Compilation of LLNL CUP-2 Data

Technical Report · Sun Jul 31 00:00:00 EDT 2016

DOI:https://doi.org/10.2172/1325861· OSTI ID:1325861

Eppich, G. ^[1]; Kips, R. ^[1]; Lindvall, R. ^[1]

---

1. Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

The CUP-2 uranium ore concentrate (UOC) standard reference material, a powder, was produced at the Blind River uranium refinery of Eldorado Resources Ltd. in Canada in 1986. This material was produced as part of a joint effort by the Canadian Certified Reference Materials Project and the Canadian Uranium Producers Metallurgical Committee to develop a certified reference material for uranium concentration and the concentration of several impurity constituents. This standard was developed to satisfy the requirements of the UOC mining and milling industry, and was characterized with this purpose in mind. To produce CUP-2, approximately 25 kg of UOC derived from the Blind River uranium refinery was blended, homogenized, and assessed for homogeneity by X-ray fluorescence (XRF) analysis. The homogenized material was then packaged into bottles, containing 50 g of material each, and distributed for analysis to laboratories in 1986. The CUP-2 UOC standard was characterized by an interlaboratory analysis program involving eight member laboratories, six commercial laboratories, and three additional volunteer laboratories. Each laboratory provided five replicate results on up to 17 analytes, including total uranium concentration, and moisture content. The selection of analytical technique was left to each participating laboratory. Uranium was reported on an “as-received” basis; all other analytes (besides moisture content) were reported on a “dry-weight” basis. A bottle of 25g of CUP-2 UOC standard as described above was purchased by LLNL and characterized by the LLNL Nuclear Forensics Group. Non-destructive and destructive analytical techniques were applied to the UOC sample. Information obtained from short-term techniques such as photography, gamma spectrometry, and scanning electron microscopy were used to guide the performance of longer-term techniques such as ICP-MS. Some techniques, such as XRF and ICP-MS, provided complementary types of data. The results indicate that the CUP-2 standard has a natural isotopic ratio, and does not appear to have been isotopically enriched or depleted in any way, and was not contaminated by a source of uranium with a non-natural isotopic composition. Furthermore, the lack of ²³³U and ₂₃₆U above the instrumental detection limit indicates that this sample was not exposed to a neutron flux, which would have generated one or both of these isotopes in measurable concentrations.

• Research Organization: Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
• Sponsoring Organization: USDOE
• DOE Contract Number: AC52-07NA27344
• OSTI ID: 1325861
• Report Number(s): LLNL-TR-701561; TRN: US1700010
• Country of Publication: United States
• Language: English

Related Subjects

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMISTRY
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEAR CHEMISTRY
URANIUM
LAWRENCE LIVERMORE NATIONAL LABORATORY
ISOTOPE RATIO
X-RAY FLUORESCENCE ANALYSIS
CALIBRATION STANDARDS
URANIUM ORES
INTERLABORATORY COMPARISONS
ORE CONCENTRATES
IMPURITIES
POWDERS
PHOTOGRAPHY
GAMMA SPECTROSCOPY
SCANNING ELECTRON MICROSCOPY
ICP MASS SPECTROSCOPY