skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Data Validation Package May 2016 Groundwater Sampling at the Sherwood, Washington, Disposal Site August 2016

Abstract

The 2001 Long-Term Surveillance Plan (LTSP) for the US. Department of Energy Sherwood Project (UMI'RCA Title II) Reclamation Cell, Wellpinit, Washington, does not require groundwater compliance monitoring at the Sherwood site. However, the LTSP stipulates limited groundwater monitoring for chloride and sulfate (designated indicator parameters) and total dissolved solids (TDS) as a best management practice. Samples were collected from the background well, MW-2B, and the two downgradient wells, MW-4 and MW-10, in accordance with the LTSP. Sampling and analyses were conducted as specified in the Sampling and Analysis Plan for US. Department of Energy Office of Legacy Management Sites (LMS/PRO/S04351, continually updated). Water levels were measured in all wells prior to sampling and in four piezometers completed in the tailings dam. Time-concentration graphs included in this report indicate that the chloride, sulfate, and TDS concentrations are consistent with historical measurements. The concentrations of chloride and sulfate are well below the State of Washington water quality criteria value of 250 milligrams per liter (mg/L) for both parameters.

Authors:
 [1];  [2]
  1. USDOE Office of Legacy Management, Washington, DC (United States)
  2. Navarro Research and Engineering, Inc., Oak Ridge, TN (United States)
Publication Date:
Research Org.:
USDOE Office of Legacy Management, Washington, DC (United States)
Sponsoring Org.:
USDOE Office of Legacy Management (LM), Office of Site Operations (LM-20)
OSTI Identifier:
1351829
Report Number(s):
S00516
DOE Contract Number:  
LM0000421
Resource Type:
Technical Report
Country of Publication:
United States
Language:
English
Subject:
54 ENVIRONMENTAL SCIENCES; 2016 Groundwater Sampling Sherwood, Washington

Citation Formats

Kreie, Ken, and Traub, David. Data Validation Package May 2016 Groundwater Sampling at the Sherwood, Washington, Disposal Site August 2016. United States: N. p., 2016. Web. doi:10.2172/1351829.
Kreie, Ken, & Traub, David. Data Validation Package May 2016 Groundwater Sampling at the Sherwood, Washington, Disposal Site August 2016. United States. doi:10.2172/1351829.
Kreie, Ken, and Traub, David. Thu . "Data Validation Package May 2016 Groundwater Sampling at the Sherwood, Washington, Disposal Site August 2016". United States. doi:10.2172/1351829. https://www.osti.gov/servlets/purl/1351829.
@article{osti_1351829,
title = {Data Validation Package May 2016 Groundwater Sampling at the Sherwood, Washington, Disposal Site August 2016},
author = {Kreie, Ken and Traub, David},
abstractNote = {The 2001 Long-Term Surveillance Plan (LTSP) for the US. Department of Energy Sherwood Project (UMI'RCA Title II) Reclamation Cell, Wellpinit, Washington, does not require groundwater compliance monitoring at the Sherwood site. However, the LTSP stipulates limited groundwater monitoring for chloride and sulfate (designated indicator parameters) and total dissolved solids (TDS) as a best management practice. Samples were collected from the background well, MW-2B, and the two downgradient wells, MW-4 and MW-10, in accordance with the LTSP. Sampling and analyses were conducted as specified in the Sampling and Analysis Plan for US. Department of Energy Office of Legacy Management Sites (LMS/PRO/S04351, continually updated). Water levels were measured in all wells prior to sampling and in four piezometers completed in the tailings dam. Time-concentration graphs included in this report indicate that the chloride, sulfate, and TDS concentrations are consistent with historical measurements. The concentrations of chloride and sulfate are well below the State of Washington water quality criteria value of 250 milligrams per liter (mg/L) for both parameters.},
doi = {10.2172/1351829},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Thu Aug 04 00:00:00 EDT 2016},
month = {Thu Aug 04 00:00:00 EDT 2016}
}

Technical Report:

Save / Share: