skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Fabrication of a Mini-SAR Antenna Array using Ultrasonic Consolidation and Direct-Write.

Abstract

Abstract not provided.

Authors:
; ; ; ; ; ; ; ; ;
Publication Date:
Research Org.:
Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
Sponsoring Org.:
USDOE National Nuclear Security Administration (NNSA)
OSTI Identifier:
1267093
Report Number(s):
SAND2007-0933C
524200
DOE Contract Number:
AC04-94AL85000
Resource Type:
Conference
Resource Relation:
Conference: Proposed for presentation at the Rapid Manufacturing Internation Conference held July 11-12, 2007 in Loughborough University, UK.
Country of Publication:
United States
Language:
English

Citation Formats

Branch, Karen Marie Coperich, Palmer, Jeremy A, Strassner, Bernd H.,, Robinson, Christopher, Stucker, Brent, Navarrete, Misael, Lopes, Amit, McDonald, Eric, Medina, Francisco, and Wicker, Ryan. Fabrication of a Mini-SAR Antenna Array using Ultrasonic Consolidation and Direct-Write.. United States: N. p., 2007. Web.
Branch, Karen Marie Coperich, Palmer, Jeremy A, Strassner, Bernd H.,, Robinson, Christopher, Stucker, Brent, Navarrete, Misael, Lopes, Amit, McDonald, Eric, Medina, Francisco, & Wicker, Ryan. Fabrication of a Mini-SAR Antenna Array using Ultrasonic Consolidation and Direct-Write.. United States.
Branch, Karen Marie Coperich, Palmer, Jeremy A, Strassner, Bernd H.,, Robinson, Christopher, Stucker, Brent, Navarrete, Misael, Lopes, Amit, McDonald, Eric, Medina, Francisco, and Wicker, Ryan. 2007. "Fabrication of a Mini-SAR Antenna Array using Ultrasonic Consolidation and Direct-Write.". United States. doi:. https://www.osti.gov/servlets/purl/1267093.
@article{osti_1267093,
title = {Fabrication of a Mini-SAR Antenna Array using Ultrasonic Consolidation and Direct-Write.},
author = {Branch, Karen Marie Coperich and Palmer, Jeremy A and Strassner, Bernd H., and Robinson, Christopher and Stucker, Brent and Navarrete, Misael and Lopes, Amit and McDonald, Eric and Medina, Francisco and Wicker, Ryan},
abstractNote = {Abstract not provided.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = 2007,
month = 2
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:
  • Abstract not provided.
  • General principles of laser direct-write deposition processes are reviewed. Device interconnection of CMOS gate arrays by means of computer-controlled, laser-induced thermchemical surface reactions is described. Maskless, automated five-minute interconnection of 1000 gate CMOS array dies is described using discretionary laser-induced chemical vapor deposition. Eight 125-stage ring oscillators written on a single CMOS gate array die were shown to have the device-limited performance of similar patterns manufactured by a photolithographically patterned aluminum-silicon alloy. These results suggest the feasibility of using this method, Laser Pantography (LP), for rapid implementation of prototype and limited volume semi-custom VLSI circuits immediately after their design ismore » completed.« less
  • The need for advanced (electronic) ceramic components with smaller size, greater functionality, and enhanced reliability requires the ability to integrate electronic ceramics in complex 3-D architectures. For rapid prototyping and small-lot manufacturing, traditional tape casting and screen printing approaches are poorly suited. To address this need, the authors are developing a direct-write approach for fabricating highly integrated, multilayer components using a micropen to deposit slurries in precise patterns. With this technique, components can be constructed layer by layer, simplifying fabrication. It can also be used to produce structures combining several materials in a single layer. The parts are either cofiredmore » or sequentially fired, after each layer is deposited. Since differential shrinkage can lead to defects in these multilayer structures, they are characterizing the sintering behavior of individual layers. This technique has been used to fabricate devices such integrated RC filters, multilayer voltage transformers, and other passive components. The direct-write approach provides the ability to fabricate multifunctional, multimaterial integrated ceramic components (MMICCs) in an agile and rapid way.« less
  • The need for advanced (electronic) ceramic components with smaller size, greater functionality, and enhanced reliability requires the ability to integrate electronic ceramics in complex 3-D architectures. However, traditional tape casting and screen printing approaches are poorly suited to the requirements of rapid prototyping and small lot manufacturing. To address this need, the authors are developing a direct write approach for fabricating highly integrated, multilayer components using a micropen to deposit slurries in precise patterns. This approach provides the ability to fabricate multifunctional, multimaterial integrated ceramic components (MMICCs) in an agile and rapid way, and has been used to make integratedmore » passive devices such RC filters, inductors, and voltage transformers.« less