skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Data Validation Package May 2016 Groundwater Sampling at the Lakeview, Oregon, Processing Site August 2016

Abstract

This biennial event includes sampling five groundwater locations (four monitoring wells and one domestic well) at the Lakeview, Oregon, Processing Site. For this event, the domestic well (location 0543) could not be sampled because no one was in residence during the sampling event (Note: notification was provided to the resident prior to the event). Per Appendix A of the Groundwater Compliance Action Plan, sampling is conducted to monitor groundwater quality on a voluntary basis. Sampling and analyses were conducted as specified in the Sampling and Analysis Plan for U.S. Department of Energy Office of Legacy Management Sites (LMS/PRO/S04351, continually updated). One duplicate sample was collected from location 0505. Water levels were measured at each sampled monitoring well. The constituents monitored at the Lakeview site are manganese and sulfate. Monitoring locations that exceeded the U.S. Environmental Protection Agency (EPA) Secondary Maximum Contaminant Levels for these constituents are listed in Table 1. Review of time-concentration graphs included in this report indicate that manganese and sulfate concentrations are consistent with historical measurements.

Authors:
 [1];  [2]
  1. USDOE Office of Legacy Management, Washington, DC (United States)
  2. Navarro Research and Engineering, Inc., Oak Ridge, TN (United States)
Publication Date:
Research Org.:
USDOE Office of Legacy Management, Washington, DC (United States)
Sponsoring Org.:
USDOE Office of Legacy Management (LM), Office of Site Operations (LM-20)
OSTI Identifier:
1351826
Report Number(s):
S00516
DOE Contract Number:  
LM0000421
Resource Type:
Technical Report
Country of Publication:
United States
Language:
English
Subject:
54 ENVIRONMENTAL SCIENCES; 2016 Groundwater Sampling Lakeview, Oregon

Citation Formats

Linard, Joshua, and Hall, Steve. Data Validation Package May 2016 Groundwater Sampling at the Lakeview, Oregon, Processing Site August 2016. United States: N. p., 2016. Web. doi:10.2172/1351826.
Linard, Joshua, & Hall, Steve. Data Validation Package May 2016 Groundwater Sampling at the Lakeview, Oregon, Processing Site August 2016. United States. doi:10.2172/1351826.
Linard, Joshua, and Hall, Steve. Mon . "Data Validation Package May 2016 Groundwater Sampling at the Lakeview, Oregon, Processing Site August 2016". United States. doi:10.2172/1351826. https://www.osti.gov/servlets/purl/1351826.
@article{osti_1351826,
title = {Data Validation Package May 2016 Groundwater Sampling at the Lakeview, Oregon, Processing Site August 2016},
author = {Linard, Joshua and Hall, Steve},
abstractNote = {This biennial event includes sampling five groundwater locations (four monitoring wells and one domestic well) at the Lakeview, Oregon, Processing Site. For this event, the domestic well (location 0543) could not be sampled because no one was in residence during the sampling event (Note: notification was provided to the resident prior to the event). Per Appendix A of the Groundwater Compliance Action Plan, sampling is conducted to monitor groundwater quality on a voluntary basis. Sampling and analyses were conducted as specified in the Sampling and Analysis Plan for U.S. Department of Energy Office of Legacy Management Sites (LMS/PRO/S04351, continually updated). One duplicate sample was collected from location 0505. Water levels were measured at each sampled monitoring well. The constituents monitored at the Lakeview site are manganese and sulfate. Monitoring locations that exceeded the U.S. Environmental Protection Agency (EPA) Secondary Maximum Contaminant Levels for these constituents are listed in Table 1. Review of time-concentration graphs included in this report indicate that manganese and sulfate concentrations are consistent with historical measurements.},
doi = {10.2172/1351826},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Mon Aug 01 00:00:00 EDT 2016},
month = {Mon Aug 01 00:00:00 EDT 2016}
}

Technical Report:

Save / Share: