-00896	text	January 2020
In Situ Investigation of the Iron Carbide Precipitation Process in a Fe-C-Mn-Si Q&P Steel Allain, Sebastien Y. P.; Aoued, Samy; Quintin-Poulon, Angéline Deutsches Elektronen-Synchrotron, DESY, Hamburg https://doi.org/10.3204/pubdb-2019-01162	text	January 2018

Similar Records

Characterization of transition carbides in quench and partitioned steel microstructures by Mössbauer spectroscopy and complementary techniques

Journal Article · Fri May 01 00:00:00 EDT 2015 · Acta Materialia · OSTI ID:1357998

Pierce, D. T.; Coughlin, D. R.; Williamson, D. L.; +4 more

Microstructural evolution during quenching and partitioning of 0.2C-1.5Mn-1.3Si steels with Cr or Ni additions

Journal Article · Thu Mar 08 00:00:00 EST 2018 · Acta Materialia · OSTI ID:1357998

Pierce, Dean T.; Coughlin, D. R.; Clarke, Kester D.; +7 more

Limiting Retained Austenite Decomposition in Quenched and Tempered Steels: Influences of Rapid Tempering and Silicon

Journal Article · Tue Dec 15 00:00:00 EST 2020 · ISIJ International · OSTI ID:1357998

Euser, Virginia Katherine; Williamson, Don Lee; Clarke, Amy Jean; +1 more

Related Subjects

36 MATERIALS SCIENCE
Quenching and partitioning
Transition carbides
M ssbauer spectroscopy
Retained austenite
Cementite

Title: Quantitative investigation into the influence of temperature on carbide and austenite evolution during partitioning of a quenched and partitioned steel

Citation Formats

References (29)

Cited By (9)

Similar Records

Related Subjects