skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Camellia v1.0 Manual: Part I

Abstract

Camellia began as an effort to simplify implementation of efficient solvers for the discontinuous Petrov-Galerkin (DPG) finite element methodology of Demkowicz and Gopalakrishnan. Since then, the feature set has expanded, to allow implementation of traditional continuous Galerkin methods, as well as discontinuous Galerkin (DG) methods, hybridizable DG (HDG) methods, first-order-system least squares (FOSLS), and the primal DPG method. This manual serves as an introduction to using Camellia. We begin, in Section 1.1, by describing some of the core features of Camellia. In Section 1.2 we provide an outline of the manual as a whole.

Authors:
 [1]
  1. Argonne National Lab. (ANL), Argonne, IL (United States). Argonne Leadership Computing Facility
Publication Date:
Research Org.:
Argonne National Lab. (ANL), Argonne, IL (United States)
Sponsoring Org.:
USDOE Office of Science (SC)
OSTI Identifier:
1334186
Report Number(s):
ANL/ALCF-16/3
130782
DOE Contract Number:
AC02-06CH11357
Resource Type:
Technical Report
Country of Publication:
United States
Language:
English
Subject:
97 MATHEMATICS AND COMPUTING

Citation Formats

Roberts, Nathan V. Camellia v1.0 Manual: Part I. United States: N. p., 2016. Web. doi:10.2172/1334186.
Roberts, Nathan V. Camellia v1.0 Manual: Part I. United States. doi:10.2172/1334186.
Roberts, Nathan V. 2016. "Camellia v1.0 Manual: Part I". United States. doi:10.2172/1334186. https://www.osti.gov/servlets/purl/1334186.
@article{osti_1334186,
title = {Camellia v1.0 Manual: Part I},
author = {Roberts, Nathan V.},
abstractNote = {Camellia began as an effort to simplify implementation of efficient solvers for the discontinuous Petrov-Galerkin (DPG) finite element methodology of Demkowicz and Gopalakrishnan. Since then, the feature set has expanded, to allow implementation of traditional continuous Galerkin methods, as well as discontinuous Galerkin (DG) methods, hybridizable DG (HDG) methods, first-order-system least squares (FOSLS), and the primal DPG method. This manual serves as an introduction to using Camellia. We begin, in Section 1.1, by describing some of the core features of Camellia. In Section 1.2 we provide an outline of the manual as a whole.},
doi = {10.2172/1334186},
journal = {},
number = ,
volume = ,
place = {United States},
year = 2016,
month = 9
}

Technical Report:

Save / Share:
  • DCPT (Dual-Continuum Particle Tracker) V1.0 is a new software for simulating solute transport in the subsurface. It is based on the random-walk method for modeling transport processes such as advection, dispersion/diffusion, linear sorption, radioactive decay, and fracture-matrix mass exchange (in fractured porous media). The user shall provide flow-field and other parameters in the form of input files. In Comparison to several analytical and numerical solutions for a number of test cases, DCPT shows excellent performance in both accuracy and efficiency. This report serves as a user's manual of DCPT V1.0. It includes theoretical basis, numerical methods, software structure, input/output description,more » and examples.« less
  • TOUGH+HYDRATE v1.0 is a new code for the simulation of the behavior of hydrate-bearing geologic systems. By solving the coupled equations of mass and heat balance, TOUGH+HYDRATE can model the non-isothermal gas release, phase behavior and flow of fluids and heat under conditions typical of common natural CH{sub 4}-hydrate deposits (i.e., in the permafrost and in deep ocean sediments) in complex geological media at any scale (from laboratory to reservoir) at which Darcy's law is valid. TOUGH+HYDRATE v1.0 includes both an equilibrium and a kinetic model of hydrate formation and dissociation. The model accounts for heat and up to fourmore » mass components, i.e., water, CH{sub 4}, hydrate, and water-soluble inhibitors such as salts or alcohols. These are partitioned among four possible phases (gas phase, liquid phase, ice phase and hydrate phase). Hydrate dissociation or formation, phase changes and the corresponding thermal effects are fully described, as are the effects of inhibitors. The model can describe all possible hydrate dissociation mechanisms, i.e., depressurization, thermal stimulation, salting-out effects and inhibitor-induced effects. TOUGH+HYDRATE is the first member of TOUGH+, the successor to the TOUGH2 [Pruess et al., 1991] family of codes for multi-component, multiphase fluid and heat flow developed at the Lawrence Berkeley National Laboratory. It is written in standard FORTRAN 95, and can be run on any computational platform (workstation, PC, Macintosh) for which such compilers are available.« less
  • The NORGE-P code processes the output of the assembly analysis codes, EPRI-CPM, CASMO-1E or PDQ7-E, into input for the nodal codes, SIMULATE-E or NODE-P2, for the purpose of Pressurized Water Reactor Analysis. It also provides the kinetics data for the SIMTRAN code for subsequent linkage into RETRAN and a file of cross sections and kinetics data for use by NTPREP and ARROTTA. 13 refs., 7 tabs.