Investigation of grain-scale microstructural variability in tantalum using crystal plasticity-finite element simulations

Lim, Hojun; Dingreville, Rémi; Deibler, Lisa A.; Buchheit, Thomas E.; Battaile, Corbett C.

doi:10.1016/j.commatsci.2016.02.022

Title: Investigation of grain-scale microstructural variability in tantalum using crystal plasticity-finite element simulations

Journal Article · Sat Feb 27 00:00:00 EST 2016 · Computational Materials Science

DOI:https://doi.org/10.1016/j.commatsci.2016.02.022· OSTI ID:1265170

Lim, Hojun ^[1]; Dingreville, Rémi ^[1]; Deibler, Lisa A. ^[1]; Buchheit, Thomas E. ^[1]; Battaile, Corbett C. ^[1]

Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

In this research, a crystal plasticity-finite element (CP-FE) model is used to investigate the effects of microstructural variability at a notch tip in tantalum single crystals and polycrystals. It is shown that at the macroscopic scale, the mechanical response of single crystals is sensitive to the crystallographic orientation while the response of polycrystals shows relatively small susceptibility to it. However, at the microscopic scale, the local stress and strain fields in the vicinity of the crack tip are completely determined by the local crystallographic orientation at the crack tip for both single and polycrystalline specimens with similar mechanical field distributions. Variability in the local metrics used (maximum von Mises stress and equivalent plastic strain at 3% deformation) for 100 different realizations of polycrystals fluctuates by up to a factor of 2–7 depending on the local crystallographic texture. Comparison with experimental data shows that the CP model captures variability in stress–strain response of polycrystals that can be attributed to the grain-scale microstructural variability. In conclusion, this work provides a convenient approach to investigate fluctuations in the mechanical behavior of polycrystalline materials induced by grain morphology and crystallographic orientations.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: AC04-94AL85000

OSTI ID:: 1265170

Alternate ID(s):: OSTI ID: 1341110

Report Number(s):: SAND2015-10192J; PII: S0927025616300490

Journal Information:: Computational Materials Science, Vol. 117, Issue C; ISSN 0927-0256

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 14 works

Citation information provided by
Web of Science

References (48)

On the self-consistent modeling of elastic-plastic behavior of polycrystals Molinari, A.; Ahzi, S.; Kouddane, R. Mechanics of Materials, Vol. 26, Issue 1 https://doi.org/10.1016/S0167-6636(97)00017-3	journal	July 1997
Micro–macro modelling of the effects of the grain size distribution on the plastic flow stress of heterogeneous materials Berbenni, S.; Favier, V.; Berveiller, M. Computational Materials Science, Vol. 39, Issue 1 https://doi.org/10.1016/j.commatsci.2006.02.019	journal	March 2007
A stochastic micromechanical model for elastic properties of functionally graded materials Rahman, S.; Chakraborty, A. Mechanics of Materials, Vol. 39, Issue 6 https://doi.org/10.1016/j.mechmat.2006.08.006	journal	June 2007
Plastic heterogeneities of a copper multicrystal deformed in uniaxial tension: experimental study and finite element simulations Delaire, F.; Raphanel, J. L.; Rey, C. Acta Materialia, Vol. 48, Issue 5 https://doi.org/10.1016/S1359-6454(99)00408-5	journal	March 2000
Effects of lattice misorientations on strain heterogeneities in FCC polycrystals Cheong, Ke-Shen; Busso, Esteban P. Journal of the Mechanics and Physics of Solids, Vol. 54, Issue 4 https://doi.org/10.1016/j.jmps.2005.11.003	journal	April 2006
Fast computation of first-order elastic–plastic closures for polycrystalline cubic-orthorhombic microstructures Knezevic, Marko; Kalidindi, Surya R. Computational Materials Science, Vol. 39, Issue 3 https://doi.org/10.1016/j.commatsci.2006.08.025	journal	May 2007
Delineation of first-order closures for plastic properties requiring explicit consideration of strain hardening and crystallographic texture evolution Knezevic, Marko; Kalidindi, Surya R.; Mishra, Raja K. International Journal of Plasticity, Vol. 24, Issue 2 https://doi.org/10.1016/j.ijplas.2007.05.002	journal	February 2008
Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal Zhao, Z.; Ramesh, M.; Raabe, D. International Journal of Plasticity, Vol. 24, Issue 12 https://doi.org/10.1016/j.ijplas.2008.01.002	journal	December 2008
Representation of the orientation distribution function and computation of first-order elastic properties closures using discrete Fourier transforms Kalidindi, Surya R.; Knezevic, Marko; Niezgoda, Stephen Acta Materialia, Vol. 57, Issue 13 https://doi.org/10.1016/j.actamat.2009.04.055	journal	August 2009
Concurrent multi-scale crush simulations with a crystal plasticity model Najafi, A.; Marin, E. B.; Rais-Rohani, M. Thin-Walled Structures, Vol. 53 https://doi.org/10.1016/j.tws.2011.12.019	journal	April 2012
Investigation of the deformation behavior of Fe–3%Si sheet metal with large grains via crystal plasticity and finite-element modeling Klusemann, Benjamin; Svendsen, Bob; Vehoff, Horst Computational Materials Science, Vol. 52, Issue 1 https://doi.org/10.1016/j.commatsci.2011.03.042	journal	February 2012
Modeling and simulation of deformation behavior, orientation gradient development and heterogeneous hardening in thin sheets with coarse texture Klusemann, Benjamin; Svendsen, Bob; Vehoff, Horst International Journal of Plasticity, Vol. 50 https://doi.org/10.1016/j.ijplas.2013.04.004	journal	November 2013
Local plasticity of Cu-Al polycrystals - measurements and FEM-simulation Ziegenbein, A.; Neuhäuser, H.; Thesing, J. Le Journal de Physique IV, Vol. 08, Issue PR8 https://doi.org/10.1051/jp4:1998850	journal	November 1998
Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation Raabe, D.; Sachtleber, M.; Zhao, Z. Acta Materialia, Vol. 49, Issue 17 https://doi.org/10.1016/S1359-6454(01)00242-7	journal	October 2001
Experimental investigation of plastic grain interaction Sachtleber, M.; Zhao, Z.; Raabe, D. Materials Science and Engineering: A, Vol. 336, Issue 1-2 https://doi.org/10.1016/S0921-5093(01)01974-8	journal	October 2002
A procedure for identifying the plastic behavior of single crystals from the local response of polycrystals Hoc, T.; Crépin, J.; Gélébart, L. Acta Materialia, Vol. 51, Issue 18 https://doi.org/10.1016/S1359-6454(03)00413-0	journal	October 2003
Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials Héripré, E.; Dexet, M.; Crépin, J. International Journal of Plasticity, Vol. 23, Issue 9 https://doi.org/10.1016/j.ijplas.2007.01.009	journal	September 2007
Applying the grid method and infrared thermography to investigate plastic deformation in aluminium multicrystal Badulescu, C.; Grédiac, M.; Haddadi, H. Mechanics of Materials, Vol. 43, Issue 1 https://doi.org/10.1016/j.mechmat.2010.11.001	journal	January 2011
The influence of microstructure on surface strain distributions in a nickel micro-tension specimen Turner, T. J.; Shade, P. A.; Schuren, J. C. Modelling and Simulation in Materials Science and Engineering, Vol. 21, Issue 1 https://doi.org/10.1088/0965-0393/21/1/015002	journal	November 2012
Finite element model of plastically deformed multicrystal Havliček, F.; Kratochvil, J.; Tokuda, M. International Journal of Plasticity, Vol. 6, Issue 3 https://doi.org/10.1016/0749-6419(90)90003-W	journal	January 1990
Active slip in aluminum multicrystals Yao, Z.; Wagoner, R. H. Acta Metallurgica et Materialia, Vol. 41, Issue 2 https://doi.org/10.1016/0956-7151(93)90074-3	journal	February 1993
The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals Bieler, T. R.; Eisenlohr, P.; Roters, F. International Journal of Plasticity, Vol. 25, Issue 9 https://doi.org/10.1016/j.ijplas.2008.09.002	journal	September 2009
Simulation of polycrystal deformation with grain and grain boundary effects Lim, H.; Lee, M. G.; Kim, J. H. International Journal of Plasticity, Vol. 27, Issue 9 https://doi.org/10.1016/j.ijplas.2011.03.001	journal	September 2011
Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models Knezevic, Marko; Drach, Borys; Ardeljan, Milan Computer Methods in Applied Mechanics and Engineering, Vol. 277 https://doi.org/10.1016/j.cma.2014.05.003	journal	August 2014
Incorporation of deformation twinning in crystal plasticity models Kalidindi, Surya R. Journal of the Mechanics and Physics of Solids, Vol. 46, Issue 2 https://doi.org/10.1016/S0022-5096(97)00051-3	journal	February 1998
A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms Wang, H.; Wu, P. D.; Wang, J. International Journal of Plasticity, Vol. 49 https://doi.org/10.1016/j.ijplas.2013.02.016	journal	October 2013
Explicit incorporation of deformation twins into crystal plasticity finite element models Ardeljan, Milan; McCabe, Rodney J.; Beyerlein, Irene J. Computer Methods in Applied Mechanics and Engineering, Vol. 295 https://doi.org/10.1016/j.cma.2015.07.003	journal	October 2015
Modeling and Simulation of Microstructurally Small Crack Formation and Growth in Notched Nickel-base Superalloy Component Owolabi, G. M.; Whitworth, H. A. Journal of Materials Science & Technology, Vol. 30, Issue 3 https://doi.org/10.1016/j.jmst.2013.09.011	journal	March 2014
Simulation-based strategies for microstructure-sensitive fatigue modeling McDowell, David L. Materials Science and Engineering: A, Vol. 468-470 https://doi.org/10.1016/j.msea.2006.08.129	journal	November 2007
A stochastic approach to capture crystal plasticity Zhang, Liangzhe; Dingreville, Rémi; Bartel, Timothy International Journal of Plasticity, Vol. 27, Issue 9 https://doi.org/10.1016/j.ijplas.2011.04.002	journal	September 2011
A stochastic crystal plasticity model with size-dependent and intermittent strain bursts characteristics at micron scale Lin, Peng; Liu, Zhanli; Cui, Yinan International Journal of Solids and Structures, Vol. 69-70 https://doi.org/10.1016/j.ijsolstr.2015.05.024	journal	September 2015
A stochastic crystal plasticity framework for deformation of micro-scale polycrystalline materials Askari, Hesam; Maughan, Michael R.; Abdolrahim, Niaz International Journal of Plasticity, Vol. 68 https://doi.org/10.1016/j.ijplas.2014.11.001	journal	May 2015
Computing property variability of polycrystals induced by grain size and orientation uncertainties Sankaran, Sethuraman; Zabaras, Nicholas Acta Materialia, Vol. 55, Issue 7 https://doi.org/10.1016/j.actamat.2006.11.025	journal	April 2007
Direct numerical simulations in solid mechanics for understanding the macroscale effects of microscale material variability Bishop, Joseph E.; Emery, John M.; Field, Richard V. Computer Methods in Applied Mechanics and Engineering, Vol. 287 https://doi.org/10.1016/j.cma.2015.01.017	journal	April 2015
Tessellation growth models for polycrystalline microstructures Teferra, Kirubel; Graham-Brady, Lori Computational Materials Science, Vol. 102 https://doi.org/10.1016/j.commatsci.2015.02.006	journal	May 2015
Application of generalized non-Schmid yield law to low-temperature plasticity in bcc transition metals Lim, H.; Weinberger, C. R.; Battaile, C. C. Modelling and Simulation in Materials Science and Engineering, Vol. 21, Issue 4 https://doi.org/10.1088/0965-0393/21/4/045015	journal	May 2013
A physically based model of temperature and strain rate dependent yield in BCC metals: Implementation into crystal plasticity Lim, Hojun; Battaile, Corbett C.; Carroll, Jay D. Journal of the Mechanics and Physics of Solids, Vol. 74 https://doi.org/10.1016/j.jmps.2014.10.003	journal	January 2015
An analysis of nonuniform and localized deformation in ductile single crystals Peirce, D.; Asaro, R. J.; Needleman, A. Acta Metallurgica, Vol. 30, Issue 6 https://doi.org/10.1016/0001-6160(82)90005-0	journal	June 1982
Elastic-Plastic Deformation at Finite Strains Lee, E. H. Journal of Applied Mechanics, Vol. 36, Issue 1 https://doi.org/10.1115/1.3564580	journal	March 1969
Bounds and Self-Consistent Estimates for Creep of Polycrystalline Materials Hutchinson, J. W. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 348, Issue 1652 https://doi.org/10.1098/rspa.1976.0027	journal	February 1976
Why anomalous slip in body-centred cubic metals? Seeger, Alfred Materials Science and Engineering: A, Vol. 319-321 https://doi.org/10.1016/S0921-5093(01)00958-3	journal	December 2001
Kinetics of flow stress in crystals with high intrinsic lattice friction Butt, M. Z. Philosophical Magazine, Vol. 87, Issue 24 https://doi.org/10.1080/14786430701370850	journal	August 2007
The effect of microstructural representation on simulations of microplastic ratcheting Dingreville, Rémi; Battaile, Corbett C.; Brewer, Luke N. International Journal of Plasticity, Vol. 26, Issue 5 https://doi.org/10.1016/j.ijplas.2009.09.004	journal	May 2010
Laws for Work-Hardening and Low-Temperature Creep Kocks, U. F. Journal of Engineering Materials and Technology, Vol. 98, Issue 1 https://doi.org/10.1115/1.3443340	journal	January 1976
Temperature and strain-rate dependence of the flow stress of ultrapure tantalum single crystals Werner, M. Physica Status Solidi (a), Vol. 104, Issue 1 https://doi.org/10.1002/pssa.2211040105	journal	November 1987
Grain-scale experimental validation of crystal plasticity finite element simulations of tantalum oligocrystals Lim, H.; Carroll, J. D.; Battaile, C. C. International Journal of Plasticity, Vol. 60 https://doi.org/10.1016/j.ijplas.2014.05.004	journal	September 2014
Coupled elasto-plasticity and damage constitutive equations Lemaitre, Jean Computer Methods in Applied Mechanics and Engineering, Vol. 51, Issue 1-3 https://doi.org/10.1016/0045-7825(85)90026-X	journal	September 1985
Microstructural development in asymmetric processing of tantalum plate Field, D. P.; Yanke, J. M.; Mcgowan, E. V. Journal of Electronic Materials, Vol. 34, Issue 12 https://doi.org/10.1007/s11664-005-0159-5	journal	December 2005

Cited By (2)

A Coupled Crystal Plasticity and Anisotropic Yield Function Model to Identify the Anisotropic Plastic Properties and Friction Behavior of an AA 3003 Alloy Bong, Hyuk Jong; Leem, Dohyun; Lee, Jinwoo Metallurgical and Materials Transactions A, Vol. 49, Issue 1 https://doi.org/10.1007/s11661-017-4406-1	journal	November 2017
Local Ratcheting Phenomena in the Cyclic Behavior of Polycrystalline Tantalum Colas, Damien; Finot, Eric; Flouriot, Sylvain JOM, Vol. 71, Issue 8 https://doi.org/10.1007/s11837-019-03539-z	journal	June 2019

Similar Records

Multi-scale Modeling of Plasticity in Tantalum.

Technical Report · Tue Dec 01 00:00:00 EST 2015 · OSTI ID:1265170

Lim, Hojun; Battaile, Corbett Chandler.; Carroll, Jay; +3 more

Role of crystallographic orientation on intragranular void growth in polycrystalline FCC materials

Journal Article · Fri Sep 10 00:00:00 EDT 2021 · International Journal of Plasticity · OSTI ID:1265170

Christodoulou, Paul G.; Dancette, Sylvain; Lebensohn, Ricardo A.; +2 more

Modeling of stress distributions on the microstructural level in Alloy 600

Conference · Sat Apr 01 00:00:00 EST 1995 · OSTI ID:1265170

Kozaczek, K J; Petrovic, B G; Ruud, C O; +1 more

Related Subjects

36 MATERIALS SCIENCE
Crystal plasticity
Microstructure
Finite elements
Variability
Tantalum

Title: Investigation of grain-scale microstructural variability in tantalum using crystal plasticity-finite element simulations

Citation Formats

References (48)

Cited By (2)

Similar Records

Related Subjects