skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: STOMP-W

Abstract

STOMP is a numerical simulator, developed by PNNL, for solving problems involving multifluid coupled flow and reactive transport in geologic media. The code has been under development at PNNL for more than twentyfive years. This release of STOMP will allow users to directly access the software, and will be limited to selected operational modes. The initial release will include STOMPW. Additional operational modes will be released depending on market trends and user needs.The STOMP simulator has been available to parties outside of PNNL via license agreements. A new trend in projects supported by the U.S. government is that software be available as open source. This release of the STOMP software will meet that need. The initial target operational mode, STOMPW, is one that solves isothermal problems involving variably saturated geologic systems with nonreactive solutes and reactive species. The capabilities of this simulator are often applied to environmental stewardship and restoration problems, such as those at the Hanford Site.

Publication Date:
Research Org.:
Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
Sponsoring Org.:
USDOE
Contributing Org.:
Battelle Pacific Northwest Division (PNNL)
OSTI Identifier:
1345119
Report Number(s):
STOMP-W; 005180WKSTN00
Battelle IPID 31060-E
DOE Contract Number:
AC05-76RL01830
Resource Type:
Software
Software Revision:
00
Software Package Number:
005180
Software CPU:
WKSTN
Open Source:
Yes
Available at http://stomp.pnnl.gov/capabilities/op_modes.stm along with related information
Source Code Available:
Yes
Other Software Info:
The STOMP simulator is competitive with the offerings of the other national laboratories (e.g, TOUGH at LBNL, FEHM at LANL, PFLOTRAN at SNL, NUFT at LLNL, Falcon at INL) for solving subsurface multifluid flow and reactive transport problems. Each of these simulators are mature computer codes. The capabilities of the STOMPW simulator with its ECKEChem module are core capabilities of all the listed national laboratory codes. At this writing PFLOTRAN is known to be available as open source.
Related Software:
Three linear system solvers can be linked to STOMP: 1) splib, 2) Lis, and 3) PETSc.
Country of Publication:
United States

Citation Formats

. STOMP-W. Computer software. https://www.osti.gov//servlets/purl/1345119. Vers. 00. USDOE. 17 Feb. 2017. Web.
. (2017, February 17). STOMP-W (Version 00) [Computer software]. https://www.osti.gov//servlets/purl/1345119.
. STOMP-W. Computer software. Version 00. February 17, 2017. https://www.osti.gov//servlets/purl/1345119.
@misc{osti_1345119,
title = {STOMP-W, Version 00},
author = {},
abstractNote = {STOMP is a numerical simulator, developed by PNNL, for solving problems involving multifluid coupled flow and reactive transport in geologic media. The code has been under development at PNNL for more than twentyfive years. This release of STOMP will allow users to directly access the software, and will be limited to selected operational modes. The initial release will include STOMPW. Additional operational modes will be released depending on market trends and user needs.The STOMP simulator has been available to parties outside of PNNL via license agreements. A new trend in projects supported by the U.S. government is that software be available as open source. This release of the STOMP software will meet that need. The initial target operational mode, STOMPW, is one that solves isothermal problems involving variably saturated geologic systems with nonreactive solutes and reactive species. The capabilities of this simulator are often applied to environmental stewardship and restoration problems, such as those at the Hanford Site.},
url = {https://www.osti.gov//servlets/purl/1345119},
doi = {},
year = {Fri Feb 17 00:00:00 EST 2017},
month = {Fri Feb 17 00:00:00 EST 2017},
note =
}

Software:
To order this software, request consultation services, or receive further information, please fill out the following request.

Save / Share:
  • This paper presents the Simulation, Tactical Operations and Mission Planning (STOMP) software architecture and framework for simulating, controlling and communicating with unmanned air vehicles (UAVs) servicing large distributed sensor networks. STOMP provides hardware-in-the-loop capability enabling real UAVs and sensors to feedback state information, route data and receive command and control requests while interacting with other real or virtual objects thereby enhancing support for simulation of dynamic and complex events.
  • This STOMP (Subsurface Transport Over Multiple Phases) guide document describes the theory, use, and application of the STOMP-CO2 and STOMP-CO2e operational modes. These operational modes of the STOMP simulator are configured to solve problems involving the sequestration of CO2 in geologic saline reservoirs. STOMP-CO2 is the isothermal version and STOMP-CO2e is the nonisothermal version. These core operational modes solve the governing conservation equations for component flow and transport through geologic media; where, the STOMP-CO2 components are water, CO2 and salt and the STOMP-CO2e operational mode also includes an energy conservation equation. Geochemistry can be included in the problem solution viamore » the ECKEChem (Equilibrium-Conservation-Kinetic-Equation Chemistry) module, and geomechanics via the EPRMech (Elastic-Plastic-Rock Mechanics) module. This addendum is designed to provide the new user with a full guide for the core capabilities of the STOMP-CO2 and -CO2e simulators, and to provide the experienced user with a quick reference on implementing features. Several benchmark problems are provided in this addendum, which serve as starting points for developing inputs for more complex problems and as demonstrations of the simulator’s capabilities.« less
  • Acceptance Testing of the WRAP 1 Plant Control System software was conducted throughout the construction of WRAP 1 with final testing on the glovebox software being completed in December 1996. The software tests were broken out into five sections; one for each of the four Local Control Units and one for the supervisory software modules. This document contains a completed copy of the software tests along with the applicable test log and completed Exception Test Reports. The ETRs outside the scope of the contractor are not signed off. These will be resolved by the Buyer and all 1280 open issuesmore » will be tracked on Buyer`s ETR database pending resolution.« less
  • Acceptance Testing of the WRAP 1 Plant Control System software will be conducted throughout the construction of WRAP 1 with final testing on the glovebox software being completed in December 1996. The software tests will be broken out into five sections; one for each of the four Local Control Units and one for the supervisory software modules. The acceptance test report will contain completed copies of the software tests along with the applicable test log and completed Exception Test Reports.
  • This report documents the test performed under `Acceptance Test Procedure WHC-SD-W030-ATP-011, Rev. 0`, for `Project W-030 Tank Farm Ventilation Upgrade`. This report covers testing of the Software Control Logic for the MICON Monitoring and Control System (MCS).

To initiate an order for this software, request consultation services, or receive further information, fill out the request form below. You may also reach us by email at: .

OSTI staff will begin to process an order for scientific and technical software once the payment and signed site license agreement are received. If the forms are not in order, OSTI will contact you. No further action will be taken until all required information and/or payment is received. Orders are usually processed within three to five business days.

Software Request

(required)
(required)
(required)
(required)
(required)
(required)
(required)
(required)